Abstract:In the mixed-potential gas sensor, the electrode type, particle size, microstructural morphology, as well as the interface state between the oxide-sensitive electrode and the solid electrolyte, are the key factors for determining the magnitude of the mixed potential. NiO-based material with the addition of Y2O3-stabilized 2 O 3-stabilized ZrO2 2 (YSZ) particles is considered as one of the promising sensitive electrode materials for preparing the mixed-potential NOx x sensors due to its excellent gas sensitivity. In this paper, the preparation technology of NiO-sensitive electrodes is developed and optimized for improving NOx x (NO and NO2) 2 ) gas-sensitivity properties of the NOx x sensors. The experimental results show that the addition of YSZ can effectively improve the agglomeration morphology of NiO particles in the NOx-YSZ-based x-YSZ-based electrode material during high temperature sintering (i.e. 1200 degrees C) and enhance the bonding strength with the solid electrolyte. The sensor which was prepared by using the developed NOx-YSZ-based x-YSZ-based electrode material with the YSZ addition of 20 wt% has the most sensitive response characteristic to NO gas, and its response potential value increases with NO gas concentration. Elevating electrode sintering temperature can increase the size of NiO particles and shorten the length of the three-phase boundary (TPB) in the sensitive electrode. The average length of TPB is the longest in the sensitive electrode sintered at 1000 degrees C which corresponds to the best sensitive response to NO gas. The sensitive electrode's thickness also affects the NO response sensitivity, and the sensor with an electrode thickness of 14 mu m has the most NO response sensitivity. In addition, the NO/NO2 2 gas mixture test results indicate that the current developed sensor is more sensitive to NO2 2 gas than that of NO gas.

Mixed-Potential-Type Gas Sensors Based on Pt/YSZ Film/LaFeO3 for Detecting NO2

High Performance Mixed Potential Type NO2 Gas Sensor Based on Porous YSZ Layer Formed with Graphite Doping.

Mixed potential type sensor using stabilized zirconia and La 0.75Sr0.25Cr0.5Mn0.5O3 sensing electrode for NO2 detection

Mixed Potential Type Sensor Using Stabilized Zirconia and La<sub>0.75</sub>Sr<sub>0.25</sub>Cr<sub>0.5</sub>Mn<sub>0.5</sub>O<sub>3</sub> Sensing Electrode for NO<sub>2</sub> Detection

Mixed-potential Type NO2 Sensor Prepared with CuCr2O4-CuO Composite Sensing Electrode

Potentiometric NO2 Sensors Based on Thin Stabilized Zirconia Electrolytes and Asymmetric (La0.8Sr0.2)0.95MnO3 Electrodes

A Planar, Impedancemetric NO2 Sensor Based on NiO Nanoparticles Sensing Electrode

An Amperometric Type NO2 Sensor Utilizing La0.7Sr0.3MnO3-δ-NiO Composite Sensing Electrode

Mixed-potential type NO2 sensor based on La10Si6O27 electrolyte and WO3 sensing electrode with different morphologies

Investigation on Impedencemetric-type NO2 Sensor Based on La0.75Sr0.25Mn0.5Co0.5O3-δ Sensing Electrode

Efficient nitric oxide sensing on nanostructured La2MMnO6 (M: Co, Cu, Zn) electrodes

Investigation on Impedencemetric-type NO_2 Sensor Based on La_(0.75)Sr_(0.25)Mn_(0.5)Co_(0.5)O_(3-δ) Sensing Electrode

Compact Yttria-Stabilized Zirconia Based Total NOx Sensor with a Dual Functional Co3O4/NiO Sensing Electrode

Conductometric NO2 Gas Sensors Based on MOF-derived Porous ZnO Nanoparticles

Room-Temperature Mixed-Potential Type ppb-Level NO Sensors Based on K 2 Fe 4 O 7 Electrolyte and Ni/Fe–MOF Sensing Electrodes

Pt nanoparticle-functionalized Fe2(MoO4)3 hollow microspheres for parts-per-billion NO2 sensors operated at 80 °C

An Amperometric NO2 Sensor Based on La10Si5NbO27.5 Electrolyte and Nano-Structured CuO Sensing Electrode.

Performance Improvement of NiO/YSZ Sensitive Electrode for High Temperature Electrochemical NOx Gas Sensors

Mixed potential electrochemical NO2 sensor with YSZ ceramic electrolyte for monitoring in online vehicle diagnosis system

Highly sensitive NO2 sensor based on mesoporous ZrO2–WO3 nanotubes composite

The NO<sub>2</sub> Response of Solid Electrolyte Sensors Made Using ZnFe<sub>2</sub>O<sub>4</sub> Electrodes