Abstract:Solar driven interfacial evaporation is considered to be a low-carbon, environment-friendly technology for achieving efficient evaporation, but the solar still equipped with the interfacial evaporation structure is found to process low fresh water production rate and production efficiency. In this work, an optimization scheme for the interfacial evaporation structure of the solar still is proposed through the theoretical analysis of the heat and mass transfer process of the interfacial evaporation solar still. The theoretical results show that there are significant differences in the optimization design between the interfacial evaporation solar still and conventional solar stills. The fresh water production rate of interfacial evaporative solar still is less sensitive to the insulation performance of the solar still, while is greatly affected by the convective heat transfer process inside and outside the solar still. The solar still with interfacial evaporation structure can reduce the use of insulation materials to improve the illumination area and reduce the construction cost, without affecting the production efficiency of fresh water. Under the input energy intensity of 1 kW·m−2, when the convective heat transfer process inside the solar still is strengthened, the theoretical fresh water production rate of the interfacial evaporation solar still can be increased by 28 %, and the efficiency can reach 73 %. However, different from the optimization results of the traditional solar still, the enhancement of convective heat transfer process outside the glass cover will lead to the decline of the efficiency of the solar still. The experimental results show that in a monoclinic interfacial evaporation solar still with an evaporation surface area of 60 cm * 60 cm, a high system performance can be achieved by attaching a thin layer of insulation material to the inner wall and using a 2 W fan for forced convection of internal air. Under the outdoor environment with the maximum light intensity of 1 kW·m−2, the production efficiency of fresh water can be stabilized at 62.6 %. This work provides important guidelines for the design and optimization of solar still with interfacial evaporation structure.

Experimental Study of the Distillation Process in a Tilted Cavity

A Practical Method to Evaluate the Thermal Efficiency of Solar Molten Salt Receivers

EXPERIMENTAL STUDY ON A SOLAR DISTILLATION PLANT CHARACTERIZED WITH BUBLLING EVAPORATOR

STEADY EXPERIMENTAL STUDY ON A SOLAR DISTILLATION PLANT CHARACTERIZED WITH MULTI-EFFECT BUBLLING EVAPORATOR

Heat and mass transfer analysis and optimization of passive interfacial solar still

Experimental study of a solar water treatment device with dome structure cover in winter: performance evaluation and comparative analysis

Experimental Study On Lens Type Solar Still With Single Slope And Single Basin

Experimental and Mechanism Analysis of a Tandem Solar Thermal System with Staged Water Level Reduction

Flow Structure in a Water-in-glass Evacuated Tube Solar Water Heater

Performance research and comparison of integrated passive solar-concentrated stills buried in soil: With/without heat recovery

Experimental Analysis of Wet Gas-Liquid Water Mixture Within the Tank of Water in Glass Evacuated Tube Solar Water Heater

Enhanced water production in hemispherical solar stills via solar collector and thermal storage integration: experimental validation

A review on solar stills for brine desalination

CFD simulation of modified solar still for effective condensation and evaporation: energy and exergy analysis

Thermal design strategy for enhanced freshwater harvesting with interfacial evaporation

An experimental exploration of modified basin solar still performance through integration of flat plate collector and built condenser

A novel numerical model for solar still combined with collector and reflector

Experimental Analysis and CFD Modeling for Conventional Basin-Type Solar Still

Experimental evaluation of the wind convection heat transfer on the glass cover of the single‐slope solar still

Updates on Evaporation and Condensation Methods for the Performance Improvement of Solar Stills

Experimental investigation of a solar still system with a preheater and nanophase change materials