Abstract:An experimental and computational investigation directed at understanding the role of buoyancy-driven convection during constrained melting of phase change materials (PCM) inside a spherical capsule is reported. The computations are based on an iterative, finite-volume numerical procedure that incorporates a single-domain enthalpy formulation for simulation of the phase change phenomenon. A Darcy’s Law-type porous media treatment links the effect of phase change on convection. Paraffin wax n-octadecane was constrained during melting inside a transparent glass sphere through the use of thermocouples installed inside the sphere. The melting phase front and melting fraction of the PCM are analyzed and compared with numerical solution obtained from the CFD code Fluent. Following a short period of symmetric melting due to prominence of diffusion, expedited phase change in the top region of the sphere and a wavy surface at the bottom of the PCM are observed. The computational predictions point to the strong thermal stratification in the upper half of the sphere that results from rising of the molten liquid along the inner surface of the sphere thus displacing the colder fluid. The waviness and excessive melting of the bottom of the PCM is shown to be underestimated by the experimental observation. This discrepancy is linked to the use of a support structure to hold the sphere. Measured temperature data and computational results near the bottom indicate the establishment of an unstable fluid layer that promotes chaotic fluctuations and is responsible for waviness of the bottom of the PCM. On the other hand, the comparison between the measured and computed temperatures in the top half of the sphere show the stable nature of the molten liquid layer. The computational results start to deviate from the thermocouple readings as one moves lower from the top of the sphere. This delay in predicting the melting instant is linked to the thermal stratification within the “constant temperature bath” that encloses the capsule.

Combined measurement and calibration method for the thermal conductivity of phase change materials

Thermal conductivity measurement of phase-change material near melting point based on perturbation method

A volume-shrinkage-based method for quantifying the inward solidification heat transfer of a phase change material filled in spherical capsules

Experimental Investigation of the Comprehensive Heat Transfer Performance of PCMs Filled with CMF in a Heat Storage Device

A Novel Indirect Visualization Method for Studying the Melting Heat Transfer of Nano-Enhanced Phase Change Materials Using Thermochromic Liquid Crystal Thermography

A New Model of Phase Change Process for Thermal Energy Storage

Experimental and Computational Study of Constrained Melting of Phase Change Materials (pcm) Inside A Spherical Capsule

Sensitivity Analysis Of Thermophysical Properties On Pcm Selection Under Steady And Fluctuating Heat Sources: A Comparative Study

Thermophysical Properties of a Novel Nanoencapsulated Phase Change Material

A Novel Method for Determining the Melting Point, Fusion Latent Heat, Specific Heat Capacity and Thermal Conductivity of Phase Change Materials

A simple method, the -history method, of determining the heat of fusion, specific heat and thermal conductivity of phase-change materials

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Melting Performance Enhancement of Phase Change Material with Magnetic Particles under Rotating Magnetic Field

Experimental and numerical investigation of the melting process and heat transfer characteristics of multiple phase change materials

Metrology based on transient heat transfer theory for evaluating phase change materials with differential scanning calorimetry

Calibration of differential scanning calorimeter (DSC) for thermal properties analysis of phase change material

Theoretical study on melting of phase change material by natural convection

Phase equilibria -- thermal conductivity relationship within multicomponent Phase Change Materials from 273 K up to above the melting temperature

Determination on the thermal conductivity and thermal contact resistance of thin composite phase change films as a thermal interfacial material

Pore scale simulation for melting of composite phase change materials considering interfacial thermal resistance

Transient Determination on the Bulk Thermal Conductivity of Sub-Millimeter Thin Films of Composite Phase Change Thermal Interfacial Materials