Abstract:Thermoelectric materials convert heat energy into electricity, hold promising capabilities for energy waste harvesting, and may be the future of sustainable energy utilization. In this work, we successfully synthesized core-shell Bi2Te3/Sb2Te3 (BTST) nanostructured heterojunctions via a two-step solution route. Samples with different Bi2Te3 core to Sb2Te3 shell ratios could be synthesized by controlling the reaction precursors. Scanning electron microscopy images show well-defined hexagonal nanoplates and the distinct interfaces between Bi2Te3 and Sb2Te3. The similarity of the area ratios with the precursor ratios indicates that the growth of the Sb2Te3 shell mostly took place on the lateral direction rather than the vertical. Transmission electron microscopy revealed the crystalline nature of the as-synthesized Bi2Te3 core and Sb2Te3 shell. Energy-dispersive X-ray spectroscopy verified the lateral growth of a Sb2Te3 shell on the Bi2Te3 core. Thermoelectric properties were measured on pellets obtained from powders via spark plasma sintering with two different directions, in-plane and out-of-plane, showing anisotropic properties due to the nanostructure alignment in the pellets. All samples showed a degenerate semiconducting character with the electrical resistivity increasing with the temperature. Starting from Sb2Te3, the electrical resistivity increases with the increase in amounts of Bi2Te3. Thermal conductivity is lowered due to the increase in interfaces and additional phonon scattering. We show that the out-of-plane direction of the BTST 1-3 sample (where 1-3 indicates the ratio of BT to ST) demonstrates a high Seebeck value of 145 μV/K at 500 K which may be attributed to an energy filtering effect across the heterojunction interfaces. The highest overall zT is observed for the BTST 1-3 sample in the out-of-plane direction at 500 K. The zT values increase continuously over the measured temperature range, indicating a probable higher value at increased temperatures.

Realizing the Interface Tuned Thermoelectric Transport Performance in Bi2Te3-Based Hierarchical Nanostructures

Realizing high thermoelectric performance in Te nanocomposite through Sb2Te3 incorporation

Development of Nanostructured Bi2Te3 with High Thermoelectric Performance by Scalable Synthesis and Microstructure Manipulations

Optimized Hetero-Interfaces by Tuning 2d Sns2 Thickness in Bi2te2.7se0.3/Sns2 Nanocomposites to Enhance Thermoelectric Performance

Nanostructuring and improved performance of ternary Bi–Sb–Te thermoelectric materials

Enhancing the Thermoelectric Property of Bi2Te3 Through a Facile Design of Interfacial Phonon Scattering

Hierarchical Low-Temperature n-Type Bi2Te3 with High Thermoelectric Performances

Multi-scale hierarchical microstructure modulation towards high room temperature thermoelectric performance in <i>n</i>-type Bi<sub>2</sub>Te<sub>3</sub>-based alloys

Thermoelectric performance of p-type (Bi,Sb)2Te3 incorporating amorphous Sb2S3 nanospheres

Realizing High Thermoelectric Performance in Bi 0.4 Sb 1.6 Te 3 Nanosheets by Doping Sn Element

Study of the Thermoelectric Properties of Bi2Te3/Sb2Te3 Core-Shell Heterojunction Nanostructures

Great Enhancements in the Thermoelectric Power Factor of BiSbTe Nanostructured Films with Well-Ordered Interfaces

Surfactant-free Synthesis of Bi2Te3-Te Micro-Nano Heterostructure with Enhanced Thermoelectric Figure of Merit.

Enhanced Thermoelectric Properties of p-Type Bi 0.48 Sb 1.52 Te 3 /Sb 2 Te 3 Composite

Enhanced Thermoelectric Performance of SnTe-Based Materials via Interface Engineering

2D hetero-nanosheets to enable ultralow thermal conductivity by all scale phonon scattering for highly thermoelectric performance

Tunable Electrical Conductivity and Simultaneously Enhanced Thermoelectric and Mechanical Properties in n‐type Bi2Te3

Synergistical Enhancement of Thermoelectric Properties in N‐type Bi2O2Se by Carrier Engineering and Hierarchical Microstructure

Tunable Electrical Conductivity and Simultaneously Enhanced Thermoelectric and Mechanical Properties in n-type Bi<sub>2</sub>Te<sub>3</sub>

Enhanced thermoelectric performance of Bi0.3Sb1.7Te3 based alloys by dispersing TiC ceramic nanoparticles

High performance of Mg3Bi1.5Sb0.5 based materials for power generation: Revealing the counter-intuitive effect of tuning Bi content on the thermoelectric properties