Abstract:An experimental and computational investigation directed at understanding the role of buoyancy-driven convection during constrained melting of phase change materials (PCM) inside a spherical capsule is reported. The computations are based on an iterative, finite-volume numerical procedure that incorporates a single-domain enthalpy formulation for simulation of the phase change phenomenon. A Darcy’s Law-type porous media treatment links the effect of phase change on convection. Paraffin wax n-octadecane was constrained during melting inside a transparent glass sphere through the use of thermocouples installed inside the sphere. The melting phase front and melting fraction of the PCM are analyzed and compared with numerical solution obtained from the CFD code Fluent. Following a short period of symmetric melting due to prominence of diffusion, expedited phase change in the top region of the sphere and a wavy surface at the bottom of the PCM are observed. The computational predictions point to the strong thermal stratification in the upper half of the sphere that results from rising of the molten liquid along the inner surface of the sphere thus displacing the colder fluid. The waviness and excessive melting of the bottom of the PCM is shown to be underestimated by the experimental observation. This discrepancy is linked to the use of a support structure to hold the sphere. Measured temperature data and computational results near the bottom indicate the establishment of an unstable fluid layer that promotes chaotic fluctuations and is responsible for waviness of the bottom of the PCM. On the other hand, the comparison between the measured and computed temperatures in the top half of the sphere show the stable nature of the molten liquid layer. The computational results start to deviate from the thermocouple readings as one moves lower from the top of the sphere. This delay in predicting the melting instant is linked to the thermal stratification within the “constant temperature bath” that encloses the capsule.

A Modified Mixture Theory for One-Dimensional Melting of Pure PCM and PCM/metal Foam Composite: Numerical Analysis and Experiment Validation

Experimental and Computational Study of Constrained Melting of Phase Change Materials (pcm) Inside A Spherical Capsule

A New Model of Phase Change Process for Thermal Energy Storage

Experimental Investigation of the Comprehensive Heat Transfer Performance of PCMs Filled with CMF in a Heat Storage Device

Local Thermal Nonequilibrium During Melting of a Paraffin Filled in an Open-Cell Copper Foam: A Visualized Study at the Pore-Scale

Heat Transfer During Constrained Melting of Nano-Enhanced Phase Change Materials in A Spherical Capsule: an Experimental Study

Melting of Phase Change Materials with Volume Change in Metal Foams

Pore-scale study on Rayleigh-Bénard convection formed in the melting process of metal foam composite phase change material

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Melting Performance Enhancement of Phase Change Material with Magnetic Particles under Rotating Magnetic Field

Dual-sided melting of a one-dimensional composite wall comprising two distinct phase change material (PCM) layers

Theoretical study on melting of phase change material by natural convection

Effect of filling configurations on melting heat transfer characteristic of phase change materials partially filled with metal foam

A novel model for calculating the melting process of composite phase change materials

Numerical study of heat transfer characteristics of phase change materials reinforced with porous media based on hybrid mesh

Experimental and numerical investigation of the melting process and heat transfer characteristics of multiple phase change materials

Macroscale Modeling of Solid–Liquid Phase Change in Metal Foam/Paraffin Composite: Effects of Paraffin Density Treatment, Thermal Dispersion, and Interstitial Heat Transfer

A solid–liquid model based on lattice Boltzmann method for phase change material melting with porous media in cylindrical heat exchangers

A monolithic model of solid–liquid phase change problem

Numerical study on melting and heat transfer characteristics of vertical cylindrical PCM with a focus on the solid-liquid interface heat transfer rate

Experimental and simulation study on the heat transfer mechanism and heat storage performance of copper metal foam composite paraffin wax during melting process