Abstract:Dispersion nuclear fuel elements have promising prospects to be used in advanced nuclear reactors and disposal of nuclear wastes. They consist of fuel meat and cladding, and the fuel meat is a kind of composite fuel in which the fuel particles are embedded in the non-fissile matrix. Prediction of the micro-thermo-mechanical behaviors in dispersion nuclear plates is of importance to their irradiation safety and optimal design. In this study, the heterogeneity of the fuel particles along the thickness direction in the fuel meat is considered. The 3D finite element models have been developed respectively for two cases: (1) variation of fuel particle-particle (PP) distances for the particles near the mid-plane of the fuel meat; (2) variation of the particle-cladding (PC) distances for the fuel particles near the interface between the fuel meat and the cladding. The respective finite strain constitutive relations are developed for the fuel particle, metal matrix and cladding. The developed virtual temperature method is used to simulate irradiation swelling of the fuel particles and irradiation growth of the metal cladding. Effects of the heterogeneous distributions of the fuel particles on the micro temperature fields and the micro stress-strain fields are investigated. The obtained results indicate that: (1) as a whole, the maximum Mises stress, equivalent plastic strain and first principal stress at the matrix between the two closest particles increase with decreasing the particle-particle (PP) distance; existence of large first principal stresses there may be the main factor that induces the matrix failure; (2) variation of the particle-cladding (PC) distance has remarkable effects on the interfacial normal stress and shear stress at the interface between the fuel meat and the cladding; the first principal stress at the cladding near the interface increases dramatically when the fuel particle is closer and closer to the cladding. Thus, the proper distance between the fuel particles and the one between the fuel particle and the cladding should be considered in the optimal design; (3) the micro temperature distribution in the fuel element is hardly affected. (C) 2011 Elsevier B.V. All rights reserved.

Flow and Heat Transfer Characteristics in Plate-Type Fuel Channels after Formation of Blisters on Fuel Elements

Study on Flow Boiling Characteristics in Rectangle Channel After Formation of Blisters

Effect of different blister heights and forms on the void fraction distribution under subcooled boiling in narrow rectangular channel

Analysis of Blistering Mechanism for Dispersion-Type Fuel Plates During Irradiation

Probability Analysis of the Fuel Microsphere Distribution of Dispersion-Type Nuclear Fuel Plates

Blister Damage Evolution in Plastic Liner of Type IV Hydrogen Storage Vessel Studied by Fracture Mechanics

Numerical Simulation of Blistering Behavior in UMo/Zr Monolithic Fuel Plate

Microfluidic fuel cells integrating slanted groove micro-mixers to terminate growth of depletion boundary layer thickness

Experimental study on the plate-type fuel melting behavior based on alternative materials

Modeling of the Heat Transfer Performance of Plate-Type Dispersion Nuclear Fuel Elements

Effects of Porous Fuel Structure on the Irradiation-Induced Thermo-Mechanical Coupling Behavior in Monolithic Fuel Plates

Macro-Mesoscale In-Pile Thermal-Mechanical Behavior Simulation of a UMo/Zr Monolithic Fuel Plate

Effects of Particle Volume Fraction on the Macro-Thermo-Mechanical Behaviors in Plate-Type Dispersion Nuclear Fuel Elements

Finite Element Modeling of Thermal-Mechanical Behaviors of Dispersion Fuel Elements

Effects of Fission Heat and Fuel Swelling on the Thermal-mechanical Behaviors of Dispersion Fuel Elements

Asymmetric Heating and Buoyancy Effects on Heat Transfer of Hydrocarbon Fuel in a Horizontal Square Channel at Supercritical Pressures

Modeling of Irradiation-Induced Damage and Failure Behaviors of Fuel Foil/cladding Interface in UMo/Zr Monolithic Fuel Plates

Snowflake Bionic Flow Channel Design to Optimize the Pressure Drop and Flow Uniform of Proton Exchange Membrane Fuel Cells

Analysis of hypothetical channel flow blockage of a tubular fuel assembly in a 10 MWth nuclear research reactor

Flow distribution analysis of annular fuel with spacer grid

Prediction of the Micro-Thermo-mechanical Behaviors in Dispersion Nuclear Fuel Plates with Heterogeneous Particle Distributions