Abstract:Photoelectrochemical water splitting, consisting of photoanode and photocathode used for water reduction and oxidation, is a potential route to store the solar energy into chemical fuels. In terms of the required earth abundance, cheapness and proper band gap edges (1.12 eV), silicon is an attractive photoelectrode material. Unfortunately, silicon suffered from the instability and low efficiency due to the severe photocorrosion and passivation in the reaction electrolyte, even though limited performance has been achieved for water splitting development. [1-3]. In this work, in order to enhance the stability and photoelectrochemical efficiency, we fabricated silicon-based sandwich photoelectrodes with mediated protection layer of sputtered Molybdenum thin film, which is covered with hand-sprayed MoS2 as the catalyst, as shown in the fig. 1(a). The samples are marked with a, b, c and d separately after different thermal annealing time of 0h, 1h, 2h, 3h in the static Nitrogen atmosphere. After proper annealing, the formed nanoporous surficial structure could be observed in the SEM images (fig. 1(b)) with pore diameters ranging from 10 to 50 nm. These porous networks offer much more active sites for water splitting. The effect of annealing temperature on optical response is shown in fig. 2(a). The UV-Vis spectra show that the annealed surficial MoS2 exhibits extended optical responses to the longer wavelength region, indicating the potential enhanced visible light absorption. What’s more, in the photoluminescence (PL) spectra (Fig. 2(b)), the weaker PL intensity are observed after covering MoS2 on the top surface of Mo and essential annealing process, suggesting the suppressed recommendation of the photoexcited electrons and holes in the interface and therefore improved solar energy conversion. In conclusion, the silicon-based sandwich photoelectrode with enhanced visible light absorption and conversion is fabricated through facile processes. This novel low-cost silicon-based photoelectrode possess potential enhanced efficiency and stability applied in the photoelectrochemical water splitting system. Acknowledgments: The authors gratefully acknowledge the financial support from Norwegian Research Council FRINATEK programme (231416/F20), and China Scholarship Council (CSC, Grant No.201506930002). The Research Council of Norway is acknowledged for the support to the NorFab, project number 245963/F50. References [1] M. J. Kenney, M. Gong, Y. Li, J. Z. Wu, J. Feng, M. Lanza, H. Dai, Science, 343 (6160), 836-840 (2013). [2] S. Hu, M. R. Shaner, J. A. Beardslee, M. Lichterman, B. S. Brunschwig, N. S. Lewis, Science, 344 (6187), 1005-1009 (2014). [3] J. Feng, M. Gong, M. J. Kenney, J., Z. Wu, B. Zhang, Y. Li, H. Dai, Nano Res., 8 (5), 1577–1583 (2015). Figure 1

Photocatalytic H2 evolution of porous silicon derived from magnesiothermic reduction of mesoporous SiO2

Enhanced hydrogen evolution via interlaced Ni 3 S 2 /MoS 2 heterojunction photocatalysts with efficient interfacial contact and broadband absorption

High Performance P-Si/ni3s2 Photocathode for Photoelectrochemical Hydrogen Evolution in Neutral Solution

Surface Engineering of Nanoporous Silicon Photocathodes for Enhanced Photoelectrochemical Hydrogen Production

Photocatalytic H2 Evolution by AgNP@PSi/SiNS Composite Derived from Diamond-Wire Sawing Silicon Waste

Nanoporous Silicon Photocathodes with [Co] Molecular Catalyst for Enhanced Solar-Driven Hydrogen Generation

The Optical Properties of Porous Silicon Produced by Metal-Assisted Anodic Etching

Hydrogen-terminated mesoporous silicon monoliths with huge surface area as alternative Si-based visible light-active photocatalysts

Coupling Ru-MoS2 Heterostructure with Silicon for Efficient Photoelectrocatalytic Water Splitting

Stable Silicon-Based Sandwich Photoelectrode for Efficient Solar Hydrogen Evolution

Dissolution-Induced Surface Reconstruction of Ni0.95Pt0.05Si/p-Si Photocathode for Efficient Photoelectrochemical H2 Production

NiSi 2 /p-Si Schottky Junction Photocathode with a High-Quality Epitaxial Interface for Efficient Hydrogen Evolution

Porous Silicon‐Supported Catalytic Materials for Energy Conversion and Storage

Inverted Pyramid Textured P-Silicon Covered with Co2P As an Efficient and Stable Solar Hydrogen Evolution Photocathode

Enhancing the photoelectrochemical performance of p-silicon through TiO 2 coating decorated with mesoporous MoS 2

Wox-Carbon Nanorods Catalyzed Photoelectrochemical Hydrogen Evolution Reaction of Silicon-Photocathode in Acidic Media

Direct Preparation of Hierarchical Macroporous Β-Sic Using SiO2 Opal As Both Template and Precursor and Its Application in Water Splitting

Hydrogen generation via water splitting with hexagonal silicon monolayers as (photo)catalysts

Manipulating metal-oxygen local atomic structures in single-junctional p-Si/WO3 photocathodes for efficient solar hydrogen generation

SiI2 monolayer as a promising photocatalyst for water splitting hydrogen production under the irradiation of solar light

Two-Dimensional Polarized Blue P/SiS Heterostructures as Promising Photocatalysts for Water Splitting