Abstract:This paper presents the design and measurement of an IEEE 802.11ad standard compatible RF transceiver for 60 GHz wireless communication systems. In addition to the traditional half-duplex (HD) mode, this work supports full-duplex (FD) operations to deliver better channel utilization and faster response times for the system. The isolation between the transmitter and receiver from the architecture design to system integration for FD operations has been fully considered. A digital self-interference cancellation (DSIC) is implemented in MATLAB to verify the FD performance. The super-heterodyne architecture with an intermediate frequency (IF) of 12 GHz is designed to suppress the image frequencies without using extra filters. A flexible phase-locked loop (PLL) synthesizer provides a local oscillator (LO) frequency with a 2 kHz resolution. Other than the time division duplex (TDD) mode used in the conventional 60 GHz system, a wide-bandwidth baseband digital variable-gain amplifier (DVGA) with a 3 dB bandwidth of more than 4 GHz also supports frequency division duplex (FDD) operations. The transceiver chip is fabricated using the Tower Jazz 0.18 μm SiGe BiCMOS process. With an on-board antenna, the transceiver covers all four channels in the 802.11ad standard, with MCS-12 (7.04 Gbps under 1.76 GSym/s and 16-QAM) under 1.5 m. In the proposed system design, the RF frontend-based self-interference (SI) suppression from the local transmitter to receiver LNA is around 54 dB. To achieve a practical FD application, the SI is further suppressed with the help of a digital SI compensation. The measured power consumption for the transmitter and receiver configurations are 194 mW and 231 mW, respectively, in HD mode and 398 mW for the FDD or FD operation mode.

A 0.5-4Ghz Full-Duplex Receiver with Multi-Domain Self-Interference Cancellation Using Capacitor Stacking Based Second-Order Delay Cells in RF Canceller

A Wideband Full-Duplex Receiver with Multi-Domain Self-Interference Cancellation Based on Capacitor Stacking Delay and Delay Compensation in Cancellers

A 0.2~3.8-GHz Full-Duplex Receiver With More Than 25 dB Self-Interference Cancellation Using a C-DAC-Based Vector Canceller

A 0.2~3.8-Ghz Full-Duplex Receiver with More Than 25 Db Self-Interference Cancellation Using a C-DAC-Based Vector Canceller.

A 0.5-to-3ghz Full-Duplex Receiver with 27db Self-Interference-Cancellation.

Enhanced-Linearity Wideband Full-Duplex Receiver With Shared Self-Interference Canceller

A 0.5-8Ghz Reconfigurable CMOS RF Receiver Front-end for CR and DPA Applications

Three-dimensional circuit integration based on self-synchronized RF-interconnect using capacitive coupling

A 100mhz-2ghz Wireless Receiver In 40-Nm Cmos For Software-Defined Radio

A 56 – 65 GHz Highly-Integrated FMCW Radar Transceiver with 7.8 Db NF and 8 GHz Chirp-Bandwidth in 65-Nm CMOS

A Sub-1-GHz Band High-Dynamic-Range Receiver with Integrated Self-Adaptive Multipart AGC Loops

A C-Band Four-Channel Receiver with Current-Sharing and Large-Signal Multigated-Transistor Techniques in 65-Nm CMOS

A 0.18 Um Cmos Programmable Interference Canceller For Cognitive Radio Front-End

Full Duplex Communication with Practical Self-Interference Cancellation Implementation

A Low-Noise Dual-Path Self-Interference Cancellation Architecture for Watt-Level TX Power Handling in Simultaneous Transmit and Receive

Optical Multi-Tap RF Canceller for In-Band Full-Duplex Wireless Communication Systems

Design and Testbed Deployment of Frequency-Domain Equalization Full Duplex Radios

Improved Fractional Delay Method for Canceling the Self-Interference of Full Duplex

A 64GHz full-duplex transceiver front-end with an on-chip multifeed self-interference-canceling antenna and an all-passive canceler supporting 4Gb/s modulation in one antenna footprint

A Full-Duplex 60 GHz Transceiver with Digital Self-Interference Cancellation

Photonic-Assisted RF Self-Interference Cancellation Based on Optical Spectrum Processing