Abstract:Surface acoustic waves (SAWs) are of practical importance across several fields. Particularly, a wide range of SAW devices is available, which are based on the stacking piezoelectric layered hetero-structures. As such, efficient and stable algorithm of analyzing electromechanical coupling factor (K2) should be of specific interest, inspiring a variety of piezoelectric layered structures. Motivated by the above considerations, this paper exploits the performance of Sc43% AlN57%/ZnO/diamond piezoelectric hetero-structures using matrix and polynomial methods. Consequently, dispersion curves, the electromechanical coupling factor and profiles of Rayleigh waves are calculated, in which the properties of hexagonal intermediate ZnO layer are varied. Here, $$ (0001) - [10\bar{1}0]{\text{ZnO}} $$ or $$ (11\bar{2}0) - [0001]{\text{ZnO}} $$ directions of the middle layer were integrated with Sc43% AlN57%/diamond to be a composite hetero-structure with a larger K2 of SAW. Accordingly, a commercial ZnO specimen was characterized by scanning electron microscopy (SEM) as well as Raman and XRD spectroscopy to determine its available crystallographic directions and the C-axis hexagonal character. Comparing with conventional AlN/diamond hetero-structures, the inclusion of ZnO as the intermediate layer provides with an excellent electromechanical coupling factor which significantly improves the $$ (11\bar{2}0) - [0001] $$ structure. However, comparing with the ZnO/diamond hetero-structure, a high phase velocity (Vph) was observed. Therefore, the development of a well-balanced structure that maximizes the values of Vph and K2 is systematically challenging. Moreover, it was found that initial stresses have a significant effect on the Rayleigh wave velocities. Fundamental A0 Lamb mode can be generated in piezoelectric hetero-structures when the properties of substrate remain very low relative to the film. Numerical results obtained in this paper can provide a deeper insight into the nature of the Rayleigh wave behaviors in piezoelectric hetero-structures, involving a ZnO intermediate layer.

Simulation of Temperature Compensated Waveguiding Layer Acoustic Wave Devices

Temperature-Compensated High-Frequency Surface Acoustic Wave Device

Surface Acoustic Wave Devices Based on High Quality Temperature-Compensated Substrates

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

Propagation Characteristics of SAW on a ZnO/SiO2/high-velocity-substrate Structure

Enhanced Performance Of Zno/Sio2/Al2o3 Surface Acoustic Wave Devices With Embedded Electrodes

Achieving Both High Electromechanical Response and Stable Temperature Behavior in Si/SiO2/Al/LiTaO3 Sandwich Structure

The Characterization of Surface Acoustic Wave Devices Based on AlN-Metal Structures.

Influence of a Piezoelectric ZnO Intermediate Layer on Rayleigh Waves Propagating in Sc 43% AlN 57% /zno/diamond Hetero-Structures Subjected to Uniaxial Stress

Systematical Study of the Basic Properties of Surface Acoustic Wave Devices Based on ZnO and GaN Multilayers

Theoretical Study of Thermally Stable Large-Coupling Lithium Niobate SH<sub>0</sub> Plate Wave Resonator

High-frequency and High-Temperature Stable Surface Acoustic Wave Devices on ZnO/SiO2/SiC Structure

Enhanced Performance of ZnO/SiO 2 /Al 2 O 3 Surface Acoustic Wave Devices with Embedded Electrodes

Structure With Thin Siox/Sinx Bilayer And Al Electrodes For High-Frequency, Large-Coupling, And Low-Cost Surface Acoustic Wave Devices

Low temperature coefficient of frequency AlN Lamb wave resonator using groove structure between interdigital transducers

Influence of Displacement and Patterning of Phase Shifters for Piston Mode Operation of Temperature Compensated Surface Acoustic Wave Resonators on SiO2/LiNbO3 Structure

Temperature Compensated Super-High-frequency (2–8 GHz) Surface Acoustic Wave Devices

Temperature stability of ZnO-based Love wave biosensor with SiO2 buffer layer

AlScN-Based Dual-Mode Devices With Temperature Compensated Strategy and Process Optimization

A Multilayered Structure for Packageless Acoustic- Wave Devices with Ultra-Small Sizes

Bimorph material/structure designs for high sensitivity flexible surface acoustic wave temperature sensors