Abstract:In this work, microstructural characteristics, dynamic recrystallization and mechanical properties of the hot-rolled AZ31B were investigated. The results indicated that the different mechanisms of recrystallization are responsible for the microstructural evolution during the rolling deformation. It was found, as for the specimens with the rolling reduction of 30%, large number of twins are formed within the deformed matrix and the recrystallized grains are usually formed nearby the twins. This indicated that the mechanism of the twin-induced nucleation mainly dominates the recrystallization process of the specimens with the 30% reduction. As for the specimens with the rolling reduction of 75%, the recrystallized grains are nucleated on the bulged boundaries or within the deformed grains. This indicates that the mechanisms of the stress-induced grain boundary migration (SIBM) and the sub-grain growth mainly dominate the recrystallization process of the specimens with the reduction of 75%. The recrystallization process contributes to the grain refinement and to the improvement of mechanical properties of alloys. Eventually, the specimens with the rolling reduction of 75% obtain an excellent strength-ductility balance. The results of this work not only elaborate underlying knowledge on the correlation relationship between the recrystallization mechanisms and the mechanical properties, but provide an effective approach to optimize the microstructure-mechanical properties of alloys.

Tailoring the Rolling Texture of AZ31 Mg Alloy with Calcium and Tin Addition

The Role of Al Content on Deformation Behavior and Related Texture Evolution During Hot Rolling of Mg-Al-Zn Alloys

Recrystallization Behavior and Mechanical Properties of Az31b Alloy During the Hot-Rolling Process

Effect of Al addition and rolling reduction on microstructure and texture evolution of Mg–3Sn alloy during high-speed rolling

Influence Research of Al and Zn Addition for Twin Roll Casting Magnesium During Multi-Pass Hot Rolling

Insights into the evolution of texture and mechanical properties during warm rolling and annealing of Mg–2Zn-0.5Ca alloy

Mechanical Properties and Texture Evolution During Rolling Process of an AZ31 Mg Alloy

Tailoring the Texture and Mechanical Properties of Textured-AZ31 Mg Alloy Sheets by Twinning and Recrystallization

Twinning, Grain Orientation, and Texture Variations in Mg Alloy Processed by Pre-Rolling

The Role of Recrystallization and Grain Growth in Optimizing the Sheet Texture of Magnesium Alloys with Calcium Addition During Annealing

Multiple-twinning induced recrystallization and texture optimization in a differential-temperature-rolled AZ31B magnesium alloy with excellent ductility

Microstructure and Texture Evolution of Az31 Magnesium Alloy During Large Strain Hot Rolling

Texture of AZ31B Magnesium Alloy Sheets Produced by Differential Speed Rolling Technologies

Twinning-mediated Texture Weakening in a Basal-Textured Mg-6Al-1Zn (mass%) Alloy Sheet by a Novel Cold-Sample Rolling Method

Microstructure and Texture Evolution of AZ31 Magnesium Alloy During Rolling

Effect of Rolling Paths and Pass Reductions on the Microstructure and Texture Evolutions of AZ31 Sheet with an Initial Asymmetrical Texture Distribution

Twinning character and texture origination in the randomly-oriented AZ31B magnesium alloy during cold-rolling

The effect of grain size on texture evolution and mechanical properties of an AZ31 magnesium alloy during cold-rolling process

Evolution of Twins and Texture and Its Effects on Mechanical Properties of AZ31 Magnesium Alloy Sheets under Different Rolling Process Parameters

Mechanical properties and texture evolution during hot rolling of AZ31 magnesium alloy

Twinning Behavior of a Strongly Basal Textured AZ31 Mg Alloy During Warm Rolling