Abstract:This article presents ultra-wideband and low-noise distributed active quasi-circulators (QCs) fabricated using a 28-nm CMOS process. The proposed active QCs use a differential two-stage distributed amplifier (DA) design, where the electrical length of the input and output transmission lines is 90 $^\circ$ at 28 GHz. For the ultra-wideband distributed active QC (UWQC), the differential outputs of the amplifier in the second stage are cross-connected to the differential outputs of the amplifier in the first stage, resulting in ultra-wideband isolation regardless of the frequency. In addition, an interstage inductor is inserted in the amplifiers to maintain the frequency response of the input and output transmission lines identically. For the low-noise distributed active QC (LNQC), the resistive termination at the input transmission line of DA is eliminated by using input-matched amplifiers, resulting in a low antenna (ANT) -to-receiver (RX) noise figure (NF). In addition, the LNQC with the input-matched amplifiers allows a 3-dB higher transmitter (TX)-to-ANT gain compared to conventional distributed QC. Moreover, the transistor size and bias condition of the input-matched amplifiers can be selected to achieve low noise and high power handling capability of the QC within a given tradeoff. The measured results demonstrate that the UWQC achieves 20.5 $-$ 35.5-GHz wideband operating bandwidth with TX-to-ANT gain of 4.5 dB, ANT-to-RX insertion loss of 3.6 dB, and $>$ 21-dB TX-to-RX isolation, only occupying a die area of 0.07 mm $^2$ . The LNQC achieves ANT-to-RX NF of 8.9 $-$ 11.1 dB, which is around 10 dB lower than the conventional distributed QC. The measured TX-to-ANT output power 1-dB compression point is 14.3 dBm with a dc power consumption of 28.6 mW, occupying a die area of 0.25 mm $^2$ .

A Dual Interference-Canceling Active Quasi-Circulator Achieving 36-Db Isolation over 6-Ghz Bandwidth

A Highly-integrated Non-magnetic Passive Circulator Based on Rotary Traveling-wave Oscillator and Spatio-temporal Conductivity Modulation in 130 Nm CMOS

Integrated Active Quasi-Circulator with 27 Db Isolation and 0.8–6.8ghz Wideband by Using Feedback Technique

A Wideband Active Quasi-Circulator with 34-Db Isolation and Insertion Loss of 2.5 Db

A Full-duplex Transceiver with Integrated Active Quasi-circulator Achieving Self-interference RF Cancellation over Wide Bandwidth

A Wideband Quasi-Circulator with Low NF and High P-1dB Using Noise-Canceling Technique

An Ultra-Low Power K band Balanced Frequency Doubler with a Novel Current-reused Structure

Tunable Quasi-Circulator Based on a Compact Fully-Reconfigurable 180° Hybrid for Full-Duplex Transceivers.

Low NF and High P1dB Wideband Quasi-Circulator with Unequal Power Split and Reconfigurable Inter-Stage Matching

A survey of active quasi-circulators

A Compact Quasi -Circulator with High Isolation Using Reconfigurable 180° Hybrid

Active Quasi-Circulator Based on Wilkinson Power Divider for Miniaturized Wireless Communication System

A High-Isolation Duplexer with Mismatched Load Impedance for Integrated Sensing and Communication

Design of CMOS Integrated Circulator Based on Sequentially Switched Delay Lines with Body-Floating and Clock Boosting Techniques

Compact mm-Wave Ultra-Wideband and Low-Noise Phase Alternately Distributed Quasi-Circulators

A Wideband Full-Duplex Receiver with Multi-Domain Self-Interference Cancellation Based on Capacitor Stacking Delay and Delay Compensation in Cancellers

A 0.5-to-3ghz Full-Duplex Receiver with 27db Self-Interference-Cancellation.

A 0.2~3.8-GHz Full-Duplex Receiver With More Than 25 dB Self-Interference Cancellation Using a C-DAC-Based Vector Canceller

A 0.2~3.8-Ghz Full-Duplex Receiver with More Than 25 Db Self-Interference Cancellation Using a C-DAC-Based Vector Canceller.

A Low-Noise Dual-Path Self-Interference Cancellation Architecture for Watt-Level TX Power Handling in Simultaneous Transmit and Receive

A 0.5-4Ghz Full-Duplex Receiver with Multi-Domain Self-Interference Cancellation Using Capacitor Stacking Based Second-Order Delay Cells in RF Canceller