Abstract:Piezoelectric thin films on high acoustic velocity nonpiezoelectric substrates, such as ZnO, AlN, or GaN deposited on diamond or sapphire substrates, are attractive for high frequency and low-loss surface acoustic wave devices. In this work, ZnO films are deposited on AlxGa1-xN/c-Al2O3 (0 < or = chi < or = 1) substrates using the radio frequency (RF) sputtering technique. In comparison with a single AlxGa1-xN layer deposited on c-Al2O3 with the same total film thickness, a ZnO/AlxGa1-xN/c-Al2O3 multilayer structure provides several advantages, including higher order wave modes with higher velocity and larger electromechanical coupling coefficient (K2). The surface acoustic wave (SAW) velocities and coupling coefficients of the ZnO/AlxGa1-xN/c-Al2O3 structure are tailored as a function of the Al mole percentage in AlxGa1-xN films, and as a function of the ZnO (h1) to AlxGa1-xN (h2) thickness ratio. It is found that a wide thickness-frequency product (hf) region in which coupling is close to its maximum value, K(2)max, can be obtained. The K(2)max of the second order wave mode (h1 = h2) is estimated to be 4.3% for ZnO/GaN/c-Al2O3, and 3.8% for ZnO/AlN/c-Al2O3. The bandwidth of second and third order wave modes, in which the coupling coefficient is within +/- 0.3% of K(2)max, is calculated to be 820 hf for ZnO/GaN/c-Al2O3, and 3620 hf for ZnO/AlN/c-Al2O3. Thus, the hf region in which the coupling coefficient is close to the maximum value broadens with increasing Al content, while K(2)max decreases slightly. When the thickness ratio of AlN to ZnO increases, the K(2)max and hf bandwidth of the second and third higher wave modes increases. The SAW test devices are fabricated and tested. The theoretical and experimental results of velocity dispersion in the ZnO/AlxGa1-xN/c-Al2O3 structures are found to be well matched.

High-frequency V-doped ZnO/SiC Surface Acoustic Wave Devices with Enhanced Electromechanical Coupling Coefficient

High-Frequency Surface Acoustic Wave Devices Based on ZnO/SiC Layered Structure

High-frequency and High-Temperature Stable Surface Acoustic Wave Devices on ZnO/SiO2/SiC Structure

Enhanced Performance Of Zno/Sio2/Al2o3 Surface Acoustic Wave Devices With Embedded Electrodes

Enhanced Performance of ZnO/SiO 2 /Al 2 O 3 Surface Acoustic Wave Devices with Embedded Electrodes

Enhanced Coupling Coefficient in Dual-Mode ZnO/SiC Surface Acoustic Wave Devices with Partially Etched Piezoelectric Layer

Filtering performance improvement in V-doped ZnO/diamond surface acoustic wave filters

Cost-Effective and High Frequency Surface Acoustic Wave Filters on Zno:Fe/Si for Low-Loss and Wideband Application

High-Performance Surface Acoustic Wave Devices Using LiNbO3/SiO2/SiC Multilayered Substrates

High-Performance Surface Acoustic Wave Devices Using LiNbO 3 /SiO 2 /SiC Multilayered Substrates

Design Study on SAW Devices Based on ZnO/Si Structure

Characteristics of one-port surface acoustic wave resonator fabricated on ZnO/6H-SiC layered structure

Structure With Thin Siox/Sinx Bilayer And Al Electrodes For High-Frequency, Large-Coupling, And Low-Cost Surface Acoustic Wave Devices

Ultra-Wideband Surface Acoustic Wave Filters Based on the Cu/LiNbO3/SiO2/SiC Structure

Characterization of the Surface Acoustic Wave Devices Based on ZnO/nanocrystalline Diamond Structures

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

ZnO film for application in surface acoustic wave device

Ultra flexible pseudo-lamb wave RF resonators based on ZnO/PI and AlN/PI structures

Single-Crystalline LiTaO 3 Film-Based High-Frequency Surface Acoustic Wave Resonators and Electronics Applications

Ultrawide-Band SAW Devices Using SH0 Mode Wave with Increased Velocity for 5G Front-Ends

Analysis of SAW properties in ZnO/AlxGa1-xN/c-Al2O3 structures