Shashlik-like Te–Bi2Te3hetero-nanostructures: One-Pot Synthesis, Growth Mechanism and Their Thermoelectric Properties

Zhi-Yuan Mei,Jun Guo,Yi Wu,Jing Feng,Zhen-Hua Ge

DOI: https://doi.org/10.1039/c9ce00441f

IF: 3.756

2019-01-01

CrystEngComm

Abstract:Shashlik-like Te–Bi2Te3nanocomposites (consisting of Te nanorods and Bi2Te3nanoplates) were successfully synthesizedviaa solvothermal method.

What problem does this paper attempt to address?

Shashlik-like Te–Bi<sub>2</sub>Te<sub>3</sub> hetero-nanostructures: one-pot synthesis, growth mechanism and their thermoelectric properties

Zhi-Yuan Mei,Jun Guo,Yi Wu,Jing Feng,Zhen-Hua Ge

DOI: https://doi.org/10.1039/c9ce00441f

IF: 3.756

2019-01-01

CrystEngComm

Abstract:Shashlik-like Te–Bi2Te3 nanocomposites (consisting of Te nanorods and Bi2Te3 nanoplates) were successfully synthesized via a solvothermal method.
Synthesis and Thermoelectric Properties of Bi2te3 Based Nanocomposites

HL Ni,XB Zhao,TJ Zhu,XH Ji,JP Tu

DOI: https://doi.org/10.1016/j.jallcom.2005.01.046

IF: 6.2

2005-01-01

Journal of Alloys and Compounds

Abstract:Nanocrystalline binary Bi2Te3 powders were synthesized by a hydrothermal method from BiCl3 and pure tellurium at different temperature. XRD analysis and TEM observation showed that the average grain sizes increase from 15 to 35nm with the increase of the synthesis temperature from 120 to 250°C. Novel Bi2Te3 based nanocomposites were prepared by hot pressing from 90wt.% zone-melted alloys and 10wt.% hydrothermally synthesized nanopowders. It was found that the nanosized powders are effective to reduce the thermal conductivity stronger than the electrical conductivity, a result that improves the figure of merit of a nanocomposite. A maximal ZT value of 0.83 has been obtained. Further improvement on the figure of merit of the nanocomposites are considered to be possible by doping the nanopowders and optimizing the composition of the base alloys.
Surfactant-free Synthesis of Bi2Te3-Te Micro-Nano Heterostructure with Enhanced Thermoelectric Figure of Merit.

Yichi Zhang,Heng Wang,Stephan Kraeemer,Yifeng Shi,Fan Zhang,Matt Snedaker,Kunlun Ding,Martin Moskovits,G. Jeffrey Snyder,Galen D. Stuck

DOI: https://doi.org/10.1021/nn2002294

IF: 17.1

2011-01-01

ACS Nano

Abstract:An ideal thermoelectric material would be a semiconductor with high electrical conductivity and relatively low thermal conductivity: an "electron crystal, phonon glass". Introducing nanoscale heterostructures into the bulk TE matrix is one way of achieving this intuitively anomalous electron/phonon transport behavior. The heterostructured interfaces are expected to play a significant role in phonon scattering to reduce thermal conductivity and in the energy-dependent scattering of electrical carriers to improve the Seebeck coefficient. A nanoparticle building block assembly approach is plausible to fabricate three-dimensional heterostructured materials on a bulk commercial scale. However, a key problem in applying this strategy is the possible negative impact on TE performance of organic residue from the nanoparticle capping ligands. Herein, we report a wet chemical, surfactant-free, low-temperature, and easily up-scalable strategy for the synthesis of nanoscale heterophase Bi(2)Te(3)-Te via a galvanic replacement reaction. The micro-nano heterostructured material is fabricated bottom-up, by mixing the heterophase with commercial Bi(2)Te(3). This unique structure shows an enhanced zT value of ∼0.4 at room temperature. This heterostructure has one of the highest figures of merit among bismuth telluride systems yet achieved by a wet chemical bottom-up assembly. In addition, it shows a 40% enhancement of the figure of merit over our lab-made material without nanoscale heterostructures. This enhancement is mainly due to the decrease in the thermal conductivity while maintaining the power factor. Overall, this cost-efficient and room-temperature synthesis methodology provides the potential for further improvement and large-scale thermoelectric applications.
Novel thermoelectric Bi2Te3 nanotubes and nanocapsules prepared by hydrothermal synthesis

