Abstract:In the conducted experiment, a transformative change in heat transfer rate and productivity was observed when copper oxide nanoparticles were mixed with petroleum jelly and stored in a copper cylinder within the solar still. The heat transfer rate increased by 20 %, and the daily productivity of the system seen a significant improvement, with a 20 % increase compared to a phase change material (PCM) system and 40 % simple solar still (SS). The dispersed nanoparticle created a modified internal microstructure, forming a network or aggregate structure depending on their concentration and dispersion quality. This modified microstructure significantly improved the efficiency of heat transfer pathways, leading to 20 % faster heat transfer. The novel approach employed in this experiment distinguished itself from traditional solar stills and PCM based system. The exceptional thermal conductivity of the nanoparticles facilitated rapid absorption of solar radiation, resulting in increased energy input to the system and accelerated evaporation processes. The simulation result obtained using Comsol Multiphysics 5.6 indicated that even under solar radiation condition equivalent to zero, the temperature distribution of the nanoparticles enhanced phase change material based solar still system favourable, and heat transfer was efficient. Under zero solar radiation conditions, the phase change material with nanoparticle in solar still system (NPCM) exhibited a temperature 56.9 °C at 19.00 PM in the experimental condition and, in the simulation it has been found 56.1 °C respectively. The simulation results closely aligned with the experimental results. The daily productivity of the PCM and NPCM based homogeneous systems have been found to be 2945 and 4075 mL/m 2 -day higher, respectively, compared to simple solar still (SS) productivity 2120 mL/m 2 -day. Based on these experimental findings, it can be concluded that the NPCM system is more effective than the PCM based and simple solar still system. This can be attributed to the increased thermal conductivity, enhanced heat transfer rate, and improved evaporation rate achieved through the integration of copper oxide nanoparticles. Therefore, in regions with limited access to portable water, the NPCM system proves to be a highly useful and economically viable solution.

Improving solar still performance: A comparative analysis of conventional and honeycomb pad augmented solar stills

Enhancing solar still performance with Plexiglas and jute cloth additions: experimental study

Experimental investigations of a novel solar still with heat storage materials - energy, exergy, economic and environmental analyses

Improved Thermal Performance and Distillate of Conventional Solar Still via Copper Plate, Phase Change Material and CuO Nanoparticles

Improving solar still efficiency with nanoparticles – Infused copper cylinders and latent heat storage: An experimental and simulation study

Performance assessment of single slope solar still by the incorporation of palm flower powder and micro phase change material for the augmentation of productivity

Enhancing performance of solar stills ‐ A review

Performance Enhancement of Solar Still Unit Using v-Corrugated Basin, Internal Reflecting Mirror, Flat-Plate Solar Collector and Nanofluids

Enhancing the performance of double-slope solar still using nano-enhanced eutectic phase change materials and steel wool fibre as wick material

Performance evaluation and economic analysis of solar stills made of coir and Bambusa vulgaris fiber reinforced composite and vertical basin approach: a comparative study

Optimizing cord pyramid solar distillers: A comprehensive study on square baffles, reflectors, and phase transition materials

CFD simulation of modified solar still for effective condensation and evaporation: energy and exergy analysis

Sunlight Concentration Effect Analysis of Lenses on Single-Slope Solar Still

Evaluation of solar distiller performance using steel wool pads, internal reflectors, and woven wire mesh: economic, environmental, and sustainability analysis

Comparative thermal model analysis and experimental validation for predicting performance of a pyramidal solar still with integrated pulsating heat pipe

Development of a vacuum double-slope solar still for enhanced freshwater productivity

Experimental study of a solar water treatment device with dome structure cover in winter: performance evaluation and comparative analysis

The efficiency of solar stills with copper-coated sponge cubes for water desalination: A comparative study

Performance Enhancement of a Hybrid Solar Still/Photovoltaic System with Mirror Reflectors, Automatic Water Cooling, and Feed Water Preheating

Performance enhancement of a tubular solar still by using stepped basins: An experimental approach

Effect of shading and evaporative cooling of glass cover on the performance of evacuated tube-augmented solar still