Abstract:Perovskite-type oxides have received considerable attention as sensing electrode (SE) for solid electrolyte type sensors because of their exceptional sensing performance and compositional flexibility. Herein, non-stoichiometric perovskite oxides (La0.75Sr0.25)(x)CrO3-delta (x = 0.95, 1.0, 1.05) with nano-structure were prepared in porous YSZ backbone by impregnation method as SE for impedancemetric-type NO2 sensor. Because of the non-stoichiometry of SE, the NO2 adsorption capacity and electrochemical activity of SE are effectively enhanced. Consequently, the sensors based on non-stoichiometric SEs exhibit noticeably improved sensitivity to NO2. Meanwhile, instead of module value (|Z|) as response signal in traditional impedancemetric-type NO2 sensor, various parameters including resistive component (Z '), capacitive reactance (Z ''), |Z| and phase angle (Theta) extracted from impedance spectra were explored as the response signals for the present sensor. The sensors using all the extracted signals show excellent sensing performances in NO2 concentration range of 100-700 ppm. Compared with sensor using Z ' or |Z| response, the sensor using Z '' and Theta response can operate at higher frequencies and shows much better selectivity against CH4, CO2 and H-2. Using Z '' as the response signal, the sensor exhibits a higher sensitivity to NO2 than that with other parameter as signal, because the response Delta Z '' values vary linearly with respect to NO2 concentrations instead of logarithmic relation.

Investigation on Impedencemetric-type NO_2 Sensor Based on La_(0.75)Sr_(0.25)Mn_(0.5)Co_(0.5)O_(3-δ) Sensing Electrode

Investigation on Impedencemetric-type NO2 Sensor Based on La0.75Sr0.25Mn0.5Co0.5O3-δ Sensing Electrode

Increasing the Sensitivity of an Amperometric, YSZ-based Total-Nox Sensor by Opening the Gas Diffusion Pathways in a Porous La0.8Sr0.2MnO3 Electrode

A novel impedancemetric NO2 sensor based on nano-structured La0.75Sr0.25Cr0.5Mn0.5O 3-δ prepared by impregnating method

A Novel Impedancemetric No2 Sensor Based On Nano-Structured La0.75sr0.25cr0.5mn0.5o3-Delta Prepared By Impregnating Method

Impedancemetric-type NO2 Sensor Based on Non-Stoichiometric Perovskite Type Sensing Electrode Using Multiple Response Signals

An Amperometric NO2 Sensor Based on Nano-Structured La0.75Sr0.25Cr0.5Mn0.5O3−δ Prepared by Impregnating Method

An Amperometric Type NO2 Sensor Utilizing La0.7Sr0.3MnO3-δ-NiO Composite Sensing Electrode

Influence of process parameters on the sensitivity of an amperometeric NO2 sensor with La0.75Sr0.25Cr0.5Mn0.5O3−δ sensing electrode prepared by the impregnation method

Impedancemetric NO 2 sensor based on Pd doped perovskite oxide sensing electrode conjunction with phase angle response

Study on Impedance NO_2 Sensor Based on La_0.8Sr_0.2CoO_3 Thick Film

Preparation and NO_2 Gas Sensing Properties of La_(0.75)Sr_(0.25)Cr_(0.5)Mn_(0.5)O_3

Study of NO2 sensors based on La0.8Sr0.2Co0.2Fe0.8O3-δ/Ag biphasic composite sensing electrodes

Mixed Potential Type Sensor Using Stabilized Zirconia and La<sub>0.75</sub>Sr<sub>0.25</sub>Cr<sub>0.5</sub>Mn<sub>0.5</sub>O<sub>3</sub> Sensing Electrode for NO<sub>2</sub> Detection

Mixed potential type sensor using stabilized zirconia and La 0.75Sr0.25Cr0.5Mn0.5O3 sensing electrode for NO2 detection

Improvement of the response performance of impedimetric NO<sub>2</sub> sensor by halogen doping of La<sub>0.75</sub>Sr<sub>0.25</sub>CrO<sub>3-</sub> sensing electrode

An Amperometric NO2 Sensor Based on La10Si5NbO27.5 Electrolyte and Nano-Structured CuO Sensing Electrode.

Impedancemetric NO<sub>2</sub>Sensor Based on CoCrFeO<sub>4</sub>Sensing Electrode and La<sub>9.4</sub>Ba<sub>0.6</sub>Si<sub>5.9</sub>W<sub>0.1</sub>O<sub>26.8</sub>Electrolyte with Phase Angle as Response Signals

Amperometric type NO2 sensor based on La0.75Sr0.25Cr0.5Fe0.5O3-δ-Bi2O3 sensing electrode prepared by self-demixing

Impedancemetric NO<sub>2</sub> Sensor Based on CoCrFeO<sub>4</sub> Sensing Electrode and La<sub>9.4</sub>Ba<sub>0.6</sub>Si<sub>5.9</sub>W<sub>0.1</sub>O<sub>26. 8</sub> Electrolyte with Phase Angle as Response Signals

Mixed-potential Type NO2 Sensor Prepared with CuCr2O4-CuO Composite Sensing Electrode