X. H. Ji,X. B. Zhao,Y. H. Zhang,T. Sun,H. L. Ni,B. H. Lu

2004-01-01

Abstract:Bi2Te3 nano-powders have been prepared via hydrothermal synthesis in closed and opened systems respectively by using Te powder and BiCl3 as the reactants and NaBH4 as the reductant. The morphology and microstructure investigations of the products show that novel quasi-one-dimensional Bi2Te3 nanotubes and nanocapsules with an average diameter of about 100nm have formed during the reactions. The nanotubes-contained powder was used as the additive of hotpressed Bi2Te3 based alloys. Thermoelectric transport measurements show that the thermoelectric properties of the nano-composite bulk materials are remarkably increased. The maximum figure of merit ZT above 1.2 was achieved.
Development of Nanostructured Bi2Te3 with High Thermoelectric Performance by Scalable Synthesis and Microstructure Manipulations

Chhatrasal Gayner,Luke T Menezes,Yuriy Natanzon,Yaron Kauffmann,Holger Kleinke,Yaron Amouyal

DOI: https://doi.org/10.1021/acsami.2c21561

2023-03-15

Abstract:Nanostructuring of thermoelectric (TE) materials leads to improved energy conversion performance; however, it requires a perfect fit between the nanoprecipitates' chemistry and crystal structure and those of the matrix. We synthesize bulk Bi2Te3 from molecular precursors and characterize their structure and chemistry using electron microscopy and analyze their TE transport properties in the range of 300-500 K. We find that synthesis from Bi2O3 + Na2TeO3 precursors results in n-type Bi2Te3 containing a high number density (Nv ∼ 2.45 × 1023 m-3) of Te-nanoprecipitates decorating the Bi2Te3 grain boundaries (GBs), which yield enhanced TE performance with a power factor (PF) of ∼19 μW cm-1 K-2 at 300 K. First-principles calculations validate the role of Te/Bi2Te3 interfaces in increasing the charge carrier concentration, density of states, and electrical conductivity. These optimized TE coefficients yield a promising TE figure of merit (zT) peak value of 1.30 at 450 K and an average zT of 1.14 from 300 to 500 K. This is one of the cutting-edge zT values recorded for n-type Bi2Te3 produced by chemical routes. We believe that this chemical synthesis strategy will be beneficial for future development of scalable n-type Bi2Te3 based devices.
A New Strategy for Realizing the Conversion of "Homo-Hetero-homo" Heteroepitaxial Growth in Bi(2)Te(3) and the Thermoelectric Performance.

Wei Guo,Jianmin Ma,Jiaqin Yang,Di Li,Qing Qin,Caiying Wei,Wenjun Zheng

DOI: https://doi.org/10.1002/chem.201304436

2014-01-01

Chemistry - A European Journal

Abstract:Uncovering the reason for structure-dependent thermoelectric performance still remains a big challenge. A low-temperature and easily scalable strategy for synthesizing Bi2 Te3 nanostring hierarchical structures through solution-phase reactions, during which there is the conversion of "homo-hetero-homo" in Bi2 Te3 heteroepitaxial growth, is reported. Bi2 Te3 nanostrings are obtained through the transformation from pure Bi2 Te3 hexagonal nanosheets followed by TeBi2 Te3 "nanotop" heterostructures to Bi2 Te3 nanostrings. The growth of Bi2 Te3 nanostrings appears to be a self-assembly process through a wavy competition process generated from Te and Bi(3+) . The conversion of homo-hetero-homo opens up new platforms to investigate the wet chemistry of Bi2 Te3 nanomaterials. Furthermore, to study the effect of morphologies and hetero/homo structures, especially with the same origin and uniform conditions on their thermoelectric properties, the thermoelectric properties of Bi2 Te3 nanostrings and TeBi2 Te3 heterostructured pellets fabricated by spark plasma sintering have been investigated separately.
Realizing the Interface Tuned Thermoelectric Transport Performance in Bi2Te3-Based Hierarchical Nanostructures

Shuai Liu,Hanxiao Li,Wenjing Hang,Jun Sun,Guanjun Chen,Jie Chen,Xu Yang,Guoxiang Chen,Fei Ma

