Abstract:Drinking water requirements are rapidly increasing while the availability of drinking water is decreasing. Overcoming this problem requires a sustainable energy source, such as solar energy, to desalinate untreated water. The most essential and simplest application of brackish water desalination is solar distillation. However, a limitation of the widespread use of solar distillation is its low yield. Therefore, several research attempts were made to enhance its productivity. Current work deals with a comprehensive review study on the solar distillation system. It presents the most critical factors and parameters affecting the productivity of solar stills and adjustments made to improve daily yield. Weather factors cannot be controlled but affect the performance of solar stills, such as solar radiation, ambient air temperature, and wind speed, while the operational and design parameters of solar stills can be manipulated, such as controlling the depth of the aquarium water and the thickness and angle of inclination of the glass cover. Improve evaporation and condensation mechanisms by increasing the basin water temperature and decreasing the distiller cover temperature, respectively, and tightening the thermal insulation to reduce heat loss to the surroundings. It was concluded that the productivity of solar stills may improve by increasing solar radiation and wind speed, as well as by decreasing the ambient air temperature. As for operational parameters, productivity improves as the depth of the water decreases and the thickness of the cover decreases. Designally, single-slope solar stills captured more solar radiation at both high and low-latitude stations than their double-slope solar still counterparts. Adding a packed layer to the basin's bottom or attaching a rotating shaft to the basin's surface can also enhance the solar distillation system. It has also been shown that the most effective design approach to improving the performance of solar stills is to use a slowly rotating drum inside the still, which can result in a 200-300 % increase in water production. The review will help researchers understand previous designs and develop a new set of characteristics to increase the solar still system's thermal efficacy and produce more distillate. Additionally, limitations are discussed along with suggestions for future research that might improve the productivity and performance of the basin solar still typical operating conditions.

Optimizing cord pyramid solar distillers: A comprehensive study on square baffles, reflectors, and phase transition materials

3E analysis of enhancing solar distillation performance through innovative wick convex stepped absorber, PCM, and evacuated tube solar water collector: Experimental investigation

Performance assessment of a novel solar distiller with a fountain-shaped basin design embedded with phase change materials enriched with copper oxide nano-additives: A detailed experimental investigation

Investigating the performance of dish solar distiller with phase change material mixed with Al2O3 nanoparticles under different water depths

Experimental investigation on dish solar distiller with modified absorber and phase change material under various operating conditions

Innovative integration: Enhancing solar distillation efficiency with modified spherical solar stills

Investigation of the performance of a double-glazing solar distiller with external condensation and nano-phase change material

Performance Enhancement of Solar Still Unit Using v-Corrugated Basin, Internal Reflecting Mirror, Flat-Plate Solar Collector and Nanofluids

Enhanced water production in hemispherical solar stills via solar collector and thermal storage integration: experimental validation

Development of a vacuum double-slope solar still for enhanced freshwater productivity

Aspects of energy, exergy, economy, and environment for performance evaluation of modified spherical solar still with rotating ball and phase change material

Comparative performance analysis of pyramid-shaped solar distiller augmented with phase change materials enriched with graphite nanoparticles: experimental study

Evaluation of solar distiller performance using steel wool pads, internal reflectors, and woven wire mesh: economic, environmental, and sustainability analysis

Advancing solar distillation efficiency through calcium hydroxide coating and enhanced configuration of mirror-assisted system

Performance of solar still units and enhancement techniques: A review investigation

Rotating-drum solar still with enhanced evaporation and condensation techniques: Comprehensive study

Novel cylindrical solar still integrated with parabolic solar concentrators, vapor extraction fan, and nano-enhanced phase change material

Machine learning-based prediction and augmentation of dish solar distiller performance using an innovative convex stepped absorber and phase change material with nanoadditives

Enhancing solar still performance through innovative modeling, integration with reflectors, and semi-transparent solar cells: A 3E analysis and multi-objective optimization

Improving single-slope passive solar still efficiency through integration of phase change materials and Al2O3 nanoparticles

Improved Thermal Performance and Distillate of Conventional Solar Still via Copper Plate, Phase Change Material and CuO Nanoparticles