Abstract:Solar driven interfacial evaporation is considered to be a low-carbon, environment-friendly technology for achieving efficient evaporation, but the solar still equipped with the interfacial evaporation structure is found to process low fresh water production rate and production efficiency. In this work, an optimization scheme for the interfacial evaporation structure of the solar still is proposed through the theoretical analysis of the heat and mass transfer process of the interfacial evaporation solar still. The theoretical results show that there are significant differences in the optimization design between the interfacial evaporation solar still and conventional solar stills. The fresh water production rate of interfacial evaporative solar still is less sensitive to the insulation performance of the solar still, while is greatly affected by the convective heat transfer process inside and outside the solar still. The solar still with interfacial evaporation structure can reduce the use of insulation materials to improve the illumination area and reduce the construction cost, without affecting the production efficiency of fresh water. Under the input energy intensity of 1 kW·m−2, when the convective heat transfer process inside the solar still is strengthened, the theoretical fresh water production rate of the interfacial evaporation solar still can be increased by 28 %, and the efficiency can reach 73 %. However, different from the optimization results of the traditional solar still, the enhancement of convective heat transfer process outside the glass cover will lead to the decline of the efficiency of the solar still. The experimental results show that in a monoclinic interfacial evaporation solar still with an evaporation surface area of 60 cm * 60 cm, a high system performance can be achieved by attaching a thin layer of insulation material to the inner wall and using a 2 W fan for forced convection of internal air. Under the outdoor environment with the maximum light intensity of 1 kW·m−2, the production efficiency of fresh water can be stabilized at 62.6 %. This work provides important guidelines for the design and optimization of solar still with interfacial evaporation structure.

Performance study of a passive vertical multiple-effect diffusion solar still directly heated by parabolic concentrator

Experimental investigation on a floating multi-effect solar still with rising seawater film

Experimental Study of the Distillation Process in a Tilted Cavity

Performance research and comparison of integrated passive solar-concentrated stills buried in soil: With/without heat recovery

Sunlight Concentration Effect Analysis of Lenses on Single-Slope Solar Still

Experimental study of a solar water treatment device with dome structure cover in winter: performance evaluation and comparative analysis

Development of a vacuum double-slope solar still for enhanced freshwater productivity

Heat and mass transfer analysis and optimization of passive interfacial solar still

Experimental Study On Lens Type Solar Still With Single Slope And Single Basin

Productivity enhancement of single-slope solar still with novel bottom finned absorber basin inserted in phase change material (PCM): techno-economic and enviro-economic analysis

Enhanced water production in hemispherical solar stills via solar collector and thermal storage integration: experimental validation

A compact flat solar still with high performance

Study on a passive concentrating photovoltaic-membrane distillation integrated system

Experimental investigation on the effective condenser glass area of solar still hybrid with photovoltaic cells

Numerical simulation of the performance of passive and active solar still with corrugated absorber surface as heat storage medium for sustainable solar desalination technology

An experimental exploration of modified basin solar still performance through integration of flat plate collector and built condenser

A portable solar still's productivity boost combining a magnetic stirrer and thermoelectric

Experimental study on a solar-powered cogeneration system for freshwater and electricity production

Three-effect tubular solar desalination system with vacuum operation under actual weather conditions

Thermal design strategy for enhanced freshwater harvesting with interfacial evaporation

Updates on Evaporation and Condensation Methods for the Performance Improvement of Solar Stills