Abstract:A novel amperometric NO2 sensor was fabricated using a nanostructured La0.8Sr0.2MnO3-delta (nano-LSM) sensing electrode (SE) and a Ce0.8Gd0.2O1.9 (CGO) electrolyte. The focus of this study was to extend the electrochemical active site at the three-phase boundary (TPB) and reduce the interfacial resistance by introducing a hybrid ion/ electron conducting porous layer (CGO +LSM) between the SE and the electrolyte. By adjusting the amount of LSM, the effects of the LSM/CGO ratio on the microstructure and sensitivity of the sensor were investigated. The results showed that the addition of LSM did not change the porous structure of the CGO porous skeleton, but the number of pores decreased with the increase of LSM addition, while the size of pores increased with increasing the amount of LSM added. The nano-LSM was prepared in-situ into the porous skeleton by the impregnation technology, which was highly dispersed in the porous skeleton, having reached the bottom of the porous layer with a particle size of less than 100 nm. The sensor with a mixed conductor as the porous layer effectively improved the sensitivity of the sensor. Analysis by electrochemical impedance spectroscopy (EIS) and the distribution of relaxation techniques (DRT) demonstrated that the addition of the electronic conductor LSM into the CGO porous layer significantly reduced the diffusion resistance of the sensor and enhanced the oxygen exchange performance, thus improving the response performance of the sensor. The sensor with 30wt% LSM/CGO porous layer had good reproducibility and excellent stability. The sensor had good anti-interference performance against co-existing CH4, CO2, H2, NO, and NH3, with good linearity between sensor response values and NO2 concentrations over different O2 concentrations and relative humidity (RH).

Impedancemetric NO 2 sensor based on Pd doped perovskite oxide sensing electrode conjunction with phase angle response

Impedancemetric-type NO2 Sensor Based on Non-Stoichiometric Perovskite Type Sensing Electrode Using Multiple Response Signals

In Situ Exsolution of PdO Nanoparticles from Non-Stoichiometric LaFePd0.05O3+δ Electrode for Impedancemetric NO2 Sensor

Investigation on Impedencemetric-type NO2 Sensor Based on La0.75Sr0.25Mn0.5Co0.5O3-δ Sensing Electrode

Investigation on Impedencemetric-type NO_2 Sensor Based on La_(0.75)Sr_(0.25)Mn_(0.5)Co_(0.5)O_(3-δ) Sensing Electrode

Study of NO2 sensors based on La0.8Sr0.2Co0.2Fe0.8O3-δ/Ag biphasic composite sensing electrodes

Impedancemetric NO<sub>2</sub> Sensor Based on CoCrFeO<sub>4</sub> Sensing Electrode and La<sub>9.4</sub>Ba<sub>0.6</sub>Si<sub>5.9</sub>W<sub>0.1</sub>O<sub>26. 8</sub> Electrolyte with Phase Angle as Response Signals

Impedancemetric NO<sub>2</sub>Sensor Based on CoCrFeO<sub>4</sub>Sensing Electrode and La<sub>9.4</sub>Ba<sub>0.6</sub>Si<sub>5.9</sub>W<sub>0.1</sub>O<sub>26.8</sub>Electrolyte with Phase Angle as Response Signals

Improvement of the response performance of impedimetric NO<sub>2</sub> sensor by halogen doping of La<sub>0.75</sub>Sr<sub>0.25</sub>CrO<sub>3-</sub> sensing electrode

Improving response performance of impedimetric NO 2 sensor using NiO-YSZ mixed conductor porous layer

Improving Response Performance of Impedimetric NO2 Sensor Using NiO-YSZ Mixed Conductor Porous Layer

Impedimetric-type NO2 Sensor Based on the P-Nio/n-ninb2o6 Heterojunction Sensing Electrode

A novel impedancemetric NO2 sensor based on nano-structured La0.75Sr0.25Cr0.5Mn0.5O 3-δ prepared by impregnating method

A Novel Impedancemetric No2 Sensor Based On Nano-Structured La0.75sr0.25cr0.5mn0.5o3-Delta Prepared By Impregnating Method

Enhanced Sensing Performance of the Amperometric NO2 Sensor by Use of a Mixed Conductive Porous Layer

Enhanced gas-sensing performance of SnO2/Nb2O5 hybrid nanowires

A Planar, Impedancemetric NO2 Sensor Based on NiO Nanoparticles Sensing Electrode

An Amperometric Type NO2 Sensor Utilizing La0.7Sr0.3MnO3-δ-NiO Composite Sensing Electrode

High-temperature NO2 sensor based on aluminum/indium co-doped lanthanum silicate oxyapatite electrolyte and cobalt-free perovskite oxide sensing electrode

An Amperometric NO2 Sensor Based on Nano-Structured La0.75Sr0.25Cr0.5Mn0.5O3−δ Prepared by Impregnating Method

Potentiometric NO2 Sensors Based on Thin Stabilized Zirconia Electrolytes and Asymmetric (La0.8Sr0.2)0.95MnO3 Electrodes