Abstract:Highly-conductive nanostructures may be dispersed into phase change materials (PCM) to improve their effective thermal conductivity, thus leading to colloidal systems that are referred to as nanostructure-enhanced PCM (NePCM). Results of a theoretical and experimental investigation on freezing of NePCM in comparison to the base PCM are presented. A one-dimensional Stefan model was developed to study the unidirectional freezing of NePCM in a finite slab. Only the thermal energy equation was considered and the presence of static dispersed nanoparticles was modeled using effective media relations. A combination of analytical and integral methods was used to solve this moving boundary problem. The elapsed time to form a given thickness of frozen layer was therefore predicted numerically. A cooled-from-bottom unidirectional freezing experimental setup was designed, constructed, and tested. Thermocouple readings were recorded at several equally spaced locations along the freezing direction in order to monitor the progress of the freezing front. As an example, cyclohexane (C6H12) and copper oxide (CuO) nanoparticles were chosen to prepare the NePCM samples. The effective thermophysical and transport properties of these samples for various particle loadings (0.5/3.8, 1/7.5, and 2/14.7 vol. %/wt. %) were determined using the mixture and Maxwell models. Due to utilization of the Maxwell model for thermal conductivity of both phases, the numerical predictions showed that the freezing time is shortened linearly with increasing particle loading, whereas nonmonotonic expediting was observed experimentally. The maximum expediting was found to be nearly 8.23% for the 0.5 vol. % sample. In the absence of a nanoparticle transport model, the mismatch of the cold plate boundary conditions, lack of accurate thermophysical properties, especially in the solid phase of NePCM samples and precipitation issues with 2 vol. % samples were addressed by improving the experimental setup. Through adopting a copper cold plate, utilizing measured thermal conductivity data for both phases and using 1, 2, and 4 wt. % samples, good agreement between the experimental and numerical results were realized. Specifically, adoption of measured thermal conductivity values for the solid phase in the Stefan model that were originally underestimated proved to be a major cause of harmony between the experiments and predictions. [DOI: 10.1115/1.4006305]

Dual-sided melting of a one-dimensional composite wall comprising two distinct phase change material (PCM) layers

Analytical modeling of phase change in a composite wall comprising two distinct phase change materials in series

Experimental and Computational Study of Constrained Melting of Phase Change Materials (pcm) Inside A Spherical Capsule

A New Model of Phase Change Process for Thermal Energy Storage

Heat transfer during melting of graphene-based composite phase change materials heated from below

An Experimental Investigation of Constrained Melting Heat Transfer of Nano-Enhanced Phase Change Materials in a Horizontal Cylindrical Capsule Using Thermochromic Liquid Crystal Thermography

A Novel Indirect Visualization Method for Studying the Melting Heat Transfer of Nano-Enhanced Phase Change Materials Using Thermochromic Liquid Crystal Thermography

A Theoretical and Experimental Investigation of Unidirectional Freezing of Nanoparticle-Enhanced Phase Change Materials

Experimental and numerical investigation of the melting process and heat transfer characteristics of multiple phase change materials

A Modified Mixture Theory for One-Dimensional Melting of Pure PCM and PCM/metal Foam Composite: Numerical Analysis and Experiment Validation

Melting Performance Enhancement of Phase Change Material with Magnetic Particles under Rotating Magnetic Field

Study of melting behavior of phase change material in a square enclosure with constant and variable heat flux at different wall heating conditions: A numerical approach

A monolithic model of solid–liquid phase change problem

Melting of Phase Change Materials with Volume Change in Metal Foams

Theoretical study on melting of phase change material by natural convection

Dynamics of PCM Melting Driven by Spatially Varying Heat Load

Experimental Investigation on the Characteristics of Melting Process of Phase Change Material in Horizontal Annulus

Unconstrained melting of phase change material in cylindrical containers inside hot water tanks: Numerical investigation and effect of aspect ratios

A low Mach enthalpy method to model non-isothermal gas-liquid-solid flows with melting and solidification

Heat transfer and fluid flow in a PCM-filled enclosure: Effect of heated wall configuration

Temperature Control in (Translucent) Phase Change Materials Applied in Facades: A Numerical Study