Abstract:In the mixed-potential gas sensor, the electrode type, particle size, microstructural morphology, as well as the interface state between the oxide-sensitive electrode and the solid electrolyte, are the key factors for determining the magnitude of the mixed potential. NiO-based material with the addition of Y2O3-stabilized 2 O 3-stabilized ZrO2 2 (YSZ) particles is considered as one of the promising sensitive electrode materials for preparing the mixed-potential NOx x sensors due to its excellent gas sensitivity. In this paper, the preparation technology of NiO-sensitive electrodes is developed and optimized for improving NOx x (NO and NO2) 2 ) gas-sensitivity properties of the NOx x sensors. The experimental results show that the addition of YSZ can effectively improve the agglomeration morphology of NiO particles in the NOx-YSZ-based x-YSZ-based electrode material during high temperature sintering (i.e. 1200 degrees C) and enhance the bonding strength with the solid electrolyte. The sensor which was prepared by using the developed NOx-YSZ-based x-YSZ-based electrode material with the YSZ addition of 20 wt% has the most sensitive response characteristic to NO gas, and its response potential value increases with NO gas concentration. Elevating electrode sintering temperature can increase the size of NiO particles and shorten the length of the three-phase boundary (TPB) in the sensitive electrode. The average length of TPB is the longest in the sensitive electrode sintered at 1000 degrees C which corresponds to the best sensitive response to NO gas. The sensitive electrode's thickness also affects the NO response sensitivity, and the sensor with an electrode thickness of 14 mu m has the most NO response sensitivity. In addition, the NO/NO2 2 gas mixture test results indicate that the current developed sensor is more sensitive to NO2 2 gas than that of NO gas.

NO Sensing Property and Adsorption Behavior of (la0.8sr0.2) 2Fenio6- Sensitive Electrode for YSZ-based Potentiometric Sensor

Sensing Properties of YSZ-Based NO Sensors with Double-Perovskite (La0.8sr0.2)2fenio6-Δ Sensing Electrodes

Sensing Properties of YSZ-Based NO Sensors with Double-Perovskite (La<sub>0.8</sub>Sr<sub>0.2</sub>)<sub>2</sub>FeNiO<sub>6-δ</sub> Sensing Electrodes

Sensing Properties of YSZ-based NOx Sensors with Double-Perovskite (La0.8sr0.2)2fenio6−δ-Sensing Electrodes

Increasing the Sensitivity of an Amperometric, YSZ-based Total-Nox Sensor by Opening the Gas Diffusion Pathways in a Porous La0.8Sr0.2MnO3 Electrode

The effects of sintering temperature of (La 0.8 Sr 0.2 ) 2 FeMnO 6−δ on the NO 2 sensing property for YSZ-based potentiometric sensor

Nox Sensing Performances of Mixed-Potential-Type Gas Sensor Based on Stabilized-Zirconia and La5/3sr1/3nio4 Sensing Electrode

Effects of YSZ Addition on the Response of La2CuO4 Sensing Electrode for a Potentiometric NOx Sensor

NO<sub>x</sub> Sensing Performances of Mixed-Potential-Type Gas Sensor Based on Stabilized-Zirconia and La<sub>5/3</sub>Sr<sub>1/3</sub>NiO<sub>4</sub> Sensing Electrode

NO 2 -Sensing Properties of La 0.65 Sr 0.35 MnO 3 Synthesized by Self-Propagating Combustion

Superior Sensitive NiFe2O4 Electrode for Mixed-Potential NO2 Sensor

Potentiometric NO2 Sensors Based on Thin Stabilized Zirconia Electrolytes and Asymmetric (La0.8Sr0.2)0.95MnO3 Electrodes

Mixed Potential Type Sensor Using Stabilized Zirconia and La<sub>0.75</sub>Sr<sub>0.25</sub>Cr<sub>0.5</sub>Mn<sub>0.5</sub>O<sub>3</sub> Sensing Electrode for NO<sub>2</sub> Detection

Mixed potential type sensor using stabilized zirconia and La 0.75Sr0.25Cr0.5Mn0.5O3 sensing electrode for NO2 detection

An Amperometric Type NO2 Sensor Utilizing La0.7Sr0.3MnO3-δ-NiO Composite Sensing Electrode

Synthesis of Composite La1.67Sr0.33NiO4–YSZ for a Potentiometric NOx Sensor by Microwave-Assisted Complex-Gel Auto-Combustion

Mixed-Potential-Type Gas Sensors Based on Pt/YSZ Film/LaFeO3 for Detecting NO2

High Performance Mixed Potential Type NO2 Gas Sensor Based on Porous YSZ Layer Formed with Graphite Doping.

Performance Improvement of NiO/YSZ Sensitive Electrode for High Temperature Electrochemical NOx Gas Sensors

Preparation of (La0.8sr0.2)2fenio6-Δ Nanopowder by Pechini Method and Its Sensitivity to NO2

Mesoporous Tungsten Oxide Electrodes for YSZ-based Mixed Potential Sensors to Detect NO2 in the Sub Ppm-Range