Abstract:High-performance acoustic resonators based on single-crystalline piezoelectric thin films have great potential in wireless communication applications. This paper presents the modeling, fabrication, and characterization of laterally excited bulk resonators (XBARs) utilizing the suspended ultra-thin (~420 nm) LiTaO3 (LT, with 42° YX-cut) film. The finite element analysis (FEA) was performed to model the LT-based XBARs precisely and to gain further insight into the physical behaviors of the acoustic waves and the loss mechanisms. In addition, the temperature response of the devices was numerically calculated, showing relatively low temperature coefficients of frequency (TCF) of ~−38 ppm/K for the primary resonant mode. The LT-based XBARs were fabricated and characterized, which presents a multi-resonant mode over a wide frequency range (0.1~10 GHz). For the primary resonance around 4.1 GHz, the fabricated devices exhibited a high-quality factor (Bode-Q) ~ 600 and piezoelectric coupling (kt2) ~ 2.84%, while the higher-harmonic showed a greater value of kt2 ~ 3.49%. To lower the resonant frequency of the resonator, the thin SiO2 film (~20 nm) was sputtered on the suspended device, which created a frequency offset between the series and shunt resonators. Finally, a ladder-type narrow band filter employing five XBARs was developed and characterized. This work effectively demonstrates the performance and application potential of micro-acoustic resonators employing high-quality LT films.

Single-Crystalline LiTaO3 Film-Based High-Frequency Surface Acoustic Wave Resonators and Electronics Applications

Single-Crystalline LiTaO 3 Film-Based High-Frequency Surface Acoustic Wave Resonators and Electronics Applications

Heterogeneous integration of lithium tantalate thin film on quartz for high performance surface acoustic wave resonator

High-Performance Acoustic Wave Devices on LiTaO$_{3}$/SiC Hetero-Substrates

High Frequency, Low Loss and Low TCF Acoustic Devices on LiTaO3-on-SiC Substrate

Single-crystalline LiNbO 3 film based wideband SAW devices with spurious-free responses for future RF front-ends

High Q Lateral-Field-Excited Bulk Resonator Based on Single-Crystal LiTaO₃ for 5G Wireless Communication

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

Exploring Low-Loss Surface Acoustic Wave Devices on Heterogeneous Substrates

A 5.5 GHz S3 Mode Plate Acoustic Wave Resonator Using Lithium Tantalate Thin Film

High-Performance Surface Acoustic Wave Devices Using LiNbO 3 /SiO 2 /SiC Multilayered Substrates

High-Performance Surface Acoustic Wave Devices Using LiNbO3/SiO2/SiC Multilayered Substrates

LiNbO3 Surface Acoustic Wave Resonators with Large Effective Electromechanical Coupling

Laterally Excited Resonators Based on Single-Crystalline LiTaO3 Thin Film for High-Frequency Applications

Optical colorimetric LiTaO_3 wafers for high-precision lithography on frequency control of SAW devices

A Spurious-Free SAW Resonator with Near-Zero TCF Using LiNbO3/SiO2/quartz

High-Frequency Surface Acoustic Wave Devices Based on ZnO/SiC Layered Structure

Spurious-Free SAW Filters with Inherent Suppression of Transverse Modes on LiTaO3/SiO2/Quartz Platform

Structure With Thin Siox/Sinx Bilayer And Al Electrodes For High-Frequency, Large-Coupling, And Low-Cost Surface Acoustic Wave Devices

Super High Frequency Lithium Niobate Surface Acoustic Wave Transducers Up to 14 Ghz

High-frequency V-doped ZnO/SiC Surface Acoustic Wave Devices with Enhanced Electromechanical Coupling Coefficient