Abstract:In this study, Gd0.1Ln0.1Ce0.8O2-& alpha; (Ln = Er, Yb) was prepared by a glycine-nitrate combustion method. The influences of the calcining temperature, codoped ion and addition of sintering additive on the structures, grain sizes and intermediate-temperature electrochemical properties of the samples were investigated. The micromorphologies and crystal structures of the synthesized samples were analyzed using scanning electron microscopy (SEM) and X-ray diffraction (XRD). The relationship between the conductivity and oxygen partial pressure and the H2/O2 fuel cell was also studied. The XRD results showed that the samples were single-phase cubic fluorite structures after being calcined at 1350 degrees C and 1450 degrees C. The sintering additive of ZnO can significantly affect the morphology and density of the obtained ceria electrolytes. The conductivities of 1350-GEDC-ZnO and 1350-GYDC-ZnO reached 4.4 x 10-2 S cm- 1 and 3.4 x 10-2 S cm- 1 at 750 degrees C, respectively. The output performance of the intermediate-temperature thin film fuel cell was also studied by applying the electrolyte with the best electrical property. The maximum output power densities of the 1350-GEDC-ZnO membrane (15 & mu;m) using Ba0.5Sr0.5Co0.8Fe0.2O3-& delta; (BSCF) as the cathode were 296.2 mW cm-2, 406.2 mW cm-2 and 529.1 mW cm-2 at 650 degrees C, 700 degrees C and 750 degrees C, respectively.

Low Temperature Synthesis of SrCe0.9Eu0.1O3-α by Sol-Gel Method and SrCe0.9Eu0.1O3-α-NaCl-KCl Composite Electrolyte for Intermediate Temperature Fuel Cells

Low Temperature Synthesize SrCe0.85Er0.15O3－α Using Sol-Gel Method and Its Composite Electrolyte for Intermediate Temperature Fuel Cell

Intermediate Temperature Fuel Cell Durability of Eu-doped SrCeO3-SrZrO3 Solid Solution/ NaCl-KCl Composite Electrolyte

A stable and easily sintering BaCeO3-based proton-conductive electrolyte

Synthesis and Conductivity of Strontium Cerate Doped by Erbium Oxide and Its Composite Electrolyte for Intermediate Temperature Fuel Cell

High-performance Intermediate Temperature Fuel Cells of New SrCe 0.9 Yb 0.1 O 3−α -Inorganic Salt Composite Electrolytes

SrCe0.9Sm0.1O3-α Compounded with NaCl-KCl As a Composite Electrolyte for Intermediate Temperature Fuel Cell

Low Temperature Synthesis of Novel SrCe0.9Yb0.1O3−α-chlorides Composite Electrolytes for Intermediate Temperature Protonic Ceramics Fuel Cells

Novel SrCe1 − Xybxo3 − Α-(Na/k)cl Composite Electrolytes for Intermediate Temperature Solid Oxide Fuel Cells

Intermediate Temperature Fuel Cell Performance of the Composite Electrolyte Ce0.8Gd0.2O2-α-(Li/K)2CO3

Enhanced Electrochemical Properties of Lu-doped BaCeO3 and KCl-NaCl Composite As Electrolyte for Intermediate Temperature Solid Oxide Fuel Cells

Ce0.8Sm0.2O2-α ceramic prepared by sol-gel method at low temperature and its composite electrolyte in intermediate temperature fuel cells

BaCe0.9Er1.1O3-α-NaCl-KCl Composite As Electrolyte for Intermediate Temperature Solid Oxide Fuel Cells

Intermediate Temperature Electrochemical Properties of Lutetium-Doped SrCeO3/SrZrO3-molten Carbonate Composite Electrolyte

Intermediate Temperature Electrochemical Properties of Yb3+ Doped SrCeO3- Carbonate and Chloride Composite Electrolytes

Preparation and electrochemical characterization of Er3+-doped ceria-chloride composite electrolyte for intermediate-temperature solid oxide fuel cells

Synthesis and Intermediate Temperature Electrical Properties of SrCe0.9 Yb0.1 O3-α-LiCl-KCl Composite Electrolyte

Composite Electrolyte Based On Nanostructured Ce0.8sm0.2o1.9 (Sdc) For Low-Temperature Solid Oxide Fuel Cells

Preparation and characterization of nanocrystalline Ce0.8Sm0.2O1.9 for low temperature solid oxide fuel cells based on composite electrolyte

A Novel Gd3+ and Yb3+ Co-Doped Ceria-Sulphate Composite Electrolyte for Intermediate-Temperature Fuel Cells

Effect of ZnO on the Intermediate-Temperature Electrochemical Properties of Gd0.1Ln0.1Ce0.8O2-α (ln = Er, Yb) for Solid Oxide Membrane Fuel Cells