Abstract:In this paper, we study the deformation behavior of nickel-based superalloys by in-situ EBSD and uniaxial tensile tests. This study mainly focuses on the microstructure evolution in the same area of the sample during deformation, including the evolution of various types of grain boundaries, geometrically necessary dislocations, grain orientations and texture, and their effect on the mechanical properties. The results show that the rotation of grains is closely related to their initial orientation during deformation. The lattice of grain is rotated to a certain extent to accommodate the more favorable orientation under low strain, leading to higher Schmid factors for the sample. Under large stresses, the grains occur deformation, multiple slip systems start simultaneously or alternately and the Schmid factors value gradually tends to stabilize at a lower level. Meanwhile, the texture orientation density of the initial Rotating cubic {001} texture, α-fiber (RD// ) texture, and γ-fiber (ND // ) gradually decrease or even disappears, while the texture orientation density of Copper {112} and Goss {011} increases during uniaxial tensile deformation for Cr20Ni80 alloy. Grain rotation may be a result of large strain due to stress triaxiality and resulting plane stress condition owing to specimen dimension, which is beneficial to improve the plastic deformability of the alloy. Interestingly, with the increase of strain, the average misorientation angle first decreases and then increases, which is associated with the dislocation density. In addition, serious torsion occurs in the grains during this process, forming a large number of substructures. These substructures result in grain refinement and the Hall-Petch effect. In fact, during the deformation process, multiple strengthening mechanisms act in coordination, leading to an increase in the strength of the alloy.

Cube Orientation Bands Observed in Largely Deformed Al-Sc Alloys Containing Shearable Precipitates

Evolution of cube texture in strip-cast non-oriented silicon steels

Formation mechanism of Cube texture components ({001} ) associated with dynamic recrystallization during compression in the single BCC phase region of Ti-22Al-25Nb alloy

Formation Mechanism of Cube Texture Components ({001}<100>) Associated with Dynamic Recrystallization During Compression in the Single BCC Phase Region of Ti-22Al-25Nb Alloy

Orientation dependent pinning of (sub)grains by dispersoids during recovery and recrystallization in an Al-Mn alloy

Evolution of the Shear Band in Cold-Rolling of Strip-Cast Fe-1.3% Si Non-Oriented Silicon Steel

Micro-process of Cube Texture Formation in High Purity Aluminum Foils by Cross Shear Rolling

In-situ observations of static recrystallization and texture formation in a cold-rolled CoCrFeMnNi high entropy alloy

Interfacial Segregation and Precipitates Behavior in the Ultrafine Grained Al-based Metal Matrix Composites

Deformation And Annealing Textures Of Extruded And Cold Rolled Pure Ni Single Crystals Of Cube Orientation

Local Texture Evolution during Rolling Deformation of Single Crystals of {100} Orientation

Evolutions of Cube ({001} ) and {115} Orientations in Cold-Rolled Ultra-Thin Non-Oriented Silicon Steel

In-situ EBSD investigation of the effect of orientation on plastic deformation behavior of a single crystal superalloy

An SEM/EBSD study of shear bands formation in Al-0.23%wt.Zr alloy deformed in plane strain compression

Development of the Cube Texture at Low Annealing Temperatures in Highly Rolled Pure Nickel

Influence Of Recrystallization Annealing On The Cube Texture In High-Purity Aluniinuni Foils

In-situ EBSD study of deformation behavior of nickel-based superalloys during uniaxial tensile tests

Investigating the origin of cube texture during static recrystallization of fcc metals : A full field crystal plasticity-phase field study

Dislocation slips assisted grain rotation and specific texture evolution in a CoCrNi medium entropy alloy

γ′-size effect on the deformation microstructure and texture in a Ni-based superalloy using in-situ neutron diffraction

Cast Microstructure and Crystallographic Features of Al3Sc Dendrites in High Sc-Contained Al-Sc Alloys