Abstract:In the conducted experiment, a transformative change in heat transfer rate and productivity was observed when copper oxide nanoparticles were mixed with petroleum jelly and stored in a copper cylinder within the solar still. The heat transfer rate increased by 20 %, and the daily productivity of the system seen a significant improvement, with a 20 % increase compared to a phase change material (PCM) system and 40 % simple solar still (SS). The dispersed nanoparticle created a modified internal microstructure, forming a network or aggregate structure depending on their concentration and dispersion quality. This modified microstructure significantly improved the efficiency of heat transfer pathways, leading to 20 % faster heat transfer. The novel approach employed in this experiment distinguished itself from traditional solar stills and PCM based system. The exceptional thermal conductivity of the nanoparticles facilitated rapid absorption of solar radiation, resulting in increased energy input to the system and accelerated evaporation processes. The simulation result obtained using Comsol Multiphysics 5.6 indicated that even under solar radiation condition equivalent to zero, the temperature distribution of the nanoparticles enhanced phase change material based solar still system favourable, and heat transfer was efficient. Under zero solar radiation conditions, the phase change material with nanoparticle in solar still system (NPCM) exhibited a temperature 56.9 °C at 19.00 PM in the experimental condition and, in the simulation it has been found 56.1 °C respectively. The simulation results closely aligned with the experimental results. The daily productivity of the PCM and NPCM based homogeneous systems have been found to be 2945 and 4075 mL/m 2 -day higher, respectively, compared to simple solar still (SS) productivity 2120 mL/m 2 -day. Based on these experimental findings, it can be concluded that the NPCM system is more effective than the PCM based and simple solar still system. This can be attributed to the increased thermal conductivity, enhanced heat transfer rate, and improved evaporation rate achieved through the integration of copper oxide nanoparticles. Therefore, in regions with limited access to portable water, the NPCM system proves to be a highly useful and economically viable solution.

Improving single-slope passive solar still efficiency through integration of phase change materials and Al2O3 nanoparticles

Improved solar still productivity using PCM and nano- PCM composites integerated energy storage

Improved Thermal Performance and Distillate of Conventional Solar Still via Copper Plate, Phase Change Material and CuO Nanoparticles

Performance assessment of single slope solar still by the incorporation of palm flower powder and micro phase change material for the augmentation of productivity

Improving solar still efficiency with nanoparticles – Infused copper cylinders and latent heat storage: An experimental and simulation study

Enhancing the performance of double-slope solar still using nano-enhanced eutectic phase change materials and steel wool fibre as wick material

Investigation of the performance of a double-glazing solar distiller with external condensation and nano-phase change material

Theoretical assessment of a solar still system equipped with Nano-phase change materials

Experimental investigation of a solar still system with a preheater and nanophase change materials

Phase change materials (PCMs) for improving solar still productivity: a review

Comparative Study of Tubular Solar Stills with Phase Change Material and Nano-Enhanced Phase Change Material

Productivity enhancement of single-slope solar still with novel bottom finned absorber basin inserted in phase change material (PCM): techno-economic and enviro-economic analysis

Studying the Improvement of Solar Collector Mechanism with Phase Change Materials

Optimizing cord pyramid solar distillers: A comprehensive study on square baffles, reflectors, and phase transition materials

Effects of Concentrator Type and Encapsulated Phase Change Material on the Performance of Different Solar Stills: an Experimental Approach

Improving solar still performance with heat pipe/pulsating heat pipe evacuated tube solar collectors and PCM: An experimental and environmental analysis

Numerical study of PCM-integrated solar still efficiency enhancement

Functional and financial analysis of an inclined step solar desalination using phase change nanomaterials

A Review of New Solar Still Design Comprising a Five-Sided Glass Cover and Equipped with an External Tank for PCM

Performance Enhancement of Solar Still Unit Using v-Corrugated Basin, Internal Reflecting Mirror, Flat-Plate Solar Collector and Nanofluids

Performance assessment of a novel solar distiller with a fountain-shaped basin design embedded with phase change materials enriched with copper oxide nano-additives: A detailed experimental investigation