Abstract:Thermal barrier coating (TBC) materials play important roles in gas turbine engines to protect the Ni-based superalloys from high-temperature airflow damage. In this work, the nano-mechanism of TBC failure is analyzed. A scanning transmission electron microscopy-energy dispersive spectrometer (STEM-EDS)-based analysis method was used to study the influence of element migration on the deformation behavior of the bond–coat (BC) layer during heating. The content of elements in the same region varied greatly at different temperatures, which could prove the contribution of element migration to the deformation of the BC layer. TEM in-situ heating experiments were designed and carried out to study the deformation behavior near the ceramic topcoat (TC)/thermally grown oxide (TGO) and the TGO/BC interface. The TC/TGO interface was deformed violently during heating, and obvious deformation occurred at 100 °C, while the TGO/BC interface was relatively stable. A subset geometric phase analysis method was used for full field-strain measurement. The strain value near the TGO/BC interface was relatively small and did not change significantly at lower temperatures. The TC/TGO interface is more unstable and easier to deform than the TGO/BC interface. The stress and strain evolution in the internal region of TGO at high temperatures was quantitatively analyzed. The TGO layer has a tensile stress of GPa magnitude along the interface direction at the peak position, and the shear stress is small.

Non-destructive Evaluation of Thermally Grown Oxides in Thermal Barrier Coatings Using Impedance Spectroscopy

Evaluation of TGO Growth in Thermal Barrier Coatings Using Impedance Spectroscopy

The Impedance Spectroscopy Study of the Oxides Layer in Thermal Barrier Coatings

Failure Evaluation of Thermal Barrier Coatings by Impedance Spectroscopy

TGO stress growth for Pt-modified aluminide bond coats during high temperature oxidation

Ultrasonic Characterization of Thermally Grown Oxide in Thermal Barrier Coating by Reflection Coefficient Amplitude Spectrum

Non-Destructive Characterisation of Thermal Barrier Coatings Using Impedance Spectroscopy

Effect of TGO on the Tensile Failure Behavior of Thermal Barrier Coatings

Experimental Study of the Thermally Grown Oxide and Interface of Thermal Barrier Coatings Using TEM In-Situ Heating

Nondestructive Evaluation Of Thermal Barrier Coatings Using Impedance Spectroscopy

Evaluation of thermal barrier coating exposed to different oxygen partial pressure environments by impedance spectroscopy

Influences of Cr and Co on the Growth of Thermally Grown Oxide in Thermal Barrier Coating During High-Temperature Exposure

Comprehensive Understanding of the Effect of TGO Growth Modes on Thermal Barrier Coating Failure Based on a Simulation

Effect of Thermal Growth Oxide Composition and Morphology on Local Stresses in Thermal Barrier Coatings

Evaluation of Microstructural Evolution of Thermal Barrier Coatings Exposed to Na2SO4 Using Impedance Spectroscopy

Study of creep parameters of thermal barrier coatings by bending creep tests

Influence of “Island-Like” Oxides in the Bond-Coat on the Stress and Failure Patterns of the Thermal-Barrier Coatings Fabricated by Atmospheric Plasma Spraying During Long-Term High Temperature Oxidation

Influence of Pretreatment on the Growth Behavior of TGO on MCrAlY Bond Coat Surface

Modelling and Analysis of the Oxide Growth Coupling Behaviour of Thermal Barrier Coatings

High-temperature Oxidation and TGO Growth Behavior of Sr.9(Zr.9Yb.05Y.05)O2.8 5 Thermal Barrier Coatings

Characterization and Evaluation of EB-PVD Thermal Barrier Coatings by Impedance Spectroscopy