Abstract:This study focused on optimizing the hot forging process for AISI 1045 medium carbon steel ball joints, which is crucial for enhancing both their mechanical properties and production efficiency. Traditional hot forging processes often face challenges due to variations in flow stress and microstructural outcomes, which can result in a suboptimal product performance. To address these challenges, this research employed the Taguchi method in conjunction with a finite element (FE) simulation to identify the optimal forging parameters. The Arrhenius constitutive model, based on the Zener–Hollomon parameter, was applied to predict the flow stress with a high level of accuracy, achieving a coefficient of determination (R2) of 0.968 and an average absolute relative error (AARE) of 7.079%. An analysis of variance (ANOVA), a statistical innovation that partitions the total variation into components linked to key process factors, was utilized to determine the significance of these parameters. The ANOVA revealed that the billet temperature played a significant role in influencing the preforming force, finishing force, and mean stress, with a maximum impact of 62.30%, 59.50%, and 94.20% on the variation in the response variable, respectively. Additionally, the friction factor significantly affected the preforming and finishing forces, contributing 36.19% and 38.28%. The validation of the model through both simulations and practical experiments is a testament to the reliability of this research, demonstrating the accuracy of the model with minimal discrepancies in the forging forces and exhibiting errors of just 2.88% and 3.40%. Furthermore, microstructure modeling successfully predicted the key outcomes, such as the grain size and pearlite volume fraction, validating the effectiveness of the simulation in forecasting microstructural characteristics.

Precision Forming of Long-Axis Forgings with Rib-Web Sections Via Billet Optimization Based on Flow Characteristics

Enhancing the Robustness of Rib-Groove Filling and Strain Homogeneity in the Isothermal Forging of Titanium Alloy Multi-Rib Components

Numerical Simulation of Pre-forging for Connecting Rod of Automobile Engine and Optimization of Its Pre-forging Billet

Numerical and experimental investigation on precision forming of ribbed tube by cold drawing process

Cylindrical Billet Size Optimization for Hot Closed-Die Forging of the Upper Ball Joint

A non-sequential isothermal local-loading forming process for large-scale rib-web components

Study on near-net forming technology for bars by axial feed skew rolling based on taper-end billets

Improving the Deformation Uniformity Within Forgings by Applying Preformed Optimization Based on FEM

Flow defects of rib-web components in isothermal local-loading forming process

Casting Design Optimization Using Numerical Simulation of Precision Forging Die for Large Titanium Alloy Integral Bulkhead

Predictive Modeling and Optimization of Hot Forging Parameters for AISI 1045 Ball Joints Using Taguchi Methodology and Finite Element Analysis

Technical review on design optimization in forging

Multi-pass rolling-extrusion of large-scale thin-walled square tube with longitudinal inner ribs

Research and Application of Precision Forging Forming Process for Flat Thin Flash of Automobile Disc Steering Knuckle

Optimization of multi-directional forging parameters of large-scale Mg-Gd-Y-Zn-Zr alloy forged part guided by finite element simulation

Implementation of finite element analysis for solving the constraints in forming process of large steel parts

Study on Rational Width ratio of Anvil and Reduction in FM Forging Process

Forging Tool Shape Optimization Using Pseudo Inverse Approach and Adaptive Incremental Approach

Continuous Extrusion Forming Technology of Magnesium Alloy Thin-Walled Tubules

Optimization of Forging Preforms by Using Pseudo Inverse Approach