Abstract:Energy storage in the form of sensible and latent heat is one of the most prominent method to enhance the performance of any solar thermal system. Solar desalination is a viable method to convert saline water into potable water, but due to its lower yield, it cannot be used as a regular source of water. The current investigation deals with the enhancement in water yield of double slope solar still by embedding eutectic phase change material (PCM) (Myristic acid + Stearic acid), nano-enhanced PCM, and wick material (steel wool fibre). Ag 2 O 3 nanoparticles at concentrations of 1.5 wt% were mixed in eutectic PCM to increase the thermal conductivity of nano-enhanced PCM. The energy, exergy, and economic analyses of four various modified cases, namely CSS (still without PCM), DSS-1 (still with eutectic PCM), DSS-2 (still with eutectic PCM and Steel wool fibre), and DSS-3 (still with nano-enhanced eutectic PCM), was carried out in central India (23.24° N and 77.41° E). The findings reveal that the cumulative yields for CSS, DSS-1, DSS-2, and DSS-3 are around 1.82, 2.44, 3.40, and 4.22 kg/m 2 . Additionally, DSS-3 cumulative freshwater production was around 132, 72.9, and 24.1% greater than that of CSS, DSS-1, and DSS-2, respectively. The maximum value of total heat transfer was achieved for DSS-3, which is higher by 45.9% than CSS, 32.8% than DSS-1, and 6.1% than DSS-2. The average energy efficiency of DSS-3 was 49%, which is greater than CSS (22.21%), DSS-1 (30.42%), and DSS-2 (41%). The findings also depict that the combined impact of PCM and nanoparticles displays an average exergy efficiency of 12.2%, which is greater than CSS, DSS-1, and DSS-2 by 3.18, 5.47, and 11%, respectively. Additionally, the economic analysis reveals that the cost per litre value of CSS, DSS-1, DSS-2, and DSS-3 was 1.06, 1.27, 1.22, and 1.07 (Rs/ l ). The integration of PCM-SWF in conventional still increases the cost of water by 13% with an increase in freshwater yield of 92%, whereas the integration of nano-enhanced PCM increases the cost of water by 1% with a tremendous increase in freshwater yield of 130%.

Comparative performance analysis of pyramid-shaped solar distiller augmented with phase change materials enriched with graphite nanoparticles: experimental study

Performance assessment of a novel solar distiller with a fountain-shaped basin design embedded with phase change materials enriched with copper oxide nano-additives: A detailed experimental investigation

Optimizing cord pyramid solar distillers: A comprehensive study on square baffles, reflectors, and phase transition materials

Performance enhancement of pyramid solar distiller using nanofluid integrated with v-corrugated absorber and wick: An experimental study

Investigation of the performance of a double-glazing solar distiller with external condensation and nano-phase change material

3E analysis of enhancing solar distillation performance through innovative wick convex stepped absorber, PCM, and evacuated tube solar water collector: Experimental investigation

Investigating the performance of dish solar distiller with phase change material mixed with Al2O3 nanoparticles under different water depths

Comparative Study of Tubular Solar Stills with Phase Change Material and Nano-Enhanced Phase Change Material

Improving single-slope passive solar still efficiency through integration of phase change materials and Al2O3 nanoparticles

Experimental investigation on dish solar distiller with modified absorber and phase change material under various operating conditions

Experimental investigation of a solar still system with a preheater and nanophase change materials

Theoretical assessment of a solar still system equipped with Nano-phase change materials

Performance assessment of single slope solar still by the incorporation of palm flower powder and micro phase change material for the augmentation of productivity

Using Direct Solar Energy Conversion in Distillation via Evacuated Solar Tube with and without Nanomaterials

Study of the flat plate solar collector's efficiency for sustainable and renewable energy management in a building by a phase change material: Containing paraffin-wax/Graphene and Paraffin-wax/graphene oxide carbon-based fluids

Energy, exergy, economic and environmental (4E) analysis of a parabolic trough solar collector using MXene based silicone oil nanofluids

Experimental comparison investigation on the performance analysis of desert crystal sand roses and sand grain as natural effective heat storage materials in conical solar distillers: 4E and sustainability analyses

Improved Thermal Performance and Distillate of Conventional Solar Still via Copper Plate, Phase Change Material and CuO Nanoparticles

Overcoming shading challenges in solar distillers: A comparative study of copper conical fins and sand-filled fins

Enhancing solar distillation through beeswax-infused tubular solar still with a heat exchanger using parabolic trough collector

Enhancing the performance of double-slope solar still using nano-enhanced eutectic phase change materials and steel wool fibre as wick material