Abstract:Silicon-based optoelectronics, using the mature silicon-based microelectronic complementary metal oxide semiconductor (CMOS) manufacturing process, is a large-scale optoelectronic integration platform that has attracted much attention. Surface plasmonic devices have also received extensive attention in the past decades, and especially the silicon-based surface plasmonic nanofocusing devices have become a research hotspot. Typical nanofocusing structures include chirped surface gratings, plasmonic Fresnel zone plate, nano-slit array, tapered metal tips. However, there occur some inevitable problems in these devices, such as the fine structure being too complex to be fabricated and too large transmission loss of metal slot waveguide. In this work, an ultra-compact hybrid surface plasmon nanofocusing device is designed and fabricated by the silicon-based optoelectronic technology, and the nanofocusing performance of the device is also experimentally verified. The hybrid surface plasmon nanofocusing devices are fabricated on a silicon-on-insulator (SOI) wafer by electron beam lithography (EBL) system. The silicon wire waveguides, tapers and the thin silicon strips in the middle of nanofocusing regions are patterned in only one step EBL. The gold layer is formed by a deposition and lift-off process, and then a partially etching process is introduced to make the thickness of the middle thin silicon strips the same as that of the gold layer. With a 1.23-mu m-long tapered structure, our nanofocusing devices focus the light field of a silicon strip waveguide into a hybrid surface plasmon waveguide, making non-resonant optical field increase 20 times in the 1550 nm near-infrared band experimentally. The entire insertion loss is about 4.6 dB, and the mode area of the nanofocusing area is about (lambda/n)(2) / 6 40 which is over 300 times smaller than that of the input silicon waveguide. When the middle slot silicon waveguide width W-Si = 120 nm, the insertion loss reaches a minimum value of 2.8 dB. In our design, we adopt the design of silicon-based hybrid plasmonic waveguides. In this design, a layer of material with low refractive index is inserted between the metal layer and the silicon layer to act as a "container" of light field, which makes this silicon-based hybrid plasmonic waveguides have less loss than the traditional metal plasmonic waveguides, and can still maintain high optical field localization. Such silicon-based hybrid surface plasmon nanofocusing devices with simple structures and excellent performances are promising alternatives for future applications in optical field manipulation, optical sensing, nonlinear optical devices, and optical phase-change storage.

Cost-effective mid-infrared micropolarizer fabricated on common silicon by soft nanoimprint lithography.

Design and Fabrication of a TE-pass Polarizer Based on Silicon Nitride Optical Waveguide

High Transparent Mid-Infrared Silicon "window" Decorated with Amorphous Photonic Structures Fabricated by Facile Phase Separation

Si-Cmos Compatible Materials and Devices for Mid-Ir Microphotonics

Large-area flexible infrared nanowire grid polarizer fabricated using nanoimprint lithography.

Simple Fabrication of Closed-Packed IR Microlens Arrays on Silicon by Femtosecond Laser Wet Etching

Fabrication-Friendly On-Chip Silicon Polarizer Based on Polarization-Selective Corner Mirrors

Experimental research on ultracompact silicon hybrid plasmonic nanofocusing device

Perfect mid-infrared dual-band optical absorption realized by a simple lithography-free polar dielectric/metal double-layer nanostructure

Compact transverse-magnetic-pass polarizer with a subwavelength grating based on a hybrid silicon-lithium niobate on insulator platform

Fabrication and characterization of high extinction ratio transmission polarizers

Low-cost High Integration IR Polymer Microlens Array.

Fabrication of Ultra-Low-Loss, Dispersion-Engineered Silicon Nitride Photonic Integrated Circuits via Silicon Hardmask Etching

Low Loss, Compact Tm-Pass Polarizer Based on Hybrid Plasmonic Grating

Monolithically Integrated Circular Polarizers with Two-Layer Nano-Gratings Fabricated by Imprint Lithography

The polarization modulation and fabrication method of two dimensional silica photonic crystals based on UV nanoimprint lithography and hot imprint

Fabrication and Characterization of Bilayer Metal Wire-Grid Polarizer Using Nanoimprint Lithography on Flexible Plastic Substrate

Fabrication of Large Area Subwavelength Antireflection Structures on Si Using Trilayer Resist Nanoimprint Lithography and Liftoff

1D partially oxidized porous silicon photonic crystal reflector for mid-infrared application

Demonstration of an on-chip TE-pass polarizer using a silicon hybrid plasmonic grating

Low-Loss Silicon Platform for Broadband Mid-Infrared Photonics