Abstract:Photoelectrochemical water splitting, consisting of photoanode and photocathode used for water reduction and oxidation, is a potential route to store the solar energy into chemical fuels. In terms of the required earth abundance, cheapness and proper band gap edges (1.12 eV), silicon is an attractive photoelectrode material. Unfortunately, silicon suffered from the instability and low efficiency due to the severe photocorrosion and passivation in the reaction electrolyte, even though limited performance has been achieved for water splitting development. [1-3]. In this work, in order to enhance the stability and photoelectrochemical efficiency, we fabricated silicon-based sandwich photoelectrodes with mediated protection layer of sputtered Molybdenum thin film, which is covered with hand-sprayed MoS2 as the catalyst, as shown in the fig. 1(a). The samples are marked with a, b, c and d separately after different thermal annealing time of 0h, 1h, 2h, 3h in the static Nitrogen atmosphere. After proper annealing, the formed nanoporous surficial structure could be observed in the SEM images (fig. 1(b)) with pore diameters ranging from 10 to 50 nm. These porous networks offer much more active sites for water splitting. The effect of annealing temperature on optical response is shown in fig. 2(a). The UV-Vis spectra show that the annealed surficial MoS2 exhibits extended optical responses to the longer wavelength region, indicating the potential enhanced visible light absorption. What’s more, in the photoluminescence (PL) spectra (Fig. 2(b)), the weaker PL intensity are observed after covering MoS2 on the top surface of Mo and essential annealing process, suggesting the suppressed recommendation of the photoexcited electrons and holes in the interface and therefore improved solar energy conversion. In conclusion, the silicon-based sandwich photoelectrode with enhanced visible light absorption and conversion is fabricated through facile processes. This novel low-cost silicon-based photoelectrode possess potential enhanced efficiency and stability applied in the photoelectrochemical water splitting system. Acknowledgments: The authors gratefully acknowledge the financial support from Norwegian Research Council FRINATEK programme (231416/F20), and China Scholarship Council (CSC, Grant No.201506930002). The Research Council of Norway is acknowledged for the support to the NorFab, project number 245963/F50. References [1] M. J. Kenney, M. Gong, Y. Li, J. Z. Wu, J. Feng, M. Lanza, H. Dai, Science, 343 (6160), 836-840 (2013). [2] S. Hu, M. R. Shaner, J. A. Beardslee, M. Lichterman, B. S. Brunschwig, N. S. Lewis, Science, 344 (6187), 1005-1009 (2014). [3] J. Feng, M. Gong, M. J. Kenney, J., Z. Wu, B. Zhang, Y. Li, H. Dai, Nano Res., 8 (5), 1577–1583 (2015). Figure 1

Amorphous oxygen-rich molybdenum oxysulfide Decorated p-type silicon microwire Arrays for efficient photoelectrochemical water reduction

NiS-MoS2 Hetero-Nanosheet Array Electrocatalysts for Efficient Overall Water Splitting

MoS 2 -wrapped silicon nanowires for photoelectrochemical water reduction

Silicon Decorated with Amorphous Cobalt Molybdenum Sulfide Catalyst As an Efficient Photocathode for Solar Hydrogen Generation.

Synergism of Interface and Electronic Effects: Bifunctional N-Doped-Ni3S2/N-Doped-MoS2 Heteronanowires for Efficient Electrocatalytic Overall Water Splitting.

Enhancing the photoelectrochemical performance of p-silicon through TiO 2 coating decorated with mesoporous MoS 2

Ultrathin MoS2-coated Ag@Si Nanosphere Arrays As an Efficient and Stable Photocathode for Solar-Driven Hydrogen Production.

Sauna-like process prepared periodic molybdenum metal catalytic electrodes and their applications in water reduction

In Situ Assembly of MoS x Thin‐Film through Self‐Reduction on p‐Si for Drastic Enhancement of Photoelectrochemical Hydrogen Evolution

Molybdenum-supported amorphous MoS3 catalyst for efficient hydrogen evolution in solar-water-splitting devices

Molybdenum Disulfide/silver/p-Silicon Nanowire Heterostructure with Enhanced Photoelectrocatalytic Activity for Hydrogen Evolution

Enhancement of Photoelectrochemical Hydrogen Evolution of P-Type Silicon Nanowires Array by Loading MoS2

Stable Silicon-Based Sandwich Photoelectrode for Efficient Solar Hydrogen Evolution

Polytype 1T/2H MoS2 Heterostructures for Efficient Photoelectrocatalytic Hydrogen Evolution

Mesoporous Ultrathin In 2 O 3 Nanosheet Cocatalysts on a Silicon Nanowire Photoanode for Efficient Photoelectrochemical Water Splitting

A Universal Process: Self-Templated and Orientated Fabrication of XMoO 4 (X: Ni, Co, or Fe) Nanosheets on MoO 2 Nanoplates as Electrocatalysts for Efficient Water Splitting

MoS2–CoS2 Heteronanosheet Arrays Coated on Porous Carbon Microtube Textile for Overall Water Splitting

Manipulating metal-oxygen local atomic structures in single-junctional p-Si/WO3 photocathodes for efficient solar hydrogen generation

Evident Enhancement of Photoelectrochemical Hydrogen Production by Electroless Deposition of M-B (M = Ni, Co) Catalysts on Silicon Nanowire Arrays

Optimization of Light Response and Electron Redistribution of Active Sites by Structuring CoS2/MoS2/Ni3S2 Heterojunction for Highly Efficient Photo-Assisted Oxygen Evolution

MoS 2 modified NiFe LDH hierarchical structure as efficient photoanode towards photoelectrochemical water splitting