Abstract:With the evolution of modularization and prefabrication in construction, there is a growing adoption of prefabricated thin-wall steel and aluminum structures for lightweight buildings and interior decoration. Clinching emerges as a proficient method for achieving heterogeneous metal connections, offering benefits such as streamlined processes, reduced material usage, environmental friendliness, and potential for automation. This study focuses on high-strength steel DP590 and aluminum alloy AW5754-H22, exploring various process parameters (including punch diameter, punch fillet radius, extensible die diameter, and extensible die depth) tailored for clinching experiments on thin steel and aluminum plates. The research analyzes how these process parameters affect the geometric characteristics of the joints and investigates their mechanical properties through static shear tests. Findings indicate that interlocks exceeding 0.29 mm lead to neck cracks during the clinching process. Additionally, the energy absorption of the specimens in button separation exceeds that in neck fracture by 44 % under comparable maximum failure loads in static shear. Optimal process parameters identified are SR5605-SR60310, achieving a maximum failure load of 4.14kN and an energy absorption value of 12.37 J in static shear tests. Finally, a method is proposed to calculate the shear strength of steel‐aluminum clinched joints based on the transmission dynamics of infectious diseases model (SIR model), accounting for the influence of geometric parameters on the static performance of the joints. This approach accurately describes the load-displacement curve trend and predicts the static shear strength of steel‐aluminum clinched joints effectively.

Research on the joining of dissimilar aluminum alloys by a dieless clinching process

Steel-aluminum Plastic Clinching of an Inclined Wall Die

Experimental Investigation On The Joining Of Aluminum Alloy Sheets Using Improved Clinching Process

Research on the joining of aluminum alloy and high-strength steel by dieless clinched-adhesive processes

Research on mechanical clinching process for dissimilar aluminum alloy sheets with inclined surface

Research on the Deformation Behaviors of the Clinch Joining of Aluminum Alloy and Quiet Steel Sheets

Experimental investigation of the novel dieless clinching process free of blank holder

Experimental Investigation of the Mechanical Reshaping Process for Joining Aluminum Alloy Sheets with Different Thicknesses

Investigation Of Flat Clinching Process Combined With Material Forming Technology For Aluminum Alloy

Comparative Study on Two Compressing Methods of Clinched Joints with Dissimilar Aluminum Alloy Sheets

Influence of sheet thickness on mechanical behaviors of the clinched joints produced by single-point butt clinching process

Steel‐aluminum clinched joints mechanical properties and strength prediction under different geometric parameters

Investigation on Mechanical Behavior of Clinched Joint Using Extensible and Flat Die Techniques

Experimental Research on the Compressed Joints with Different Geometrical Parameters

Comparative Investigation of Three Different Reforming Processes for Clinched Joint to Increase Joining Strength

Failure analysis of single-point butt clinched joint with dissimilar aluminium alloy sheets

Experimental Study on Reshaping Method for Joining AL5052 Aluminum Alloy Sheets

Mechanical Properties and Failure Behavior of Flow-Drilling Screw-Bonding Joining of Dissimilar Aluminum Alloys under Dynamic Tensile and Fatigue Loading

Experimental Study on the Height-Reduced Joints to Increase the Cross-Tensile Strength

Clinching of Carbon Fiber-Reinforced Composite and Aluminum Alloy

Research on a single-point butt clinching process with various forming forces