Flow boiling heat transfer and pressure fluctuation characteristics in a divergent channel with inclined downward-facing heater
Shichang Dong,Yu Jin,Shengjie Gong,Yikai Wu,Wei Li,Qiang Guo,Zhenqin Xiong,Yidan Yuan
DOI: https://doi.org/10.1016/j.applthermaleng.2023.122203
IF: 6.4
2023-12-16
Applied Thermal Engineering
Abstract:The core catcher cooling system is used in nuclear power plant to mitigate the core meltdown accident through flow boiling heat transfer. In order to better understand the flow boiling characteristics in the system, experimental research was conducted on an inclined channel. The flow channel is oriented 15° with a divergent downward-heating surface. The two-phase flow behavior and pressure fluctuations were capture by a high-speed camera and pressure transducer. The inlet mass flux and subcooling effects on flow boiling characteristics were deeply investigated. The inlet mass flux and subcooling conditions are within 100–400 kg/m 2 s and 1–30 K, respectively. The results showed that the boiling curves shift to the higher wall superheat with the increase of mass flux, and the effect of subcooling is weak. The bubble dynamic images by the high-speed camera showed that the bubbles continue to grow and coalesce during the sliding process along the wall. Large bubble blankets are formed periodically upon the boiling surface beyond a heat flux threshold, and they would undergo a rapid condensation process after departing the heating area, which leads to the liquid reversal and accompanied by strong pressure fluctuations. Further, beyond a certain subcooling and heat flux, two-phase flow instability phenomenon appears, which is characterized by complete condensation of bubble blanket accompanied by pressure shocks, meanwhile, the heat transfer coefficient decreases and the wall superheat increases sharply. The bubble blanket frequency could be obtained by the Fast Fourier Transform analysis of pressure, which is positively correlated with the heat flux and is negatively correlated with the mass flux and subcooling. Furthermore, a dimensionless correlation of reduction factor (RF) was proposed, which directly related the bubble blanket characteristics to the thermal–hydraulic parameters.
energy & fuels,engineering, mechanical,thermodynamics,mechanics