Abstract:With the rapid emergence of lightweight materials, the joining process of various lightweight materials has developed to a popular research spot in the engineering field. In this work, a novel type of butt form based on the mechanical clinching process was proposed, which is a single-point clinching process. This method contributed to simplify the clinching process while increase the joining efficiency and produce higher economic benefits. The forming forces of 25, 30, 35, 40 and 45 kN were exerted to produce the dissimilar single-point butt joints. In addition, main geometrical parameters of the mechanical interlock structure, static mechanical properties, SEM morphology of the fracture surface and failure details of dissimilar joints were analyzed by experimental method. The experimental results indicated that both static strength and energy absorption capacity of the single-point butt joint produced by AA5052 sheets are proportional to the forming force in the range of 25–45 kN. The single-point butt joint produced with 45 kN forming force has the most outstanding performance on static shearing strength (1014.2 N) and energy absorption value (0.825 J). Neck fracture is the main failure mode during the static strength test in this work. Furthermore, microscopic morphology of the fracture surface on AA5052 single-point butt joint indicates that ductile fracture is the mainly failure form, and the large number of dimples facilitate the absorption of the energy during the fracture process. The process proposed in this work is particularly suited to components that cannot meet the length requirements of the lap form and are subject to comparatively small shearing force.

Comparative Investigation of Three Different Reforming Processes for Clinched Joint to Increase Joining Strength

Steel-aluminum Plastic Clinching of an Inclined Wall Die

Experimental Investigation On The Joining Of Aluminum Alloy Sheets Using Improved Clinching Process

Comparative Investigation of Auxiliary Processes for Increasing the Strength of Clinched Joints

Investigation Of Flat Clinching Process Combined With Material Forming Technology For Aluminum Alloy

Investigation on Mechanical Behavior of Clinched Joint Using Extensible and Flat Die Techniques

Experimental Investigation of the Mechanical Reshaping Process for Joining Aluminum Alloy Sheets with Different Thicknesses

Experimental Study on the Height-Reduced Joints to Increase the Cross-Tensile Strength

Investigation of the Restored Joint for Aluminum Alloy

Forming Mechanism of the Repairing Process on Clinched Joint

Experimental Research on the Compressed Joints with Different Geometrical Parameters

Comparative Study on Two Compressing Methods of Clinched Joints with Dissimilar Aluminum Alloy Sheets

Influence of sheet thickness on mechanical behaviors of the clinched joints produced by single-point butt clinching process

Investigation of mechanical behavior of the reshaped joints realized with different reshaping forces

Research on a single-point butt clinching process with various forming forces

Experimental investigation of the novel dieless clinching process free of blank holder

Research on the Deformation Behaviors of the Clinch Joining of Aluminum Alloy and Quiet Steel Sheets

Numerical and experimental investigations of the reshaped joints with and without a rivet

Investigation of a renovating process for failure clinched joint to join thin-walled structures

Research on mechanical clinching process for dissimilar aluminum alloy sheets with inclined surface

Influence of thickness combinations on mechanical properties of joints produced by clinch riveting with rigid rivet