DOI: https://doi.org/10.1021/acs.jpcc.9b05530

2019-01-01

The Journal of Physical Chemistry C

Abstract:Hierarchical Te/Bi2Te3 and Bi2Te3 nanostructures are synthesized by using a one-pot solvothermal method and sintered into pellets by spark plasma sintering (SPS), individually. The thermoelectric properties measurement indicates the electrons/phonon transport is directly influenced by interface state of the hierarchical nanostructures. As compared to Te/Bi2Te3 heterostructures, the higher energy barrier at the interface of homostructured Bi2Te3 (71 meV) leads to the energy filtering effect on the electronic transport and the optimized power factor in the Bi2Te3 pellet. The thermal conductivity is remarkably reduced because of the strong scattering between phonons and high-density defects in both samples. As a result, an enhanced ZT value (0.58) of the Bi2Te3 nanowires was obtained at 353 K. Importantly, the average ZT (0.56), which is comparable to the peak ZT of both samples, is dramatically improved in these hierarchical nanostructures in the temperature range of 313-433 K.
Bi2Te3 Nanoplates and Nanoflowers: Synthesized by Hydrothermal Process and Their Enhanced Thermoelectric Properties

Jipeng Fu,Shuyan Song,Xiaoguang Zhang,Feng Cao,Liang Zhou,Xiyan Li,Hongjie Zhang

DOI: https://doi.org/10.1039/c2ce06348d

IF: 3.756

2012-01-01

CrystEngComm

Abstract:Bi2Te3 nanoplates with a thickness of 15-20 nm and self-assembled flower-like nanostructures using previous nanoplates as building blocks have been fabricated through a low-cost hydrothermal method with ethylenediamine tetraacetic acid (EDTA) as an additive. The structures and morphologies of the samples were characterized via X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectrometry (FT-IR) and transmission electron microscope (TEM) measurements. The growth mechanisms have been proposed based on the experimental results. The nanoplates and flower-like Bi2Te3 nanocrystals (NCs) with no residual additives were consolidated by high pressure to an n-type nanostructured bulk material with preserved crystal grain sizes. Moreover, self-assembly NCs show higher thermoelectric properties than the nanoplates. The power factors and thermoelectric figure of merit (ZT) of chemically synthesized flowerlike Bi2Te3 NCs were improved up to 8.6 mu W cm(-1) K-2 and 0.7, respectively, which possess the potential to design new materials and devices for thermoelectric applications.
Solvothermal synthesis of nanostructured Bi_2Te_3 based thermoelectric materials

ZHAO Xinbing,CAO Yiqi,ZHU Tiejun

2006-01-01

Abstract:The recent development on the solvothermal synthesis of nanostructured bismuth tellurides has been reviewed. The chemical reactions and crystal growth during solvothermal synthesis, especially the synthesis, formation and structural features of bismuth telluride nanotubes, have been discussed. The bismuth telluride based coessential nanostructured composite, in which the nanopowders have the similar chemical composition as the matrix alloy, reaches a high figure of merit of ZT≈1.25, which not only is much higher than that of the matrix material but also higher than that of the state-of-the-art bulk bismuth telluride based thermoelectric materials.
Syntheses and Thermoelectric Properties of Bi2te3/Sb2te3 Bulk Nanocomposites with Laminated Nanostructure

Y. Q. Cao,X. B. Zhao,T. J. Zhu,X. B. Zhang,J. P. Tu

DOI: https://doi.org/10.1063/1.2900960

IF: 4

2008-01-01

Applied Physics Letters

Abstract:Nanocomposites with constituent sizes of <50nm are considered as a promising approach to enhance the figure of merit of bulk thermoelectric materials. A simple route involving hydrothermal synthesis and hot pressing was used in this work to prepare Bi2Te3∕Sb2Te3 bulk nanocomposites. It is shown that the composites have a laminated structure composed of Bi2Te3 and Sb2Te3 nanolayers with the thickness varying alternately between 5 and 50nm. The transport measurements indicate that the nanoscale laminated structure improves the thermoelectric performance with the maximal dimensionless figure of merit of 1.47 for the nanocomposite hot pressed from Bi2Te3 and Sb2Te3 nanopowders.
High-pressure synthesis and excellent thermoelectric performance of Ni/BiTeSe magnetic nanocomposites

Shifang Ma,Cuncheng Li,Ping Wei,Wanting Zhu,Xiaolei Nie,Xiahan Sang,Qingjie Zhang,Wenyu Zhao

DOI: https://doi.org/10.1039/c9ta13284h

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:Superparamagnetic Ni nanoparticles remarkably enhance the room-temperature thermoelectric and cooling performance of n-type BiTeSe alloys.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Nanostructures for thermoelectric applications: synthesis, growth mechanism, and property studies.

