Abstract:In high-performance Al-Cu-Li alloys with low Li-content, δ′-precipitates exist often by enveloping the Guinier-Preston zones and θ′-precipitates, forming so-called composite phases or precipitates. Using atomic-resolution Scanning transmission electron microscopy and energy calculations, we studied these composite phases for their interface structures and microstructure evolution in relation with the mechanical property of the alloys. It is found that all the composite phases have similar interface structures in terms of Cu-Li bonding: interfacial Li-atoms are required to occupy the second nearest neighbor sites to interfacial Cu-atoms. Two types of relations, “anti-phase” and “in-phase” relationships, exist between the two sideward δ′-precipitates in the δ′/θ′/δ′ composite precipitates, depending on the number of Cu-layers contained in the inward θ′-precipitate. Furthermore, it is shown that an “anti-phase” composite precipitate has to become an “in-phase” one when the Cu-layers in the θ′-precipitate increase by growing thick from even to odd number, and vice versa. Since thickening of the θ′-precipitates in these composite precipitates has to be accomplished through a layer-by-layer mechanism, their growth involves the switching of interface relationships with significant structure modifications (until the sideward δ′-precipitate adapts to the final optimized interface structure). As such, the coarsening of these precipitates can generally be depressed upon thermal heating, leading to fine precipitate microstructure of the alloys. It is also demonstrated by first-principles calculations that formation of the composite phases greatly lowers the total system energy, owing to significant decrement of interfacial energy as the θ′/Al interfaces are replaced by the Al/δ′/θ′/δ′/Al interfaces.

Atomic-scale Characterization of Interfaces Between 2A70 Aluminum Alloy Matrix and Cu-enriched Layer after Electropolishing

Direct Observation of Atomic-Scale Origins of Local Dissolution in Al-Cu-Mg Alloys

Structure of the Copper–Enriched Layer Introduced by Anodic Oxidation of Copper-Containing Aluminium Alloy

Interfacial Segregation and Precipitates Behavior in the Ultrafine Grained Al-based Metal Matrix Composites

The influence of porosity and precipitates on the corrosion behavior of A356 aluminum alloy

Understanding the Formation Mechanism of Al-Rich Interfacial Layer during Galvanizing of Cu Pre-coated High-Strength Steel Sheet

Fine precipitation scenarios of AlZnMg(Cu) alloys revealed by advanced atomic-resolution electron microscopy study Part I: Structure determination of the precipitates in AlZnMg(Cu) alloys

Characterization of the interfacial micro-zones in C18150Cu/8011Al laminated composites

Insights into precipitation characteristics and strengthening mechanisms in a low Cu/Mg ratio Al-Cu-Mg-Ag alloy

Investigation of the mechanical properties of TiC particle-reinforced Al-Cu alloys: insights into interface precipitation mechanisms and strengthening effects

Influence of Etchants on Etched Surfaces of High-Strength and High-Conductivity Cu Alloy of Different Processing States

Atomic-scale investigation of Si/Al interface in multilayer aluminum sheets using HRTEM and first-principle calculation

A Study of Electroplated Nanoporous Copper Using Aberration-Corrected Transmission Electron Microscopy

Interfacial structure evolution of the growing composite precipitates in Al-Cu-Li alloys

In-Situ Observation and Analysis of the Evolution of Copper Aluminum Composite Interface

Atomic-scale investigation of the heterogeneous precipitation in the E (Al18Mg3Cr2) dispersoid of 7075 aluminum alloy

Regulating solute partitioning utilized to decorate grain boundary for improving corrosion resistance in a model Al-Cu-Mg alloy

Study of the precipitate evolution mechanism in an Al-Mg-Si-Cu alloy with Si-rich and low Cu composition

Microscopic corrosion behavior and first-principles calculations of interfacial diffusion layers of the Cu–Al composite plate

In Situ Atomic Force Microscopy Observations of the Corrosion Behavior of Aluminum‐Copper Alloys