Abstract:The nano/microstructuring of silicon (Si) via chemical methods has garnered significant attention due to its excellent light-trapping capabilities across a wide spectral range. Current research has predominantly focused on the synthesis of pyramidal-shaped microtextures, which enable two reflections on the surface, while largely overlooking the superior light-trapping potential of inverted pyramid silicon (SiIP) microtextures, which theoretically allow for three reflections. Moreover, there has been limited investigation into the application of inverted pyramid black silicon for solar-driven hydrogen evolution. This study reports the synthesis of uniformly arranged inverted pyramid-textured black silicon using the copper-assisted chemical etching (Cu-ACE) method to enhance the efficiency of solar-driven water splitting for hydrogen production. The formation mechanism and the influence of copper-localized surface plasmon resonance (Cu-LSPR) from Cu nanoparticle (NP) byproducts on photoelectrochemical (PEC) activity were systematically analyzed. To reduce sidewall defects and minimize photogenerated carrier recombination, the surface of the SiIP was treated with tetramethylammonium hydroxide (TMAH). A vertical PN junction was developed through ion implantation to reduce the external bias of the SiIP. Additionally, a uniform TiO2 antireflective layer was deposited via atomic layer deposition (ALD), reducing the average reflectance of the SiIP-T-4 to 5.78 % over the 300-1100 nm wavelength range. MoSx and Pt NPs were electrodeposited to improve the fill factor and enhance HER kinetics. With optimized catalyst loading, the n(+)p-SiIP-T-4/TiO2/Pt 80 mC electrode achieved a photocurrent density of 8.0 mA cm(-2) at 0 V vs. RHE, an applied bias photon-to-current efficiency (ABPE) of 0.93 % at 0.24 V vs. RHE, and a double-layer capacitance (Cdl) of 91 mu F cm(-2). The onset potential (Von) was positively shifted by similar to 1.13 V to 0.49 V vs. RHE compared to a SiIP photocathode, and the photocathode operated continuously at 0 V vs. RHE for 27 h in an acidic electrolyte. These results demonstrate that SiIP has significant potential for PEC hydrogen evolution, with further performance optimization achievable through structural and surface engineering.

NiSi 2 /p-Si Schottky Junction Photocathode with a High-Quality Epitaxial Interface for Efficient Hydrogen Evolution

High Performance P-Si/ni3s2 Photocathode for Photoelectrochemical Hydrogen Evolution in Neutral Solution

Enhanced hydrogen evolution via interlaced Ni 3 S 2 /MoS 2 heterojunction photocatalysts with efficient interfacial contact and broadband absorption

Dissolution-Induced Surface Reconstruction of Ni0.95Pt0.05Si/p-Si Photocathode for Efficient Photoelectrochemical H2 Production

(Invited) Si/NiCoSex Nanorods Photocathode for Enhanced Photoelectrochemical Hydrogen Production

Metal Silicidation in Conjunction with Dopant Segregation: A Promising Strategy for Fabricating High-Performance Silicon-Based Photoanodes

Nickel complex engineered interface energetics for efficient photoelectrochemical hydrogen evolution over p-Si

Highly Efficient NiFe Nanoparticle Decorated Si Photoanode for Photoelectrochemical Water Oxidation

Surface Engineering of Nanoporous Silicon Photocathodes for Enhanced Photoelectrochemical Hydrogen Production

Enhanced Solar Hydrogen Evolution by Laminated Integration of N+P-Siip/Tio2/Pt Inverted Pyramid Black Si Photocathode

Engineering the Siox Interfacial Layer of Si-Based Metal-Insulator-Semiconductor Junction for Photoelectrochemical Hydrogen Production

Silicon-based heterojunction photoanodes modified with copper-bipyridine catalyst for enhanced solar-driven water splitting

Efficient Photoelectrochemical Hydrogen Evolution on Silicon Photocathodes Interfaced with Nanostructured NiP2 Cocatalyst Films.

Unbiased overall photoelectrocatalytic water-splitting over micropyramid Si/In 2 O 3 /CuO/ZnO photocathode and Ni/BiVO 4 photoanode under simulated solar-light illumination

Enhanced Capability of Hydrogen Evolution Photocathode by Laminated Interface Engineering of Co/MoS2 QDs/pyramid-black Si

Interface-engineered silicon photocathodes with a NiCoP catalyst-modified TiO2 nanorod array outlayer for photoelectrochemical hydrogen production in alkaline solution

Efficient N+p-Si Photocathodes for Solar H2 Production Catalyzed by Co-W-S and Stabilized by Ti Buffer Layer

High‐Performance Si Photocathode Enabled by Spatial Decoupling Multifunctional Layers for Water Splitting

Surface/Interface Engineering of Si-Based Photocathodes for Efficient Hydrogen Evolution

Single-Crystal Integrated Photoanodes Based on 4 H-SiC Nanohole Arrays for Boosting Photoelectrochemical Water Splitting Activity

High Performance N + P-Si/ti/nis X O Y Photocathode for Photoelectrochemical Hydrogen Evolution in Alkaline Solution