Abstract:In recent years, with the prohibition of CFC by international community, the cascade refrigeration cycle is showing the development of new features, in which Auto-cascade refrigeration cycle with its simple structure, reliable performance particularly has aroused widespread concern. This paper puts forward using the distillation column instead of the multi-stage segregation device, which make full use of the distillation column to provide good enough conditions for the vapour-liquid contact,creat a greater contact surface, ensure the space and time of heat and mass transfer between each component of refrigerant and lubricant, in order to achieve high efficient separation.This cycle uses environment-friendly non-azeotropic mixed (NARM) R600a\R23\R50 as refrigerant. The improved PT equation is used, according to the quality and energy conservation of the distillation column and heat exchanger to carry on thermodynamic analysis. On this basis, the selection and the calculation of the experimental apparatus and equipment carried out to self-made a auto-cascade refrigeration cycle prototype. Through the cooling test of the eight different mixture ratio, the best quality ratio is found and the minimum temperature the ratio can reach. Through repeated experiments, study that the cycle compression ratio of one component affect on the temperature inside the ultra-low temperature box, the cycle compression ratio of the different components under the same temperature inside the ultra-low temperature box affect on the system performance, and the three throttle, cold boxes cycle high and low pressure ratio and distillation column reflux liquid extraction rate affect on the system performance. The prototype broke the traditional method that access to the depth refrigeration needs multiple refrigeration compressors, only use a single-stage air-conditioning refrigeration compressor with lubrication, to achieve high and low boiling point component through the use of distillation devices, including high-performance lubricant separation, successfully reduced to below -80 degrees C, and system stability. According to the results of a series of experiments, analyzed the ratio of working fluid, cycle pressure ratio, distillation column extraction rate of liquid return, increase heat and the expenditure component's effect on the temperature in the ultra-low temperature box and the COP of system.

Study on a Quaternary Working Pair of CaCl2-LiNO3-KNO3/H2O for an Absorption Refrigeration Cycle

Heat Capacities of Four Promising Alternatives to Lithium Bromide Aqueous Solution in Absorption Refrigerators

Experimental Study on an Absorption Refrigeration System at Low Temperatures

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Analysis of a Hybrid System of Adiabatic Absorption two-stage Liquid Desiccant and CO2 Transcritical Cycles

The Contrast Between the Water-Lithium Bromide-Lithium Nitrate and the Water-Lithium Bromide Absorption Refrigeration Cycle

A NOVEL COMBINED EJECTOR-ABSORPTION REFRIGERATION CYCLE

Experimental Research on the Vapor Pressures of CaCl2–H2O and MgCl2–H2O As Working Fluids of Absorption Heat Transformers at High Temperature

Comparison of Experimental Performance of Absorption Refrigeration Cycle Using NH3/LiNO3+H2O Working Fluids with Different Water Component Proportions

A novel low-grade heat-driven absorption refrigeration system with LiCl–H2O and LiBr–H2O working pairs

Pairs Srcl2-Nh4ci-Nh3 And Cacl2-Bacl2-Nh3 For A Two-Stage Adsorption Freezing Cycle Driven By Low-Temperature Heat Source

Experimental Investigation on Working Pairs for a Two?stage Sorption Refrigeration Cycle

Performance Study of Two-Stage Adsorption Refrigeration Cycle Based on CaCl_2/BaCl_2-NH_3 Working Pair

Thermodynamic performance of absorption‐compression hybrid refrigeration cycles based on lithium nitrate+1‐butyl‐3‐methylimidazolium nitrate/water working fluid

Performance Calculation of Single Effect Absorption Heat Pump Using LiBr + LiNO3 + H2O As Working Fluid

A Study On A New Auto-Cascade Refrigerating Cycle

A Numerical Investigation of A Diffusion Absorption Refrigerator Operating with the Binary Refrigerant for Low Temperature Applications

Experimental Evaluation on Thermal Performance of an Air-Cooled Absorption Refrigeration Cycle with NH3–LiNO3 and NH3–NaSCN Refrigerant Solutions

Absorption Behavior for R1234ze(E) and R1233zd(E) in [p66614][cl] As Working Fluids in Absorption Refrigeration Systems

Investigations on Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

Working pairs for resorption refrigerator