Experimental Study On Lens Type Solar Still With Single Slope And Single Basin

Zhilin Sun,Shibiao Fang,Dan Xu,Wenrong Tu

DOI: https://doi.org/10.5004/dwt.2018.21580

IF: 1.1

2018-01-01

Desalination and Water Treatment

Abstract:A basin type single slope active solar still with lenses and external reflectors was constructed and then examined in outdoor experiments in summer in Hangzhou, China. The lens facing the sun was inclined toward the solar still to refract and introduce the sunrays into the solar still. The external reflector was inclined slightly backward to make the reflected sunrays hit the basin liner of the still effectively. Lenses and reflector mirrors were proposed to be attached to the basin type solar still, and an experimental study was conducted to study productivities of different models, such as the solar still with one lens (Model-1), the solar still with two lenses (Model-2), the solar still with three lenses (Model-3), and the solar still with three lenses and one external reflector (Model-4). It was experimentally found that the productivity of Model-1 was almost equal to that of a traditional basin type solar still, and the productivity of Model-2 was 17.46% bigger than that of the traditional basin type solar still. The daily productivity of the basin type still can be increased by 20.32% with a modification using three lenses in Model-3. Model-4 had the maximum distilled water production of about 2.5 kg/m(2)/d. Compared with the traditional still, there was about 32% increment in yield through Model-4, and the hourly production reached peak at about 19:00 o'clock. Model-4 has the optimal heating effect, reducing the heating time (from about 38 degrees C to 50 degrees C) by 83.33%. In the range of the testing time, the water temperature in Model-4 was 10 degrees C higher than that of the traditional solar still on average.