Abstract:Recently MXenes become the focus of emerging 2D layered materials family owing to their unique properties and promising potential in gas detection. However, the sensitivity and the stability of the pristine MXenes are poor due to their high carrier concentration and abundant active sites on the surface. Herein, superior NH3 sensors with high response and stability were successfully obtained by wrapping the SnO2 nanoparticles on Ti3C2Tx MXene nanosheets via a facile hydrothermal method. The nanostructures, morphologies, and compositions of the Ti3C2Tx MXene-SnO2 composite were systematically characterized by XRD, FTIR, SEM, TEM and XPS techniques. Results show that SnO2 nanoparticles with high specific surface area are uniformly dispersed on the Ti3C2Tx MXene surface, constructing loose heterostructure, which plays a crucial role in gas adsorption/desorption. In the Ti3C2Tx MXene-SnO2 heterostructure, the Ti3C2Tx MXene acts as a signal amplification channel for electron transfer in gas sensing reaction. The sensors exhibit excellent NH3 gas detection at room temperature. Response as high as 75% is observed for 500 ppm NH3 gas. Fast response and recovery times are also obtained, 109 and 342 s, respectively. Moreover, the sensing performances of the Ti3C2Tx MXene-SnO2 composite with various MXene ratios were systematically studied. It is found out that the 16.8%Ti3C2Tx-SnO2 based sensor shows the highest sensitivity in 10∼100 ppm range, and the 9.1%Ti3C2Tx-SnO2 based sensor exhibits the widest detection range. In addition, the selectivity and repeatability were also studied, revealing high selectivity and stability of the Ti3C2Tx MXene-SnO2 composite. Thus, Ti3C2Tx-SnO2 composite provides a new material to design and develop superior room temperature NH3 gas sensors.

Mixed-potential type NH 3 sensor based on stabilized zirconia and Ni 3 V 2 O 8 sensing electrode

Increasing the Sensitivity of an Amperometric, YSZ-based Total-Nox Sensor by Opening the Gas Diffusion Pathways in a Porous La0.8Sr0.2MnO3 Electrode

A mixed-potential type NH3 sensors based on spinel Zn2SnO4 sensing electrode

A selective NH3 gas sensor based on Fe2O3–ZnO nanocomposites at room temperature

Potentiometric Sensor Based on Chromium Vanadate Sensing Electrode for High Temperature Ammonia Detection

Effects of Sintering Temperature on the NH3 Sensing Properties of Mg2Cu0.25Fe1O3.75 Electrode for YSZ-based Potentiometric NH3 Sensor

Sensitivity and selectivity enhancement of the YSZ-based mixed-potential ammonia sensors with flame-spray-made double-sensing electrodes

Ammonia Sensing Performance of Manganese Vanadate at High Temperature

Surface Enhancement Effects of Tiny SnO2 Nanoparticle Modification on Α-Fe2o3 for Room-Temperature NH3 Sensing.

Mixed-Potential Ammonia Sensor Based on a Dense Yttria-Stabilized Zirconia Film Manufactured at Room Temperature by Powder Aerosol Deposition

Tin oxide/graphene composite fabricated via a hydrothermal method for gas sensors working at room temperature

Mesoporous tungsten trioxide for highly sensitive and selective detection of ammonia

An Amperometric Type NO2 Sensor Utilizing La0.7Sr0.3MnO3-δ-NiO Composite Sensing Electrode

Compact Yttria-Stabilized Zirconia Based Total NOx Sensor with a Dual Functional Co3O4/NiO Sensing Electrode

Au nanoparticle-modified ZnO/SnO2 heterojunction nanocomposites for highly sensitive detection of NH3

High Performance Gas Sensors Based on In-Situ Fabricated ZnO/polyaniline Nanocomposite: the Effect of Morphology on the Sensing Properties

Surface Enhancement Effects of Tiny SnO 2 Nanoparticle Modification on α-Fe 2 O 3 for Room-Temperature NH 3 Sensing

Highly Sensitive Ammonia Gas Sensors at Room Temperature Based on the Catalytic Mechanism of N, C Coordinated Ni Single-Atom Active Center

The Effects of Cu-content on Mg 2 Cu X Fe 1 O 3.5+x Electrodes for YSZ-based Mixed-Potential Type NH 3 Sensors

3D substoichiometric MoO3−x/EGaln framework for room temperature NH3 gas sensing

Ti3C2Tx MXene-SnO2 nanocomposite for superior room temperature ammonia gas sensor