Abstract:YSZ-based mixed-potential sensors with double-sensing electrodes were fabricated for ammonia (NH3) detection. ZnO and LaCoO3 nanoparticles prepared by flame spray pyrolysis (FSP) method were used as the sensing materials. The sensing responses of ZnO and LaCoO3 sensing electrodes can be overlapped based on the double-sensing-electrode structure, thereby significantly enhancing the sensitivity compared with the traditional mixed-potential sensors using Pt reference electrode. The sensitivities of this sensor reached up to -102.85, -75.312, -70.165, -48.616 mV/decade to 10 - 50 ppm NH3 at 450, 475, 500, 525 <math>℃</math>, respectively. Moreover, the NO2 interference effects on NH3 detection of ZnO and LaCoO3 electrodes were opposite and can be counteracted based on the double-sensing-electrode structure, eliminating most of the cross-sensitivity to NO2. The double-sensing-electrode sensor exhibited good performance under CO, CH4, NO, NO2 interference, oxygen fluctuation, and humidity variations, and showed good long-term stability. The results of sensing performance exhibited the sensors with double-sensing electrodes have a great potential for application on SCR system of diesel engines. In further studies, each sensing electrode can be optimized respectively and the sensitivity and selectivity of NH3 sensors could be enhanced to a higher level.

Sensitivity differences between microporous NaY and hierarchical ZSM-5 modified electrodes as ammonia gas sensor

Increasing the Sensitivity of an Amperometric, YSZ-based Total-Nox Sensor by Opening the Gas Diffusion Pathways in a Porous La0.8Sr0.2MnO3 Electrode

High Performance Gas Sensors Based on In-Situ Fabricated ZnO/polyaniline Nanocomposite: the Effect of Morphology on the Sensing Properties

A Mixed-Potential Type NH <sub>3</sub> Sensor Based on Spinel Zn <sub>2</sub>SnO <sub>4</sub> Sensing Electrode

Sensitivity and selectivity enhancement of the YSZ-based mixed-potential ammonia sensors with flame-spray-made double-sensing electrodes

A selective NH3 gas sensor based on Fe2O3–ZnO nanocomposites at room temperature

A mixed-potential type NH3 sensors based on spinel Zn2SnO4 sensing electrode

Mixed-Potential Ammonia Sensor Based on a Dense Yttria-Stabilized Zirconia Film Manufactured at Room Temperature by Powder Aerosol Deposition

Fabrication and deployment of nanodisc ZnO@ZIF-8, ZnO@NA and ZnO@INA core–shell MOFs: enhanced NH3 and HCHO gas sensing

An Impedimetric NH3 Sensor Based on YSZ and Spinel-Type Oxide with Θ Response

Room-temperature high-performance ammonia gas sensor based on layer-by-layer self-assembled molybdenum disulfide/zinc oxide nanocomposite film

High Response and Selectivity Ammonia Sensor Based on WO3/MoO3 Porous and Hollow Microsphere

A Highly Sensitive and Selective NH<sub>3</sub> Sensor Based on a Spherical In<sub>2</sub>O<sub>3</sub>-Sensing Electrode Prepared Using the Hydrothermal Method

Amperometric Ammonia Sensors for Low Detection Limit with BaZr(1-x)YxO3-δ Proton Electrolytes

Surface Enhancement Effects of Tiny SnO2 Nanoparticle Modification on Α-Fe2o3 for Room-Temperature NH3 Sensing.

Layered Perovskite Oxides Lan+1NinO3n+1 (n = 1, 2, and 3) for Detecting Ammonia under High Temperature

Room Temperature NH3 Selective Gas Sensors Based on Double-Shell Hierarchical SnO2@polyaniline Composites

Gas Sensor Based on Nano Zsm-5 Zeolite Films for the Nerve Agent Simulant Dimethylmethylphosphonate Detection

Hierarchical ZnO micro/nanoarchitectures: hydrothermal preparation, characterization and application in the detection of hydrazine

Polyaniline @ Porous Nanosphere SnO2/Zn2SnO4 Nanohybrid for Selective Room Temperature Flexible NH3 Sensor

The effects of Cu-content on Mg2CuxFe1O3.5+x electrodes for YSZ-based mixed-potential type NH3 sensors