Abstract:High Temperature Superconducting (HTS) tapes have crucial applications for generating high magnetic fields with minimal power input. Given a single tape has a limited current-carrying capacity, stacked tapes are common, fabricated through methods like solder soldering or epoxy impregnation requiring heat treatment. In this work, we have investigated the efficient region for vacuum heat treatment applicable of commercial HTS tapes, analyzed the thermal degradation principles and accordingly proposed a controlled heat treatment process for stacked HTS tapes to achieve more precise regulation of the critical current (I_c). This heat treatment process was explored using a specialized multi-temperature zone vacuum system. Critical parameters in this process include heat treatment temperature, duration and pressure on the tape. A series of experiments were conducted at 77 K in a self-field to investigate how these parameters affect the superconductivity performance of stacked HTS tapes. Based on the experimental results, an optimal heat treatment process has been proposed. Under the current process, with the heat treatment temperature set at 200 °C, duration at 20 min, and pressure on the tape at 12 MPa, the samples exhibit favourable properties characterized by a smooth and neat appearance without defects such as pinholes or false soldering, and the superconductivity performance can be consistently maintained at more than 97%. The obtained measurements were compared with simulated results, demonstrating an error margin within 0.5%. Moreover, precise control of I_c is achieved, tailored to tape and stacking specifications, allowing manageable degradation as required. This heat treatment process for stacked HTS tapes holds significant importance, especially in the context of designing cable-in-conduit conductors (CICCs) fabricated with stacked HTS tapes. It serves as a valuable reference for further advancements in this field.

Failure Analysis of YBCO Tapes Considering the Amplitude and Duration of Sinusoidal Overcurrent

Research on Fault Current Endurance Capability of Concentric HTS Cable

Study on the Influence of Skin Effect on AC Loss of YBCO Tape

Continuous Critical Current Measurement of High-Temperature Superconductor Tapes with Magnetic Substrates Using Magnetic-Circuit Method.

Comparative study of current carrying capacity between 1G and 2G HTS tape samples at different temperatures and magnetic fields

Determination of I-V Curves of HTS Tapes From The Frequency Dependent AC Transport Loss

A Method for Continuous Measurement of Critical Current of HTS Tapes Using Magnetic Circuits

An Experimental Investigation of Critical Current and Current Distribution Behavior of Parallel Placed HTS Tapes

Thermal degradation analysis and optimization of controlled heat treatment for stacked high temperature superconducting tapes

Investigations on Quench Recovery Characteristics of High-Temperature Superconducting Coated Conductors for Superconducting Fault Current Limiters

Examination and Analysis of Critical Current Uniformity of Long HTS Tapes by the MCorder

Characterization of I-c Degradation in Bent YBCO Tapes

Design and Performance Tests of a Fault Current-Limiting-Type Tri-Axial HTS Cable Prototype

Research on overcurrent stability of HTS cable for energy pipeline

Characteristics of Bi-2223 HTS Tapes under Short-Circuit Current Impacts in Hybrid Energy Transmission Pipelines

Contactless Measurement of Critical Current of High Temperature Superconductor Tape by Magnetic Circuit.

Observation And Analysis Of Defects In Impregnated Ybco Racetrack Coil

Lamination process of second generation high temperature superconducting tape at Shanghai Superconductor Technology

Method and Apparatus for Continuous Examination of HTS Tape Using Magnetic Circuit

Delamination Properties of YBCO Tapes Under Shear Stress Along the Width Direction

Research and development of high Tc superconducting tapes