Abstract:With the advent of the 5G era, surface acoustic wave (SAW) devices with a larger bandwidth and better temperature stability are strongly required, meanwhile the dimensions of devices are continuously scaling down. In this work, a new layout of ZnO/SiO2/Al2O3 SAW devices with embedded electrodes was developed, and with the help of the finite element method (FEM), the propagation characteristics were simulated. Through adopting embedded electrodes, a large electromechanical coupling coefficient (K2) of 6.6% for the Rayleigh mode can be achieved (5 times larger than that of the conventional ZnO/Al2O3 structure), feasible for wideband SAW devices, and a low acoustic velocity (Vp) of 2960 m/s is exhibited simultaneously, which benefits the miniaturization of SAW devices. The dramatic enhancement of K2 is mainly attributed to the more efficient excitation of SAW in piezoelectric films. Furthermore, a SiO2 overlay is added on the top of the structure to gain an excellent zero temperature coefficient of frequency (TCF). Experimentally, we successfully fabricated SAW one-port resonators based on the proposed structure and good characteristics of high K2, low Vp, and small TCF as simulated were confirmed. Our results show that the proposed structure provides a viable route to design SAW devices with a large bandwidth, small size, and robust temperature compensation for practical use.This article has not yet been cited by other publications.

Achieving Both High Electromechanical Response and Stable Temperature Behavior in Si/SiO2/Al/LiTaO3 Sandwich Structure

Surface Acoustic Wave Devices Based on High Quality Temperature-Compensated Substrates

Zero Temperature Coefficient of Frequency Surface Acoustic Wave Resonator for Narrow-Duplex-Gap Application on SiO2/Al/LiNbO3 Structure

High-Performance Acoustic Wave Devices on LiTaO$_{3}$/SiC Hetero-Substrates

Enhanced Performance Of Zno/Sio2/Al2o3 Surface Acoustic Wave Devices With Embedded Electrodes

A Novel Temperature Stable Composite Substrates for Surface Acoustic Wave Applications

Temperature Stable Amorphous-Teo2/36 Degrees-46 Degrees Y-X Litao3 Substrates For Surface Acoustic Wave Applications

Enhanced Performance of ZnO/SiO 2 /Al 2 O 3 Surface Acoustic Wave Devices with Embedded Electrodes

Temperature stable amorphous-TeO2∕36°–46° Y-X LiTaO3 substrates for surface acoustic wave applications

High Frequency, Low Loss and Low TCF Acoustic Devices on LiTaO3-on-SiC Substrate

Temperature-Compensated High-Frequency Surface Acoustic Wave Device

Exploring Low-Loss Surface Acoustic Wave Devices on Heterogeneous Substrates

Theorectical Optimazation of Surface Acoustic Waves Resonator Based on 37°Y-47°X LINBO3/SIO2/SIC Multilayered Structure

Simulation of Temperature Compensated Waveguiding Layer Acoustic Wave Devices

Study of Loss Mechanisms in Temperature Compensated Surface Acoustic Wave Devices Based on Finite Element Method Analysis Using Hierarchical Cascading Technique

High-frequency and High-Temperature Stable Surface Acoustic Wave Devices on ZnO/SiO2/SiC Structure

Propagation Characteristics of SAW on a ZnO/SiO2/high-velocity-substrate Structure

Single-Crystalline LiTaO 3 Film-Based High-Frequency Surface Acoustic Wave Resonators and Electronics Applications

Structure With Thin Siox/Sinx Bilayer And Al Electrodes For High-Frequency, Large-Coupling, And Low-Cost Surface Acoustic Wave Devices

Single-Crystalline LiTaO3 Film-Based High-Frequency Surface Acoustic Wave Resonators and Electronics Applications