Abstract:YSZ-based mixed-potential sensors with double-sensing electrodes were fabricated for ammonia (NH3) detection. ZnO and LaCoO3 nanoparticles prepared by flame spray pyrolysis (FSP) method were used as the sensing materials. The sensing responses of ZnO and LaCoO3 sensing electrodes can be overlapped based on the double-sensing-electrode structure, thereby significantly enhancing the sensitivity compared with the traditional mixed-potential sensors using Pt reference electrode. The sensitivities of this sensor reached up to -102.85, -75.312, -70.165, -48.616 mV/decade to 10 - 50 ppm NH3 at 450, 475, 500, 525 <math>℃</math>, respectively. Moreover, the NO2 interference effects on NH3 detection of ZnO and LaCoO3 electrodes were opposite and can be counteracted based on the double-sensing-electrode structure, eliminating most of the cross-sensitivity to NO2. The double-sensing-electrode sensor exhibited good performance under CO, CH4, NO, NO2 interference, oxygen fluctuation, and humidity variations, and showed good long-term stability. The results of sensing performance exhibited the sensors with double-sensing electrodes have a great potential for application on SCR system of diesel engines. In further studies, each sensing electrode can be optimized respectively and the sensitivity and selectivity of NH3 sensors could be enhanced to a higher level.

Mixed-Potential Ammonia Sensor Based on a Dense Yttria-Stabilized Zirconia Film Manufactured at Room Temperature by Powder Aerosol Deposition

Increasing the Sensitivity of an Amperometric, YSZ-based Total-Nox Sensor by Opening the Gas Diffusion Pathways in a Porous La0.8Sr0.2MnO3 Electrode

A Mixed-Potential Type NH <sub>3</sub> Sensor Based on Spinel Zn <sub>2</sub>SnO <sub>4</sub> Sensing Electrode

A mixed-potential type NH3 sensors based on spinel Zn2SnO4 sensing electrode

Mixed-potential Type NH3 Sensor Based on CoWO4-PdO Sensing Electrode Prepared by Self-Demixing

An Impedimetric NH3 Sensor Based on YSZ and Spinel-Type Oxide with Θ Response

Mixed Potential Nh3 Sensor Based on Mg-Doped Lanthanum Silicate Oxyapatite

Sensitivity and selectivity enhancement of the YSZ-based mixed-potential ammonia sensors with flame-spray-made double-sensing electrodes

Amperometric Ammonia Sensors for Low Detection Limit with BaZr(1-x)YxO3-δ Proton Electrolytes

Improving the stability of an amperometric ammonia sensor based on BaZr0.8Y0.2O3-δ electrolyte with a volatile B2O3 sintering additive

Mixed potential NH<sub>3</sub> sensor based on Ag-Doped La<sub>2</sub>NiO<sub>4+</sub> sensing electrode

Layered Perovskite Oxides Lan+1NinO3n+1 (n = 1, 2, and 3) for Detecting Ammonia under High Temperature

A Highly Sensitive and Selective NH<sub>3</sub> Sensor Based on a Spherical In<sub>2</sub>O<sub>3</sub>-Sensing Electrode Prepared Using the Hydrothermal Method

Sensitivity differences between microporous NaY and hierarchical ZSM-5 modified electrodes as ammonia gas sensor

Enhancing Ammonia Sensing Performance of Ag 2 MoO 4 -based Mixed-Potential Sensor by Introducing Ionic and Electronic Conductance

In Situ Prepared Composite of Polypyrrole and Multi-Walled Carbon Nanotubes Grafted with Sodium Polystyrenesulfonate As Ammonia Gas Sensor with Wide Detection Range

Potentiometric NO2 Sensors Based on Thin Stabilized Zirconia Electrolytes and Asymmetric (La0.8Sr0.2)0.95MnO3 Electrodes

Mixed potential type sensor using stabilized zirconia and La 0.75Sr0.25Cr0.5Mn0.5O3 sensing electrode for NO2 detection

Ammonia detection using nanoporous alumina resistive and surface acoustic wave sensors

The effects of Cu-content on Mg2CuxFe1O3.5+x electrodes for YSZ-based mixed-potential type NH3 sensors

Mixed Potential Type Sensor Using Stabilized Zirconia and La<sub>0.75</sub>Sr<sub>0.25</sub>Cr<sub>0.5</sub>Mn<sub>0.5</sub>O<sub>3</sub> Sensing Electrode for NO<sub>2</sub> Detection