Abstract:Cr2AlB2 and Cr4AlB4 are members of the MAB phases that exhibit unique properties of both metals and ceramics. However, despite these unique characteristics, Cr2AlB2 and Cr4AlB4 phase coatings have not been widely investigated. In this study, Cr2AlB2 and Cr4AlB4 MAB phase coatings were fabricated by magnetron sputtering at room temperature and post-annealing. A composite target, consisting of a phase-pure disc-shaped CrB target overlapped by uniformly dispersed fan-shaped Al slices, was placed parallel to the substrates. The Al content of the coatings was adjusted by altering the areal proportion of the Al slices. MAB phases have crystallized upon post-annealing the as-deposited coatings on Al2O3(0001) substrates in Ar. The phase compositions and morphologies of the crystalline coatings were found to be dependent on the Al content and the annealing temperature. As-deposited coatings with a Cr:Al:B ratio close to 2:1:2 could crystallize as pure and dense Cr2AlB2 phases within the temperature range of 650–800 °C; higher annealing temperatures resulted in the decomposition of Cr2AlB2, while crystallization at lower temperatures was not evident from X-ray diffraction. As-deposited coatings with a Cr:Al:B ratio close to 3:1:3, despite containing a relatively higher Al content than required by the stoichiometry of Cr4AlB4, exhibited insufficient crystallization of Cr4AlB4 with unknown phases below 840 °C. Higher annealing temperatures resulted in the coexistence of Cr4AlB4 and CrB, indicating that achieving phase-pure and well-crystallized Cr4AlB4 coatings proved challenging, possibly due to the inevitable loss of Al during annealing. The configuration of the composite target and the substrates provides a promising strategy for fabricating phase-pure and dense Cr2AlB2 coatings.

Phase Pure and Well Crystalline Cr2AlB2: A Key Precursor for Two-Dimensional CrB

Fabrication of Cr2AlB2 and Cr4AlB4 MAB Phase Coatings by Magnetron Sputtering and Post-Annealing

Ternary-layered Cr2AlB2 synthesized from Cr, Al, and B powders by a molten salt-assisted method

Analysis on Phase Stability and Mechanical Property of Newly-discovered Ternary Layered Boride Cr<sub>4</sub>AlB<sub>4</sub>

Phase Stability and Mechanical Property of Newly-discovered Ternary Layered Boride Cr4AlB4

Novel MAB phases and insights into their exfoliation into 2D MBenes

Phase Stability and Weak Metallic Bonding Within Ternary-Layered Borides CrAlB, Cr2AlB2, Cr3AlB4, and Cr4AlB6

Novel High-Pressure Phases of Alp from First Principles

AlM2B2 (M=Cr, Mn, Fe, Co, Ni): a group of nanolaminated materials

Universal Phase Transitions Of Alb2-Type Transition-Metal Diborides

Phase Formation Route of Cr2alc Ceramics from Cr, Al and Graphite Powders

Effects of Doped Elements (Si, Cr, W and Nb) on the Stability, Mechanical Properties and Electronic Structures of MoAlB Phase by the First-Principles Calculation

New MAX‐Phase Compounds in the V–Cr–Al–C System

In‐Plane Chemical Ordering (Mo2/3R1/3)2AlB2 (R = Tb, Dy, Ho, Er, Tm, and Lu) i‐MAB Phases and their Two‐Dimensional Derivatives (MBene): Synthesis, Structure, Magnetic, and Supercapacitor Performance

First-principles Calculations on Ti2AlB2, Ti3AlB4 and Ti4AlB6, Three Potential New Members of the Orthorhombic MAB Phase

Structural, elastic, mechanical, electronic, damage tolerance, fracture toughness, and optical properties of Cr–Al–B MAB phases studied by first-principles calculations

Exfoliation of Two-Dimensional Nanosheets of Metal Diborides

Molten salt synthesis of orthorhombic CrB and Cr2AlB2 ceramics

Phase stability, elastic and electronic properties of Cr2TiAlC2: A new ordered layered ternary carbide

Density functional theory insights into ternary layered boride MoAlB

Theoretical Prediction and Synthesis of (Cr 2/3 Zr 1/3 ) 2 AlC i -MAX Phase