Abstract:Highly-conductive nanostructures may be dispersed into phase change materials (PCM) to improve their effective thermal conductivity, thus leading to colloidal systems that are referred to as nanostructure-enhanced PCM (NePCM). Results of a theoretical and experimental investigation on freezing of NePCM in comparison to the base PCM are presented. A one-dimensional Stefan model was developed to study the unidirectional freezing of NePCM in a finite slab. Only the thermal energy equation was considered and the presence of static dispersed nanoparticles was modeled using effective media relations. A combination of analytical and integral methods was used to solve this moving boundary problem. The elapsed time to form a given thickness of frozen layer was therefore predicted numerically. A cooled-from-bottom unidirectional freezing experimental setup was designed, constructed, and tested. Thermocouple readings were recorded at several equally spaced locations along the freezing direction in order to monitor the progress of the freezing front. As an example, cyclohexane (C6H12) and copper oxide (CuO) nanoparticles were chosen to prepare the NePCM samples. The effective thermophysical and transport properties of these samples for various particle loadings (0.5/3.8, 1/7.5, and 2/14.7 vol. %/wt. %) were determined using the mixture and Maxwell models. Due to utilization of the Maxwell model for thermal conductivity of both phases, the numerical predictions showed that the freezing time is shortened linearly with increasing particle loading, whereas nonmonotonic expediting was observed experimentally. The maximum expediting was found to be nearly 8.23% for the 0.5 vol. % sample. In the absence of a nanoparticle transport model, the mismatch of the cold plate boundary conditions, lack of accurate thermophysical properties, especially in the solid phase of NePCM samples and precipitation issues with 2 vol. % samples were addressed by improving the experimental setup. Through adopting a copper cold plate, utilizing measured thermal conductivity data for both phases and using 1, 2, and 4 wt. % samples, good agreement between the experimental and numerical results were realized. Specifically, adoption of measured thermal conductivity values for the solid phase in the Stefan model that were originally underestimated proved to be a major cause of harmony between the experiments and predictions. [DOI: 10.1115/1.4006305]

Unconstrained melting heat transfer in a spherical container revisited in the presence of nano-enhanced phase change materials (NePCM)

Heat Transfer During Constrained Melting of Nano-Enhanced Phase Change Materials in A Spherical Capsule: an Experimental Study

Close-contact Melting Heat Transfer on a Heated Horizontal Plate: Revisited in the Presence of Nano-Enhanced Phase Change Materials (Nepcm)

Heat Transfer During Constrained Melting Of Graphite-Based Nanofluids In A Spherical Capsule

An Experimental Investigation of Constrained Melting Heat Transfer of Nano-Enhanced Phase Change Materials in a Horizontal Cylindrical Capsule Using Thermochromic Liquid Crystal Thermography

Experimental and Computational Study of Constrained Melting of Phase Change Materials (pcm) Inside A Spherical Capsule

Experimental Investigation of Heat Storage and Heat Transfer Rates During Melting of Nano-Enhanced Phase Change Materials (nepcm) in a Differentially-Heated Rectangular Cavity

An Experimental Study of Inward Solidification of Nano-Enhanced Phase Change Materials (nepcm) Inside A Spherical Capsule

Unconstrained Melting Heat Transfer of Nano-Enhanced Phase-Change Materials in a Spherical Capsule for Latent Heat Storage: Effects of the Capsule Size

A Theoretical and Experimental Investigation of Unidirectional Freezing of Nanoparticle-Enhanced Phase Change Materials

Heat transfer during melting of graphene-based composite phase change materials heated from below

A Similarity Solution to Unidirectional Solidification of Nano-Enhanced Phase Change Materials (nepcm) Considering the Mushy Region Effect

A volume-shrinkage-based method for quantifying the inward solidification heat transfer of a phase change material filled in spherical capsules

A Novel Indirect Visualization Method for Studying the Melting Heat Transfer of Nano-Enhanced Phase Change Materials Using Thermochromic Liquid Crystal Thermography

An Experimental Investigation of Enhanced Thermal Conductivity and Expedited Unidirectional Freezing of Cyclohexane-Based Nanoparticle Suspensions Utilized As Nano-Enhanced Phase Change Materials (Nepcm)

Numerical Analysis of Heat Transfer Behaviours of Melting Process for Ice Thermal Storage Based on Various Heat Source Configurations

Thermophysical Properties of a Novel Nanoencapsulated Phase Change Material

A comparative study between two-dimensional and three-dimensional simulation results of melting inside a container

Expedited Freezing of Nanoparticle-Enhanced Phase Change Materials (nepcm) Exhibited Through A Simple 1-D Stefan Problem Formulation

A Numerical Investigation Of Constrained Melting Of Nanostructure-Enhanced Phase Change Materials In A Rectangular Cavity Heated From Below

The Impact of Thermosolutal Convection on Melting Dynamics of Nano-enhanced Phase Change Materials (NePCM)