Abstract:Additively manufactured alloys undergo a rapid solidification process followed by thermal cycles, which promotes the microstructures to return to equilibrium. The microstructural behavior therein is especially complicated and inconceivable at times, thereby greatly restricting the tailorability of microstructures for additive manufacturing. To improve the understanding of microstructure formation in rapidly solidified TiAl alloy, Ti-47Al-2Cr-2Nb powders were aging-treated to reveal the microstructural evolution behavior on multiple scales, and the microstructural transformation mechanisms were comprehensively analyzed from the viewpoints of thermodynamics and kinetics. The results show that the rapidly solidified TiAl alloy almost retains the alpha 2 phase, which then transforms into nanolamellar structures or equiaxed gamma microstructures depending on the temperature. The completely different microstructure selections were determined by the competitive growth of lamellar structures and equiaxed gamma grains. More importantly, atypical pathways for lamellar and twinning transformations were first discovered in these microstructural transformation processes. A 6H-type long periodic stacking ordered (LPSO) phase was observed to be in the form of straight laths in the retained alpha 2 phase, and 9R-and 18R-type LPSO phases were discovered in the equiaxed gamma grains. The 6H-type LPSO phase transformed into nano gamma laths, whose formation driving force was deduced to result from the extremely high elastic energy stored in the retained alpha 2 phase. The 9R-and 18R-type LPSO phases transformed into a more stable gamma twin phase to reduce the entire energy of the system. This research may potentially enhance the understanding of the microstructure of additively manufactured TiAl alloy and consequently, the tunability of such microstructure as required. (c) 2022 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Study of Microstructure Evolution and Preference Growth Direction in a Fully Laminated Directional Micro-Columnar TiAl Fabricated Using Laser Additive Manufacturing Technique

Investigation on the Microstructure and Mechanical Behaviors of a Laser Formed Nb-Ti-Al Alloy

Microstructures and Mechanical Behaviors of a Directional Lamellar Ti-48Al-2Cr-2Nb Alloy Produced by Laser Additive Manufacturing

In-situ Investigation of the Anisotropic Mechanical Properties of Laser Direct Metal Deposition Ti6Al4V Alloy

Microstructure characteristics of a γ single-phase Ti-55Al-7.5Nb alloy fabricated via additive manufacturing

Microstructure and Mechanical Properties of Ti60-Ti2alnb Functionally Graded Materials Fabricated by Laser Directed Energy Deposition

Anisotropic Tensile Behavior of Ti-47Al-2Cr-2Nb Alloy Fabricated by Direct Laser Deposition

Atypical Pathways for Lamellar and Twinning Transformations in Rapidly Solidified TiAl Alloy

Structure Evolution of Directionally Solidified Ti-50al Alloy and Lamellar Orientation Control

Study of microstructure and compressive strength of a novel Ti-0.75Al-9.5V alloys manufactured by laser deposition melting

Formation Mechanism of Dilute Region and Microstructure Evolution in Laser Solid Forming TA15/Ti2AlNb Dual Alloy

Chemical, microstructure, and mechanical property of TiAl alloys produced by high-power direct laser deposition

The Directional Solidification, Microstructural Characterization and Deformation Behavior of Β-Solidifying TiAl Alloy

Microstructural Control and Mechanical Properties of Ti–47Al–2Cr–2Nb Alloy by Directional Solidification Electromagnetic Cold Crucible Technique

Microstructure Evolution in Directionally Solidified Ti–(50, 52)at%al Alloys

Effect of Growth Rate on Microstructure Evolution in Directionally Solidified Ti–47Al Alloy

Columnar to Equiaxed Transition During Β Heat Treatment in a Near Β Alloy by Laser Additive Manufacture

Alternative-band microstructure and LPSO phase in TiAl alloy produced by direct laser deposition

Phase transformation mechanism and mechanical properties of Ti-45Al-8Nb alloy prepared by directed laser deposition

Directional Growth of Metastable Phase Γ in Laser-Remelted Ti–Al

Microstructural Control of TiAl–Nb Alloys by Directional Solidification