Genqiang Zhang,Qingxuan Yu,Wei Wang,Xiaoguang Li

DOI: https://doi.org/10.1002/adma.200903812

IF: 29.4

2010-01-01

Advanced Materials

Abstract:Both heterostructures and hollow nanostructures have been predicted as candidates with excellent thermoelectric performance. In this Research News areticle, recent advances with regard to synthetic strategies, growth mechanisms, and thermoelectric properties of one-dimensional heterostructures (segmented and core/shell) and tubular nanostructures are reported. The thermoelectric property studies of Te/Bi core/shell heterostructured nanowires and Bi2Te3 nanotubes indicate that the Seebeck coefficient and thermal conductivity of these materials can be optimized to improve their thermoelectric performance. In addition, the current issues and future research directions for promising thermoelectric nanostructures will be discussed on the basis of these experimental results.
Synthesis of Multishell Nanoplates by Consecutive Epitaxial Growth of Bi2Se3 and Bi2Te3 Nanoplates and Enhanced Thermoelectric Properties

Yuho Min,Gyeongbae Park,Bongsoo Kim,Anupam Giri,Jie Zeng,Jong Wook Roh,Sang Il Kim,Kyu Hyoung Lee,Unyong Jeong

DOI: https://doi.org/10.1021/nn507250r

IF: 17.1

2015-01-01

ACS Nano

Abstract:We herein demonstrate the successive epitaxial growth of Bi2Te3 and Bi2Se3 on seed nanoplates for the scalable synthesis of heterostructured nanoplates (Bi2Se3@Bi2Te3) and multishell nanoplates (Bi2Se3@Bi2Te3@Bi2Se3, Bi2Se3@Bi2Te3@Bi2Se3@Bi2Te3). The relative dimensions of the constituting layers are controllable via the molar ratios of the precursors added to the seed nanoplate solution. Reduction of the precursors produces nanoparticles that attach preferentially to the sides of the seed nanoplates. Once attached, the nanoparticles reorganize epitaxially on the seed crystal lattices to form single-crystalline core-shell nanoplates. The nanoplates, initially 100 nm wide, grew laterally to 620 nm in the multishell structure, while their thickness increased more moderately, from 5 to 20 nm. The nanoplates were pelletized into bulk samples by spark plasma sintering and their thermoelectric properties are compared. A peak thermoelectric figure of merit (ZT) ∼0.71 was obtained at 450 K for the bulk of Bi2Se3@Bi2Te3 nanoplates by simultaneous modulation of electronic and thermal transport in the presence of highly dense grain and phase boundaries.
Flower-like nanostructure and thermoelectric properties of hydrothermally synthesized La-containing Bi2Te3 based alloys

Y.H. Zhang,T.J. Zhu,J.P. Tu,X.B. Zhao

DOI: https://doi.org/10.1016/j.matchemphys.2007.02.059

IF: 4.778

2007-01-01

Materials Chemistry and Physics

Abstract:Single-phase La-containing Bi2Te3 based nanopowders have been synthesized via a hydrothermal route using BiCl3, LaCl3, selenium and tellurium powders as the reactants, NaBH4 as the reductant, NaOH as the pH-value controller and ethylenediaminetetraacetic disodium salt (EDTA) as the additive. The synthesized powders have a flower-like morphology assembled by the side-by-side arrangement of the nano-sheets. Rietveld refinement analyses of crystal structure indicated that the alloyed lanthanum substituted bismuth at the 6c lattice position of Bi2Te3 based compounds. The thermoelectric property measurements of the hot-pressed samples showed that the substituting lanthanum in the Bi2Te3 based compounds was an n-type dopant. A ZT value of about 0.58 has been obtained for the La0.2Bi1.8Te3 alloy at 480K.
Design Principle of Telluride-Based Nanowire Heterostructures for Potential Thermoelectric Applications

