Abstract:Al-Mg alloys with high Mg contents have attracted considerable interest given enhanced strength and simultaneously reduced density by high Mg solute concentrations. In the present study, we proposed a strategy of strengthening Al‐10wt%Mg binary alloy via heavy cryogenic rolling at liquid nitrogen temperature. Both cryogenic plastic deformation and a high concentration of Mg solute effectively suppress dynamic recovery during rolling, creating nanoscale and ultra-fine laminated grains containing a high density of dislocations in a nearly single-phase solid solution. The as-rolled Al‐10wt%Mg exhibits an average 0.2% offset tensile yield strength of 619 MPa, and average engineering and true ultimate tensile strengths of 689 and 726 MPa, accompanied by average uniform elongation of 5.3% exceeding the threshold value of 5% required for structural engineering applications. The high strength stems from enhanced solid-solution strengthening of a high concentration of Mg solute, significant grain boundary strengthening of nanoscale and ultra-fine laminated grains, and strong dislocation strengthening. The appreciable ductility can be primarily attributed to a high concentration of Mg solute that can retard dynamic recovery processes during tensile testing by impeding dislocation motion, thus enhancing dislocation accumulation and work-hardening ability. A high concentration of Mg solute combined with cryogenic plastic deformation to a high strain magnitude provides a new avenue to achieve ultrahigh strength and good ductility in non-age-hardened Al-Mg alloys.

High Strength and High Electrical Conductivity CuMg Alloy Prepared by Cryorolling

Work Hardening Behavior and Microstructure Evolution of a Cu-Ti-Cr-Mg Alloy during Room Temperature and Cryogenic Rolling

Reforming Nanostructured CuAg Alloy to Improve Ductility and Electrical Conductivity

Effect of cryogenic rolling and multistage thermo-mechanical treatment on the microstructure and properties of the Cu-0.4Cr-0.39Zn-0.1Mg-0.07Zr alloy

Effect of Cryorolling on Microstructure, Conductivities, and Mechanical Properties of a Cast Near-Eutectic Al-Si-Fe-Mg Alloy

Mechanical property enhancement and microstructure evolution of an Al-Cu-Li alloy via rolling at different temperatures

Microstructure and Properties of Cold Drawing Cu-2.5% Fe-0.2% Cr and Cu-6% Fe Alloys

Microstructure evolution and mechanical properties of Al−3.6Cu−1Li alloy via cryorolling and aging

Microstructure and properties of Cu-Cr-Zr (Mg) alloys subjected to cryorolling and aging treatment

Effect of Deep-Cooling Rolling Deformation on the Microstructure and Mechanical Properties of an Al-4.5Cu-1.5Mg-0.6Mn-0.2Ti Alloy

Microstructure and Properties of Cold Rolled Cu_(88)Fe_(12) Alloys

High strength BCC magnesium-Lithium alloy processed by cryogenic rolling and room temperature rolling and its strengthening mechanisms

Microstructure and Properties of Cold Rolled Cu80Fe20 Alloys

Mechanical Properties of Rolled Copper Foils in Cryogenic and Room‐Temperature Environments

Effect of cryogenic rolling on the microstructure and texture of CuCrZr alloy

Effect of Cold Rolling and Aging Treatment on the Microstructure and Properties of Cu–3Ti–2Mg Alloy

Achieving ultrahigh strength in binary Al-10Mg alloy through heavy cryogenic rolling

Effects of cryogenic treatment on microstructure and mechanical properties of AZ31 magnesium alloy rolled at different paths

High Strength and Thermal Stability of Multilayered Cu/Al Composites Fabricated Through Accumulative Roll Bonding and Cryorolling

Microstructure and Properties of High Strength and High Conductivity Cu-0.4Mg Alloy Processed by Upward Continuous Casting and Multi-pass Drawing

Microstructure and properties evolution of Mg–2Y–0.6Nd–0.6Zr alloy rolled at room and liquid nitrogen temperature