Abstract:In the mixed-potential gas sensor, the electrode type, particle size, microstructural morphology, as well as the interface state between the oxide-sensitive electrode and the solid electrolyte, are the key factors for determining the magnitude of the mixed potential. NiO-based material with the addition of Y2O3-stabilized 2 O 3-stabilized ZrO2 2 (YSZ) particles is considered as one of the promising sensitive electrode materials for preparing the mixed-potential NOx x sensors due to its excellent gas sensitivity. In this paper, the preparation technology of NiO-sensitive electrodes is developed and optimized for improving NOx x (NO and NO2) 2 ) gas-sensitivity properties of the NOx x sensors. The experimental results show that the addition of YSZ can effectively improve the agglomeration morphology of NiO particles in the NOx-YSZ-based x-YSZ-based electrode material during high temperature sintering (i.e. 1200 degrees C) and enhance the bonding strength with the solid electrolyte. The sensor which was prepared by using the developed NOx-YSZ-based x-YSZ-based electrode material with the YSZ addition of 20 wt% has the most sensitive response characteristic to NO gas, and its response potential value increases with NO gas concentration. Elevating electrode sintering temperature can increase the size of NiO particles and shorten the length of the three-phase boundary (TPB) in the sensitive electrode. The average length of TPB is the longest in the sensitive electrode sintered at 1000 degrees C which corresponds to the best sensitive response to NO gas. The sensitive electrode's thickness also affects the NO response sensitivity, and the sensor with an electrode thickness of 14 mu m has the most NO response sensitivity. In addition, the NO/NO2 2 gas mixture test results indicate that the current developed sensor is more sensitive to NO2 2 gas than that of NO gas.

Effect of calcination temperature on sensing performance of YSZ based electrochemical H2S gas sensor with a NiFe2O4 electrode

Optimizing Triple Phase Boundary in Ysz Based Electrochemical Gas Sensor for Sensing Ppb-Level H2s at Low-Temperature

Increasing the Sensitivity of an Amperometric, YSZ-based Total-Nox Sensor by Opening the Gas Diffusion Pathways in a Porous La0.8Sr0.2MnO3 Electrode

The effects of sintering temperature of (La 0.8 Sr 0.2 ) 2 FeMnO 6−δ on the NO 2 sensing property for YSZ-based potentiometric sensor

An Enhanced YSZ Gas Sensor through Optimizing Electrode Thickness for ppb-level H2S Detection

YSZ-based mixed potential H2S sensor using La2NiO4 sensing electrode

Sub-ppm H2S Sensor Based on YSZ and Hollow Balls NiMn2O4 Sensing Electrode

Performance Improvement of NiO/YSZ Sensitive Electrode for High Temperature Electrochemical NOx Gas Sensors

The Effects of Sintering Temperature of Mncr2o4 Nanocomposite on the No2 Sensing Property for Ysz-Based Potentiometric Sensor

Effects of Sintering Temperature on the NH3 Sensing Properties of Mg2Cu0.25Fe1O3.75 Electrode for YSZ-based Potentiometric NH3 Sensor

YSZ-based Solid Electrolyte Type Sensor Utilizing ZnMoO4 Sensing Electrode for Fast Detection of Ppb-Level H2S

Effects of YSZ Addition on the Response of La2CuO4 Sensing Electrode for a Potentiometric NOx Sensor

Sensing Properties of YSZ-Based NO Sensors with Double-Perovskite (La0.8sr0.2)2fenio6-Δ Sensing Electrodes

High-sensitivity SO2 Gas Sensor Based on YSZ Electrolyte and SrTiO3 Sensing Electrode

Sensing Properties of YSZ-Based NO Sensors with Double-Perovskite (La<sub>0.8</sub>Sr<sub>0.2</sub>)<sub>2</sub>FeNiO<sub>6-δ</sub> Sensing Electrodes

High NH3 Selectivity of NiFe2O4 Sensing Electrode for Potentiometric Sensor at Elevated Temperature.

Highly Sensitive Detection of H2s Gas at Low Temperature Based on Znco2o4 Microtube Sensors

Mixed-potential Type NO<inf>x</inf> Sensor Using Stabilized Zirconia and Cr<inf>2</inf>O<inf>3</inf>-WO<inf>3</inf> Nanocomposites

Sub-ppb Mixed Potential H2S Gas Sensor Based on YSZ and Nd2AO4 (a=cu, Ba and Ni) As a New Type of Sensing Electrode

CO Response Characteristics of NiFe2O4 Sensing Material at Elevated Temperature

Sensing Properties of YSZ-based NOx Sensors with Double-Perovskite (La0.8sr0.2)2fenio6−δ-Sensing Electrodes