Abstract:Methanol steam reforming microreactor is regarded as one of the effective approaches for online hydrogen source for fuel cells and the catalyst support is one of the most important component of microreactors. However, there is great room to improve the performance of microreactor by optimizing the structure of catalyst support. In this study, copper foams with different types of hole arrays were used as catalyst supports for constructing a new type of cylindrical laminated methanol steam reforming microreactor for hydrogen production. A laser processing method was used to fabricate the copper foams with hole arrays and a two-layer impregnation method was used to load the Cu/Zn/AI/Zr catalysts. The sphere-cut tetrakaidecahedrons model of copper foam was established and macroscopic numerical analysis were used to analyze the reactants distribution in copper foams. The optimal distribution of hole arrays of the copper foam was obtained by investigating the reaction characteristics under different flow rates of the reactant, reaction temperatures, and loading amounts of catalyst. The experimental results show that the microreactor for hydrogen production using copper foam with ordered hole arrays shows the higher methanol conversion and hydrogen flow rate comparing the ones without hole array. Because of improvement of the radial distribution uniformity and increase of the axial flow rates of the reactants, the best reaction performance of microreactor for hydrogen production is obtained when the copper foam with the configuration in which the hole size decreases along the radial and axial direction.

Active Impregnation Method for Copper Foam As Catalyst Support for Methanol Steam Reforming for Hydrogen Production

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

High-Performance Catalyst of Methanol Steam Reformer Based on Cu Foam with Nanofiber Architectures

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

Novel Copper Foam with Ordered Hole Arrays As Catalyst Support for Methanol Steam Reforming Microreactor

Optimal Design and Fabrication of Surface Microchannels on Copper Foam Catalyst Support in a Methanol Steam Reforming Microreactor

Development of Centrifugal Coating Device to Load CuZnZr/γ-Al2O3 Catalyst on Porous Substrates for Methanol Steam Reforming

Optimization of Catalyst Loading for Porous Copper Fiber Sintered Felts Used in Methanol Steam Reforming Microreactors

Development of Cylindrical Laminated Methanol Steam Reforming Microreactor with Cascading Metal Foams As Catalyst Support

Development of Methanol Steam Reforming Microreactor Based on Stacked Wave Sheets and Copper Foam for Hydrogen Production

A Performance Study of Methanol Steam Reforming Microreactor with Porous Copper Fiber Sintered Felt As Catalyst Support for Fuel Cells

Porous Copper Fiber Sintered Felts with Surface Microchannels for Methanol Steam Reforming Microreactor for Hydrogen Production

Porous Copper Fiber Sintered Felts: an Innovative Catalyst Support of Methanol Steam Reformer for Hydrogen Production

Hydrogen Production from Methanol Steam Reforming Using Porous Copper Fiber Sintered Felt with Gradient Porosity

Development of centrifugal coating device to load CuZnZr/γ-Al 2 O 3 catalyst on porous substrates for methanol steam reforming

Structured nanoporous copper catalysts prepared by laser powder bed fusion and dealloying for on-board methanol steam reforming

DIMETHYL ETHER STEAM REFORMING FOR HYDROGEN PRODUCTION OVER Cu-Mn/γ-Al2O3 CATALYST

Electrochemical Synthesized Copper Mesh Catalysts for Methanol Steam Reforming

Study on Performance of Laminated Porous Metal Fiber Sintered Felt as Catalyst Support for Methanol Steam Reforming Microreactor

Application of Porous Anodic Alumina Monolith Catalyst in Steam Reforming of Dimethyl Ether: Cu/γ-Al2O3/Al Catalyst Degradation Behaviors and Catalytic Activity Improvement by Pre-Competition Impregnation Method

Sorption-enhanced Methanol Steam Reforming for Hydrogen Production by Combined Copper-Based Catalysts with Hydrotalcites