Abstract:An experimental and numerical investigation has been performed on the quantitative determination of two-stage heat transfer characteristics of constrained melting process of phase change material (PCM) inside a horizontal cylinder. Melting experiments are conducted with paraffin in a cylinder subjected to different boundary temperatures. The solid-liquid interface and temperature field of PCM are captured using photography and infrared technique, respectively, which are then used to validate the numerical models established based on the enthalpy method. A scale analysis is performed to estimate the order of magnitude of the influence factors. With the validated models, the melting processes of PCM inside a horizontal cylinder covering a wide range of Rayleigh number (Ra), Stefan number (Ste) and Fourier number (Fo) are simulated and analyzed carefully. It is found that the transition point between the conduction and convection stages depends greatly on the Rayleigh number while has little relation with the Stefan number. Particularly, three important Rayleigh numbers are identified: when Ra < 5.0 × 103, the PCM melted in the conduction stage is more than 90%, indicating that the natural convection effect on the melting heat transfer is very weak; when Ra > 3.3 × 107, the PCM melted in the convection stage is more than 90%, so the natural convection dominates the melting process; when Ra = 5.3 × 104, the PCM melted in conduction and convection stages are both equal to 50%. For the conduction stage, the heat transfer characteristics depend only on the dimensionless melting time (FoSte), while for the convection stage, the heat transfer characteristics depend not only on the Fourier and Stefan numbers, but also on the Rayleigh number. Based on the numerical and the scale analysis results, the correlation for the dimensionless transition melting time (FoSte)tr (which can be used to distinguish between the conduction stage and convection stage) as well as the correlations of liquid fraction (α) and Nusselt number (Nu) for the conduction and convection stages, respectively, are proposed. These correlations, with a wide application range of Rayleigh and Stefan numbers, agree well with the experimental and theoretical results from both present study and open literature, and can well predict the two-stage heat transfer characteristics of constrained melting in a horizontal cylinder.

Validation of a Melting Fraction-Based Effective Thermal Conductivity Correlation for Prediction of Melting Phase Change Inside a Sphere

Experimental and Computational Study of Constrained Melting of Phase Change Materials (pcm) Inside A Spherical Capsule

Numerical Analysis of Heat Transfer Behaviours of Melting Process for Ice Thermal Storage Based on Various Heat Source Configurations

Heat Transfer During Constrained Melting of Nano-Enhanced Phase Change Materials in A Spherical Capsule: an Experimental Study

Unconstrained melting heat transfer in a spherical container revisited in the presence of nano-enhanced phase change materials (NePCM)

Two-stage Heat Transfer Characteristics of Constrained Melting Inside an Isothermally Heated Horizontal Cylinder

Theoretical study on melting of phase change material by natural convection

Melting Performance Enhancement of Phase Change Material with Magnetic Particles under Rotating Magnetic Field

Numerical Simulation of the Melting of Solid Particles in Thermal Convection with a Modified Immersed Boundary Method

Performance Enhancement of Latent Thermal Energy System under Alternating Magnetic Field

Combined measurement and calibration method for the thermal conductivity of phase change materials

Unconstrained melting of phase change material in cylindrical containers inside hot water tanks: Numerical investigation and effect of aspect ratios

The effective thermal conductivity of multiphase material

A Modified Mixture Theory for One-Dimensional Melting of Pure PCM and PCM/metal Foam Composite: Numerical Analysis and Experiment Validation

An effective thermal conductivity correlation for three high-temperature chloride salts melting in a spherical thermal storage capsule

Assessment and validation of a numerical model for phase change materials heatsink on thermoelectric devices

Effects of Natural and Marangoni Convections on Melting of High-temperature Encapsulated Phase Change Material under the Earth and the Moon Gravities

Pore-scale study on Rayleigh-Bénard convection formed in the melting process of metal foam composite phase change material

An efficient method for modelling thermal energy storage in packed beds of spherically encapsulated phase change material

Pore Scale Investigations on Melting of Phase Change Materials Considering the Interfacial Thermal Resistance

Pore-scale study on Rayleigh-B acute accent enard convection formed in the melting process of metal foam composite phase change material