Abstract:In this study, Gd0.1Ln0.1Ce0.8O2-& alpha; (Ln = Er, Yb) was prepared by a glycine-nitrate combustion method. The influences of the calcining temperature, codoped ion and addition of sintering additive on the structures, grain sizes and intermediate-temperature electrochemical properties of the samples were investigated. The micromorphologies and crystal structures of the synthesized samples were analyzed using scanning electron microscopy (SEM) and X-ray diffraction (XRD). The relationship between the conductivity and oxygen partial pressure and the H2/O2 fuel cell was also studied. The XRD results showed that the samples were single-phase cubic fluorite structures after being calcined at 1350 degrees C and 1450 degrees C. The sintering additive of ZnO can significantly affect the morphology and density of the obtained ceria electrolytes. The conductivities of 1350-GEDC-ZnO and 1350-GYDC-ZnO reached 4.4 x 10-2 S cm- 1 and 3.4 x 10-2 S cm- 1 at 750 degrees C, respectively. The output performance of the intermediate-temperature thin film fuel cell was also studied by applying the electrolyte with the best electrical property. The maximum output power densities of the 1350-GEDC-ZnO membrane (15 & mu;m) using Ba0.5Sr0.5Co0.8Fe0.2O3-& delta; (BSCF) as the cathode were 296.2 mW cm-2, 406.2 mW cm-2 and 529.1 mW cm-2 at 650 degrees C, 700 degrees C and 750 degrees C, respectively.

Enhanced Electrochemical Properties of Lu-doped BaCeO3 and KCl-NaCl Composite As Electrolyte for Intermediate Temperature Solid Oxide Fuel Cells

BaCe0.9Er1.1O3-α-NaCl-KCl Composite As Electrolyte for Intermediate Temperature Solid Oxide Fuel Cells

Novel SrCe1 − Xybxo3 − Α-(Na/k)cl Composite Electrolytes for Intermediate Temperature Solid Oxide Fuel Cells

Preparation and electrochemical characterization of Er3+-doped ceria-chloride composite electrolyte for intermediate-temperature solid oxide fuel cells

Low Temperature Synthesis of Novel SrCe0.9Yb0.1O3−α-chlorides Composite Electrolytes for Intermediate Temperature Protonic Ceramics Fuel Cells

Intermediate Temperature Electrochemical Properties of Lutetium-Doped SrCeO3/SrZrO3-molten Carbonate Composite Electrolyte

Synthesis and Conductivity of Strontium Cerate Doped by Erbium Oxide and Its Composite Electrolyte for Intermediate Temperature Fuel Cell

SrCe0.9Sm0.1O3-α Compounded with NaCl-KCl As a Composite Electrolyte for Intermediate Temperature Fuel Cell

Low Temperature Synthesize SrCe0.85Er0.15O3－α Using Sol-Gel Method and Its Composite Electrolyte for Intermediate Temperature Fuel Cell

Yb2o3 Doped Zr0.92y0.08o2-(8ysz) And Its Composite Electrolyte For Intermediate Temperature Solid Oxide Fuel Cells

Preparation, Characterization and Intermediate-Temperature Electrochemical Properties of Er3+-Doped Barium Cerate–Sulphate Composite Electrolyte

High-performance Intermediate Temperature Fuel Cells of New SrCe 0.9 Yb 0.1 O 3−α -Inorganic Salt Composite Electrolytes

Low Temperature Synthesis of SrCe0.9Eu0.1O3-α by Sol-Gel Method and SrCe0.9Eu0.1O3-α-NaCl-KCl Composite Electrolyte for Intermediate Temperature Fuel Cells

Novel Doped Barium Cerate–carbonate Composite Electrolyte Material for Low Temperature Solid Oxide Fuel Cells

Intermediate Temperature Fuel Cell Performance of the Composite Electrolyte Ce0.8Gd0.2O2-α-(Li/K)2CO3

A Novel MgO Doped Zr0.92Y0.08O2-α(8YSZ) with NaCl/KCl Composite Electrolyte for Intermediate Temperature Fuel Cells

A new stable BaCeO3-based proton conductor for intermediate-temperature solid oxide fuel cells

A Novel Gd3+ and Yb3+ Co-Doped Ceria-Sulphate Composite Electrolyte for Intermediate-Temperature Fuel Cells

Intermediate Temperature Fuel Cell Durability of Eu-doped SrCeO3-SrZrO3 Solid Solution/ NaCl-KCl Composite Electrolyte

Intermediate Temperature Electrical Properties in 4 Mol% ZnO-doped Zr0.92Y0.08O2-α/NaCl-KCl Composite Electrolyte

Effect of ZnO on the Intermediate-Temperature Electrochemical Properties of Gd0.1Ln0.1Ce0.8O2-α (ln = Er, Yb) for Solid Oxide Membrane Fuel Cells