Genqiang Zhang,Haiyu Fang,Haoran Yang,Luis A. Jauregui,Yong P. Chen,Yue Wu

DOI: https://doi.org/10.1021/nl301327d

IF: 10.8

2012-06-27

Nano Letters

Abstract:We present a design principle to develop new categories of telluride-based thermoelectric nanowire heterostructures through rational solution-phase reactions. The catalyst-free synthesis yields Te-Bi(2)Te(3) "barbell" nanowire heterostructures with a narrow diameter and length distribution as well as a rough control over the density of the hexagonal Bi(2)Te(3) plates on the Te nanowire bodies, which can be further converted to other telluride-based compositional-modulated nanowire heterostructures such as PbTe-Bi(2)Te(3). Initial characterizations of the hot-pressed nanostructured bulk pellets of the Te-Bi(2)Te(3) heterostructure show a largely enhanced Seebeck coefficient and greatly reduced thermal conductivity, which lead to an improved thermoelectric figure of merit. This approach opens up new platforms to investigate the phonon scattering and energy filtering.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Controlled growth of bismuth antimony telluride Bi x Sb 2−x Te 3 nanoplatelets and their bulk thermoelectric nanocomposites

chaohua zhang,zeping peng,zhong li,ligen yu,k a khor,qihua xiong

DOI: https://doi.org/10.1016/j.nanoen.2015.05.022

IF: 17.6

2015-01-01

Nano Energy

Abstract:Solution synthesis as a scalable bottom-up growth method shows considerable advantages for designing novel nanostructured bulk composites with augmented thermoelectric performance. Tuning the composition of synthesized materials in the solution process is important for adjusting the carrier type and concentration. Here, we report a modified solvothermal synthesis method for the controlled growth of BixSb2−xTe3 nanoplatelets, which can be sintered into nanostructured bulk pellets by using the spark plasma sintering process. We further demonstrate the tuning of the stoichiometric composition in ternary BixSb2−xTe3 nanoplatelets with high crystallinity and homogenous phase purity, which is proved by X-ray diffraction and Raman spectroscopy. The composition dependence of the thermoelectric performance of p-type BixSb2−xTe3 pellets is also systemically studied. The optimized nanostructured bulk Bi0.5Sb1.5Te3 sample is found to have ZT ~0.51 at 375K, which shows great potential for further improving the thermoelectric performance by this solution synthesis method. Considering the progress in n-type Bi–Te–Se composites, our results advocate the promise of bismuth/antimony chalcogenide nanocomposites towards practical thermoelectric applications.
Realizing high thermoelectric performance in Te nanocomposite through Sb2Te3 incorporation

Heng Quan Yang,Yong Jin Chen,Xiao Yang Wang,Lei Miao,Xiao Yan Li,Xiao Dong Han,Xu Lu,Guo Yu Wang,Xiao Yuan Zhou

DOI: https://doi.org/10.1039/c8ce01539b

IF: 3.756

2018-01-01

CrystEngComm

Abstract:The rational design and fabrication of nanostructures has become a fashionable strategy for pursing high thermoelectric performance in solid-state materials. Here we report nanostructured Te-Sb2Te3 composites with significantly enhanced thermoelectric performance through a scalable bottom-up method followed by a rapid sintering process. The power factor along with the carrier concentration could be significantly enhanced by increasing the number of point defects of Sb'(Te). Meanwhile, a great number of boundaries and hetero-interfaces between the Te and Sb2Te3 nanoparticles could play an important role in blocking phonons, resulting in the evident suppression of lattice thermal conductivity. Ultimately, a highest zT value close to 1.0 could be achieved at 623 K in samples with components of 2.6 mol% Sb2Te3 and 97.4 mol% Te. Such a peak zT value is comparable to that of doped Te materials synthesized by the conventional solid-state reaction process. This work reveals that high thermoelectric performance could be realized in an intentionally designed nanocomposite by synergistically improving the power factor and suppressing the lattice thermal conductivity.
Electrodeposition of Thermoelectric Superlattice Nanowires

Bongyoung Yoo,Feng Xiao,Krassimir N. Bozhilov,Jennifer Herman,Margaret A. Ryan,Nosang V. Myung

DOI: https://doi.org/10.1002/adma.200600606

2006-01-01

Abstract:Bi2Te3/(Bi0.3Sb0.7)(2)Te-3 superlattice thermoelectric nanowires are synthesized by using a template-directed electrodeposition method. Adjustment of the deposition times and potentials enables precise control over the composition and length of each segment of the nanowires. Characterization of the superlattice nanowires by, amongst others, energy dispersive X-ray analysis (see figure) reveals their periodically varying structure.
Synthesis and thermoelectric characterization of Bi2Te3 nanoparticles

