Abstract:In the conducted experiment, a transformative change in heat transfer rate and productivity was observed when copper oxide nanoparticles were mixed with petroleum jelly and stored in a copper cylinder within the solar still. The heat transfer rate increased by 20 %, and the daily productivity of the system seen a significant improvement, with a 20 % increase compared to a phase change material (PCM) system and 40 % simple solar still (SS). The dispersed nanoparticle created a modified internal microstructure, forming a network or aggregate structure depending on their concentration and dispersion quality. This modified microstructure significantly improved the efficiency of heat transfer pathways, leading to 20 % faster heat transfer. The novel approach employed in this experiment distinguished itself from traditional solar stills and PCM based system. The exceptional thermal conductivity of the nanoparticles facilitated rapid absorption of solar radiation, resulting in increased energy input to the system and accelerated evaporation processes. The simulation result obtained using Comsol Multiphysics 5.6 indicated that even under solar radiation condition equivalent to zero, the temperature distribution of the nanoparticles enhanced phase change material based solar still system favourable, and heat transfer was efficient. Under zero solar radiation conditions, the phase change material with nanoparticle in solar still system (NPCM) exhibited a temperature 56.9 °C at 19.00 PM in the experimental condition and, in the simulation it has been found 56.1 °C respectively. The simulation results closely aligned with the experimental results. The daily productivity of the PCM and NPCM based homogeneous systems have been found to be 2945 and 4075 mL/m 2 -day higher, respectively, compared to simple solar still (SS) productivity 2120 mL/m 2 -day. Based on these experimental findings, it can be concluded that the NPCM system is more effective than the PCM based and simple solar still system. This can be attributed to the increased thermal conductivity, enhanced heat transfer rate, and improved evaporation rate achieved through the integration of copper oxide nanoparticles. Therefore, in regions with limited access to portable water, the NPCM system proves to be a highly useful and economically viable solution.

Enhancing solar still performance with Plexiglas and jute cloth additions: experimental study

Improving solar still performance: A comparative analysis of conventional and honeycomb pad augmented solar stills

Experimental investigations of a novel solar still with heat storage materials - energy, exergy, economic and environmental analyses

Performance Enhancement of Solar Still Unit Using v-Corrugated Basin, Internal Reflecting Mirror, Flat-Plate Solar Collector and Nanofluids

Evaluation of solar distiller performance using steel wool pads, internal reflectors, and woven wire mesh: economic, environmental, and sustainability analysis

Performance assessment of single slope solar still by the incorporation of palm flower powder and micro phase change material for the augmentation of productivity

Sunlight Concentration Effect Analysis of Lenses on Single-Slope Solar Still

Enhancing the performance of double-slope solar still using nano-enhanced eutectic phase change materials and steel wool fibre as wick material

Innovative integration: Enhancing solar distillation efficiency with modified spherical solar stills

Development of a vacuum double-slope solar still for enhanced freshwater productivity

CFD simulation of modified solar still for effective condensation and evaporation: energy and exergy analysis

Comparative Study of Tubular Solar Stills with Phase Change Material and Nano-Enhanced Phase Change Material

Improving solar still efficiency with nanoparticles – Infused copper cylinders and latent heat storage: An experimental and simulation study

Experimental Study On Lens Type Solar Still With Single Slope And Single Basin

Effect of shading and evaporative cooling of glass cover on the performance of evacuated tube-augmented solar still

Advancing solar distillation efficiency through calcium hydroxide coating and enhanced configuration of mirror-assisted system

Performance enhancement of a tubular solar still by using stepped basins: An experimental approach

Effects of Concentrator Type and Encapsulated Phase Change Material on the Performance of Different Solar Stills: an Experimental Approach

Theoretical and experimental performance analysis of sandstones and marble pieces as thermal energy storage materials inside solar stills

Unveiling the potential of concentric tubular solar stills (CTSS) through comprehensive thermodynamic modeling and analysis

Improved Thermal Performance and Distillate of Conventional Solar Still via Copper Plate, Phase Change Material and CuO Nanoparticles