Marcus Scheele,Niels Oeschler,Katrin Meier,Andreas Kornowski,Christian Klinke,Horst Weller

DOI: https://doi.org/10.48550/arXiv.1003.0621

2010-03-02

Materials Science

Abstract:We report a novel synthesis for near monodisperse, sub-10-nm Bi2Te3 nanoparticles. At first, a new reduction route to bismuth nanoparticles is described which are applied as starting materials in the formation of rhombohedral Bi2Te3 nanoparticles. After ligand removal by a novel hydrazine hydrate etching procedure, the nanoparticle powder is spark plasma sintered to a pellet with preserved crystal grain sizes. Unlike previous works on the properties of Bi2Te3 nanoparticles, the full thermoelectric characterization of such sintered pellets shows a highly reduced thermal conductivity and the same electric conductivity as bulk n-type Bi2Te3.
Sonochemical Synthesis of Nanocrystalline Bi2Te3 Thermoelectric Compounds

YY Zheng,TJ Zhu,XB Zhao,JP Tu,GS Cao

DOI: https://doi.org/10.1016/j.matlet.2005.04.035

IF: 3

2005-01-01

Materials Letters

Abstract:Nanocrystalline Bi2Te3 thermoelectric compounds have been synthesized by sonochemical methods at 70 °C using Te and BiCl3 as the reactants, NaBH4 as the reductant and NaOH as the pH-value controller. The samples were characterized by X-ray diffraction and transmission electron microscopy. It is found that the addition of EDTA chelator can suppress the formation of the Bi2Te3 phase. The prepared powders consist of granular and flake nano-particles. The size of the particles are very fine arising from ultrasound effect, about 10∼20 nm. The possible formation mechanism of Bi2Te3 is proposed.

Shashlik-like Te–Bi2Te3hetero-nanostructures: One-Pot Synthesis, Growth Mechanism and Their Thermoelectric Properties

Shashlik-like Te–Bi<sub>2</sub>Te<sub>3</sub> hetero-nanostructures: one-pot synthesis, growth mechanism and their thermoelectric properties

Synthesis and Thermoelectric Properties of Bi2te3 Based Nanocomposites

Surfactant-free Synthesis of Bi2Te3-Te Micro-Nano Heterostructure with Enhanced Thermoelectric Figure of Merit.

Novel thermoelectric Bi2Te3 nanotubes and nanocapsules prepared by hydrothermal synthesis

Development of Nanostructured Bi2Te3 with High Thermoelectric Performance by Scalable Synthesis and Microstructure Manipulations

A New Strategy for Realizing the Conversion of "Homo-Hetero-homo" Heteroepitaxial Growth in Bi(2)Te(3) and the Thermoelectric Performance.

Realizing the Interface Tuned Thermoelectric Transport Performance in Bi2Te3-Based Hierarchical Nanostructures

Bi2Te3 Nanoplates and Nanoflowers: Synthesized by Hydrothermal Process and Their Enhanced Thermoelectric Properties

Solvothermal synthesis of nanostructured Bi_2Te_3 based thermoelectric materials

Syntheses and Thermoelectric Properties of Bi2te3/Sb2te3 Bulk Nanocomposites with Laminated Nanostructure

High-pressure synthesis and excellent thermoelectric performance of Ni/BiTeSe magnetic nanocomposites

Nanostructures for thermoelectric applications: synthesis, growth mechanism, and property studies.

Synthesis of Multishell Nanoplates by Consecutive Epitaxial Growth of Bi2Se3 and Bi2Te3 Nanoplates and Enhanced Thermoelectric Properties

Flower-like nanostructure and thermoelectric properties of hydrothermally synthesized La-containing Bi2Te3 based alloys

Design Principle of Telluride-Based Nanowire Heterostructures for Potential Thermoelectric Applications

Controlled growth of bismuth antimony telluride Bi x Sb 2−x Te 3 nanoplatelets and their bulk thermoelectric nanocomposites

Realizing high thermoelectric performance in Te nanocomposite through Sb2Te3 incorporation

Electrodeposition of Thermoelectric Superlattice Nanowires

Synthesis and thermoelectric characterization of Bi2Te3 nanoparticles

Sonochemical Synthesis of Nanocrystalline Bi2Te3 Thermoelectric Compounds